Image
Product
Price
- Electric Fuel Pump
- 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 5
- Maximum Pressure: 99.0
- Fuel Type: Gas
- Pump Type: Electric
- Outlet Outside Diameter: 0.313
- Terminal Quantity: 2
- Wiring Harness Included: No
- Position(s): In-line
- System Pressure: 44 Psi
- Terminal Type: Threaded
- Terminal Gender: Male
- Inlet Outside Diameter: 0.313
- Average Flow Rating: 28
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
5211007, 5CA201, 67018, 67033, 67034, 67071, 69100, 69115, 951-3000, 9513000, AFS0001P, AFS0987S, CFD0029, E16020, E16045, E2000, E2002, E2036...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Fuel Delivery Type | CID |
|---|---|---|---|---|---|---|
| 1985 - Ford Mustang | L | - | In-Line | 4 Cyl 2.3L | CARB | 140 |
- For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1985 - Ford Mustang | L | - | 4 Cyl 2.3L | LX | 140 |
- For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1985 - Ford Mustang | V | - | 8 Cyl 5.0L | LX | 302 |
Additional Fitment Information:
| Vehicle | Position | Fuel Delivery Type | Sub Model |
|---|---|---|---|
| 1985 - Ford Mustang | In-Line | CARB | GT |
- High Pressure Pump
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement, 100% leak, flowrate and pressure tested
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
- High flow pumps utilize carbon commutators which increases durability and generates less heat, ensuring longer pump life
This Part Fits the Following OEM/Substitute Numbers:
00210001, 4020110, E2000, SP1121
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Ford Mustang | L | - | In-Line | GAS | 4 Cyl 2.3L | 140 |
- With Brass Outlet Tube From 11/1984
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement, 100% leak, flowrate and pressure tested
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
- High flow pumps utilize carbon commutators which increases durability and generates less heat, ensuring longer pump life
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Ford Mustang | V | - | In-Tank | 6 Cyl 3.8L | 232 |
- With Brass Outlet Tube
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement, 100% leak, flowrate and pressure tested
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
- High flow pumps utilize carbon commutators which increases durability and generates less heat, ensuring longer pump life
This Part Fits the Following OEM/Substitute Numbers:
00210014, 4020116, E2061, SP1148
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Fuel Delivery Type | CID |
|---|---|---|---|---|---|---|
| 1985 - Ford Mustang | V | - | In-Tank | 8 Cyl 5.0L | FI | 302 |
- To 11/1984
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement, 100% leak, flowrate and pressure tested
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
- High flow pumps utilize carbon commutators which increases durability and generates less heat, ensuring longer pump life
This Part Fits the Following OEM/Substitute Numbers:
00210043, 4020159, E2484, SP1152
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Ford Mustang | L | - | In-Tank | 4 Cyl 2.3L | 140 |
- Hi-Performance 190lph; 350hp; Gas; Pump Only
- 350 HP+; 190 lph; Larger Inlet Hole In Center Of Bottom Of Pump To Smaller Port Outlet; Gerotor Style; Pump Only
- Complete hardware kits ensure easy installation and reliable operation. All pumps meet TI Automotive s stringent global OE quality standards.
- Hi-Performance In-Tank Fuel Pump
-
Features:
- Universal Intank Fuel Pump
- TI Automotive is the builder of the most popular fuel pumps and modules for over 60 years under the Walbro brand name. We value this heritage and are proud to continue our legacy of reliability, performance and first-time fit. TI Automotive fuel pumps, fuel pump kits, module assemblies, filters and accessories deliver the feed you need for the power you demand. These products deliver unquestioned fuel flow across a wide pressure range to support outrageous horsepower. TI Automotive fuel pumps are available for in-tank or in-line needs across a variety of fuels featuring the award winning 39/50 in-tank pump and the GSS line featuring the popular 255LPH pump. They deliver high-pressure, high flow performance for engines with more than 500hp. Pump kits, filters and accessories are available to help you with your installation needs and are designed as direct-fit replacements. Our products are engineered to win through decades of technical expertise and by settling for nothing less than superior hot fuel performance. Proudly union made in TI Automotive's Caro, Michigan plant across 5 fuel pump and 14 modules assembly lines. Our fuel pumps and modules are never manufactured or assembled by a third party or sourced from an outside company. Fluid Thinking shapes the mindset of TI Automotive.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery Type | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1985 - Ford Mustang | L | - | 4 Cyl 2.3L | CARB | LX | A | Naturally Aspirated | 140 |
- Hi-Performance 190lph; 350hp; Gas; Pump Only
- 350 HP+; 190 lph; Larger Inlet Hole In Center Of Bottom Of Pump To Smaller Port Outlet; Gerotor Style; Pump Only
- Complete hardware kits ensure easy installation and reliable operation. All pumps meet TI Automotive s stringent global OE quality standards.
- Hi-Performance In-Tank Fuel Pump
-
Features:
- Universal Intank Fuel Pump
- TI Automotive is the builder of the most popular fuel pumps and modules for over 60 years under the Walbro brand name. We value this heritage and are proud to continue our legacy of reliability, performance and first-time fit. TI Automotive fuel pumps, fuel pump kits, module assemblies, filters and accessories deliver the feed you need for the power you demand. These products deliver unquestioned fuel flow across a wide pressure range to support outrageous horsepower. TI Automotive fuel pumps are available for in-tank or in-line needs across a variety of fuels featuring the award winning 39/50 in-tank pump and the GSS line featuring the popular 255LPH pump. They deliver high-pressure, high flow performance for engines with more than 500hp. Pump kits, filters and accessories are available to help you with your installation needs and are designed as direct-fit replacements. Our products are engineered to win through decades of technical expertise and by settling for nothing less than superior hot fuel performance. Proudly union made in TI Automotive's Caro, Michigan plant across 5 fuel pump and 14 modules assembly lines. Our fuel pumps and modules are never manufactured or assembled by a third party or sourced from an outside company. Fluid Thinking shapes the mindset of TI Automotive.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery Type | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1985 - Ford Mustang | L | - | 4 Cyl 2.3L | CARB | LX | A | Naturally Aspirated | 140 |
Showing 1 - 10 of 10 products
Loading...