Image
Product
Price
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1985 - Toyota Pickup | L | 2366 | 4 Cyl 2.4L | RN60 | - |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1985 - Toyota Pickup | L | 2366 | 4 Cyl 2.4L | RN60 | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Mechanical type;in-line
Additional Fitment Information:
| Vehicle | Fuel Delivery Type |
|---|---|
| 1985 - Toyota Pickup | CARB |
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement, 100% leak, flowrate and pressure tested
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
- High flow pumps utilize carbon commutators which increases durability and generates less heat, ensuring longer pump life
This Part Fits the Following OEM/Substitute Numbers:
00210100, 4020121, E8023, SP1129
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Toyota Pickup | L | 2446 | 4 Cyl 2.4L | - |
Additional Fitment Information:
| Vehicle | Fuel Type | Fuel Delivery Type | Aspiration |
|---|---|---|---|
| 1985 - Toyota Pickup | GAS | FI | Naturally Aspirated |
Additional Fitment Information:
| Vehicle | Fuel Type | Fuel Delivery Type | Aspiration |
|---|---|---|---|
| 1985 - Toyota Pickup | GAS | FI | Naturally Aspirated |
- Electric Fuel Pump
- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 6
- Maximum Pressure: 125.0
- Fuel Type: Gas
- Pump Type: Electric
- Outlet Outside Diameter: 0.375
- Terminal Quantity: 2
- Wiring Harness Included: No
- Position(s): In-tank
- System Pressure: 44 Psi
- Terminal Type: Threaded
- Terminal Gender: Male
- Average Flow Rating: 26
- Strainer Included: No
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
15101-61B03, 15110-61B00, 15110-61BT0, 152-0822, 152-0919, 1520922, 17040-SD4-000, 17040-SH5-A30, 17040-SK7-A70, 17040-SL0-A30, 17040-SL0-A31, 17040-SL0-L30, 17040-SL5-A30, 17040-SM4-A30, 17040-SP0-A30, 17040-SS0-A30, 17040-SS0-V30, 17708-SE0-935...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Fuel Delivery Type | CID |
|---|---|---|---|---|---|---|---|
| 1985 - Toyota Pickup | L | 2366 | In-Tank | GAS | 4 Cyl 2.4L | FI | - |
Showing 1 - 7 of 7 products
Loading...