Image
Product
Price
- Fuel Pump Module Assembly
- with Plastic Tank with 18 Gallon Tank RPO Code NE2 with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector ; Updated design with Check Valve. Can be used to replace fuel pump modules built with or without check valve To be used only when failed fuel module cover contains a 3-pin black pressure sensor Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 7
- Voltage: 12.0
- Maximum Pressure: 109.0
- Fuel Type: Gas
- Pump Type: Electric
- Resistance Ohms Full: 250.0
- Outlet Outside Diameter: 0.375
- Terminal Quantity: 4
- Outlet Quantity: 3
- Internal Or External Strainer: Internal
- Resistance Ohms Empty: 40.0
- System Pressure: 62 Psi
- Terminal Type: Blade
- Fuel Level Sender Assembly Included: Yes
- Vapor Pressure Sensor: Yes
- Terminal Gender: Male
- Lock Ring Included: No
- Regulator Included: No
- Strainer Included: Yes
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
19179591, 19331274, 25314928, 25347147, 67378, 67555, 953-5125, 9535125, A30026, AFS0481S, C5341006, DFG0287, E3992M, M212887, MU1100, MU1733, MU1763, P74834M...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Chevrolet Blazer | V | - | 4 | 6 Cyl 4.3L | 262 |
- Fuel Pump Module Assembly
- with Turbine Pump Technology with 18 Gallon Tank ; Includes Tank Seal, Connectors, and Wire Harness
- Product Attributes:
- Fuel Filter Included: No
- Connector Gender: Female
- Voltage: 12v
- Negative Ground: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- Wiring Harness Length: 445.0
- Connector Shape: Oval
- Fuel Tank Pressure Sensor Included: No
- Minimum Pressure: 60.0
- Resistance Ohms Empty: 40.0
- Lock Ring Included: No
- Top Mount Diameter: 94.0
- Wire Quantity: 4
- Pump Type: Electric
- Resistance Ohms Full: 250.0
- Wire Harness Included: Yes
- Fuel Sending Unit Included: Yes
- Outlet Outside Diameter: 9.49
- Terminal Quantity: 4
- Internal Or External Strainer: External
- Connector Color: White
- Terminal Type: Spade
- Terminal Gender: Male
- Regulator Included: No
- Outlet Fitting Thread Size: 3/8
- Strainer Included: Yes
- The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
This Part Fits the Following OEM/Substitute Numbers:
150019, 19177220, 19179591, 19331269, 19331274, 237711, 25176789, 25314067, 25344818, 25347147, 2630305, 2920054, 402-P3992M, 530-2320, 953-0021, 953-5125, A30026, AFS0481S...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Chevrolet Blazer | V | - | 4 | 6 Cyl 4.3L | 262 |
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1998 - Chevrolet Blazer | LT |
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1998 - Chevrolet Blazer | LT |
- Except Low Lubricity Sender
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- POM and PBT materials are used to create a strong, durable, and ESD-compatible product with 100% new material and no regrind
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
This Part Fits the Following OEM/Substitute Numbers:
, 00310339, 4010192, E3992M, FG0052, MO349, P74827M, P74834M, P74837M, SP6085M
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Chevrolet Blazer | V | - | 4 | 6 Cyl 4.3L | 262 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 1998 - Chevrolet Blazer | 2 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Plastic Fuel Tank
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1998 - Chevrolet Blazer | LT |
- With steel fuel tank Without low lubricity fuel sender
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- POM and PBT materials are used to create a strong, durable, and ESD-compatible product with 100% new material and no regrind
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
This Part Fits the Following OEM/Substitute Numbers:
00310318, 4010111, E3953M, FG0071, MO128, SP459M
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Chevrolet Blazer | V | - | 4 | 6 Cyl 4.3L | 262 |
- With Module Code SGK
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- POM and PBT materials are used to create a strong, durable, and ESD-compatible product with 100% new material and no regrind
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
This Part Fits the Following OEM/Substitute Numbers:
00310319, 4010132, E3954M, FG0072, MO133, SP414M
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Chevrolet Blazer | V | - | 2 | 6 Cyl 4.3L | 262 |
Showing 1 - 9 of 9 products
Loading...