1998 Ford E 350 Econoline Fuel Injection Pump Timer Parts

Choose your Engine for your 1998 Ford E-350 Econoline


Showing 1 - 1 of 1 products
Image
SKU
Product
Rating
Price

BD Diesel
  • Includes CDT2 Control Module/CDT2 Wiring Harness/Cable Tie/Posi-Tap Connectors/Ring Connector
  • Cool Down Timer Kit V2.0; Includes CDT2 Control Module/CDT2 Wiring Harness/Cable Tie/Posi-Tap Connectors/Ring Connector;
  • Cool Down Timer Kit V2.0
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • Prevent Turbo Damage During Hot Engine Shutdown
    • EGT Time And Manual Controlled Shutdown
    • Works With Any K-Type EGT Probe
    • Compatible With Most OEM Vehicle Security Alarms
  • Turbochargers operate at high temperatures. The Cool Down Timer is designed to keep the engine running when the ignition is turned off to prevent turbocharger bearing failure that could occur when the engine is shut down, stopping the cool lubricating oil flowing to the turbocharger while it is still hot. If the oil flow is shut off too early, the remaining oil in the bearing housing will overheat causing coking of the bearings which causes both premature bearing wear and reduced oiling of the bearings. Allowing the engine to idle to a minimum operating speed gives the turbocharger time to cool down. The CDT is adjustable for up to 5 minutes of idle time, or optionally works with any K-Type EGT probe for temperature-based shutdown.

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Ford E-350 Econoline V - 8 Cyl 7.3L 445
Showing 1 - 1 of 1 products

Loading...