Image
Product
Price
- Metal Shield
- Includes Red Air Filter/Metal Heat Shield/Tubing/Adaptors/Hardware;CARB E.O. D-803-1
- APEX Series Metal Shield Air Intake with DryTech 3D Dry Filter
- Shielded Box Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Replacement Filter: 5160
-
Features:
- Up To 11 Horsepower And 11 ft. lbs. Torque
- Flows 26 Percent Better Than Factory Intake System 5.0 in. of H2O
- Improves Throttle Response And Amplifies Engine Sound
- Each DryTech Filter is System Matched For Maximum Gains
- Features CORSAs DryTech 3D Reusable No Oil Low-Maint. Filter
- 50K Between Maintenance Intervals Depending on Driving Conditions
- Durable Matte Black Wrinkle Coat Finish
- No Tune Required
- Detailed Printed Instructions Includes Full-Color Available Online
- All hardware included
- Made in the U.S.A.
- Lifetime Warranty
- CORSA Performance APEX Series Intake Systems offer a free-flowing high performance alternative to your restrictive stock intake. Featuring Dynamic Flow Technology (DFT), APEX series intakes unlock performance gains from your engine. By carefully analyzing and understanding the air path to the engine and engine operation under a range of driving conditions, CORSA Performance engineers designed and created air ducts to maximize air delivery. Each air intake is constructed to maximize flow velocity, air volume and density by utilizing precise cross-sectional areas that remove restrictions, unleashing horsepower and torque. This APEX Series intake is system-matched with an oversized DryTech 3D synthetic media air filter to maximize air flow and reduce maintenance intervals. APEX Series intakes are finished to enhance the appearance of any engine bay utilizing a durable black wrinkle coat that will stand up to a lifetime of use. CORSA Performance APEX intake systems install quickly (most under 30 minutes) and come complete with step by step installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Cadillac Escalade |
- Metal Shield
- Includes Blue Air Filter/Metal Heat Shield/Tubing/Adaptors/Hardware;CARB E.O. D-803-1
- APEX Series Metal Shield Air Intake with MaxFlow 5 Oiled Filter Oiled Filter
- Shielded Box Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Replacement Filter: 5161
-
Features:
- Up To 11 Horsepower And 18 ft. lbs. Torque
- Flows 26 Percent Better Than Factory Intake System 5.0 in. of H2O
- Improves Throttle Response And Amplifies Engine Sound
- Each MaxFlow Filter Is System Matched For Maximum Gains
- Features CORSAs DryTech 3D Reusable No Oil Low-Maint. Filter
- Holds Up To 20 Percent More Dirt than Similar Cone Shaped Filters
- Durable Matte Black Wrinkle Coat Finish
- No Tune Required
- Detailed Printed Instructions Includes Full-Color Available Online
- All hardware included
- Made in the U.S.A.
- Lifetime Warranty
- CORSA Performance APEX Series Intake Systems offer a free-flowing high performance alternative to your restrictive stock intake. Featuring Dynamic Flow Technology (DFT), APEX series intakes unlock performance gains from your engine. By carefully analyzing and understanding the air path to the engine and engine operation under a range of driving conditions, CORSA Performance engineers designed and created air ducts to maximize air delivery. Each air intake is constructed to maximize flow velocity, air volume and density by utilizing precise cross-sectional areas that remove restrictions, unleashing horsepower and torque. Every APEX Series intake is system-matched with an oversized air filter to maximize air flow and reduce maintenance intervals. APEX Series intakes are finished to enhance the appearance of any engine bay utilizing a durable black wrinkle coat that will stand up to a lifetime of use. CORSA Performance APEX intake systems install quickly (most under 30 minutes) and come complete with step by step installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Cadillac Escalade |
- Metal Shield
- Includes Blue Air Filter/Metal Heat Shield/Tubing/Adaptors/Hardware;CARB E.O. D-803-1
- APEX Series Metal Shield Air Intake with MaxFlow 5 Oiled Filter Oiled Filter
- Shielded Box Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Replacement Filter: 5161
-
Features:
- Up To 11 Horsepower And 18 ft. lbs. Torque
- Flows 26 Percent Better Than Factory Intake System 5.0 in. of H2O
- Improves Throttle Response And Amplifies Engine Sound
- Each MaxFlow Filter Is System Matched For Maximum Gains
- Features CORSAs DryTech 3D Reusable No Oil Low-Maint. Filter
- Holds Up To 20 Percent More Dirt than Similar Cone Shaped Filters
- Durable Matte Black Wrinkle Coat Finish
- No Tune Required
- Detailed Printed Instructions Includes Full-Color Available Online
- All hardware included
- Made in the U.S.A.
- Lifetime Warranty
- CORSA Performance APEX Series Intake Systems offer a free-flowing high performance alternative to your restrictive stock intake. Featuring Dynamic Flow Technology (DFT), APEX series intakes unlock performance gains from your engine. By carefully analyzing and understanding the air path to the engine and engine operation under a range of driving conditions, CORSA Performance engineers designed and created air ducts to maximize air delivery. Each air intake is constructed to maximize flow velocity, air volume and density by utilizing precise cross-sectional areas that remove restrictions, unleashing horsepower and torque. Every APEX Series intake is system-matched with an oversized air filter to maximize air flow and reduce maintenance intervals. APEX Series intakes are finished to enhance the appearance of any engine bay utilizing a durable black wrinkle coat that will stand up to a lifetime of use. CORSA Performance APEX intake systems install quickly (most under 30 minutes) and come complete with step by step installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Cadillac Escalade |
- Metal Shield
- Includes Red Air Filter/Metal Heat Shield/Tubing/Adaptors/Hardware;CARB E.O. D-803-1
- APEX Series Metal Shield Air Intake with DryTech 3D Dry Filter
- Shielded Box Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Replacement Filter: 5160
-
Features:
- Up To 11 Horsepower And 11 ft. lbs. Torque
- Flows 26 Percent Better Than Factory Intake System 5.0 in. of H2O
- Improves Throttle Response And Amplifies Engine Sound
- Each DryTech Filter is System Matched For Maximum Gains
- Features CORSAs DryTech 3D Reusable No Oil Low-Maint. Filter
- 50K Between Maintenance Intervals Depending on Driving Conditions
- Durable Matte Black Wrinkle Coat Finish
- No Tune Required
- Detailed Printed Instructions Includes Full-Color Available Online
- All hardware included
- Made in the U.S.A.
- Lifetime Warranty
- CORSA Performance APEX Series Intake Systems offer a free-flowing high performance alternative to your restrictive stock intake. Featuring Dynamic Flow Technology (DFT), APEX series intakes unlock performance gains from your engine. By carefully analyzing and understanding the air path to the engine and engine operation under a range of driving conditions, CORSA Performance engineers designed and created air ducts to maximize air delivery. Each air intake is constructed to maximize flow velocity, air volume and density by utilizing precise cross-sectional areas that remove restrictions, unleashing horsepower and torque. This APEX Series intake is system-matched with an oversized DryTech 3D synthetic media air filter to maximize air flow and reduce maintenance intervals. APEX Series intakes are finished to enhance the appearance of any engine bay utilizing a durable black wrinkle coat that will stand up to a lifetime of use. CORSA Performance APEX intake systems install quickly (most under 30 minutes) and come complete with step by step installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Cadillac Escalade |
- Performance Air Intake System
- Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 10.18 HP At 4996 RPM;CARB E.O. D-269-61
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 7.500 In. (191mm)
- Clamp Style: Regular
- Coupler Color: Not Applicable
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.18 Hp @ 4996 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1041
- Item Weight: 13.200 Lbs. (6 Kg)
- RPM: 4996
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 6.000 In. (152mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 5
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Bright Aluminized Metal
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 7.500 In. (191mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 32.000 In. (813mm)
- Air Filter Element Washable: Yes
- Couplers Included: No
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 32.000 In. (813mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1041
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your Escalade, Sierra 1500, Silverado 1500, Suburban, Tahoe, Yukon, and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2015 - Cadillac Escalade | V | 6162 | FLEX | 8 Cyl 6.2L | Luxury | 376 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing/Hardware;CARB E.O. D-269-61
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 57i Series Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 7.500 In. (191mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- TUV Approved (Europe): No
- Replacement Filter: Ru-1041
- Item Weight: 13.200 Lbs. (6 Kg)
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1041
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Replaces The Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- Lasts Up To 100 000 Miles Before Service Required
- Easy To Install - Usually in 90 Minutes or Less
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Cadillac Escalade | V | 6162 | FLEX | 8 Cyl 6.2L | 376 |
- EVOLUTION Cold Air Intake System
- Includes Tubing/Filter/Enclosed Air Box w/Housing And ClearVue Sight Window/Plenum/Hardware; HP Gains +13.0 HP/Torque Gains +16.0 ft./lbs.;CARB Pending
- EVOLUTION Cold Air Intake System, Part No. EVO7103, 2014-2019 GM Truck V8-5.3L/6.2L, 2015-2020 GM SUV V8-5.3L/6.2L.
- Evolution Series Air Induction System
- Product Attributes:
- Tube Material: Rotomolded Xlpe
- Grade Type: Performance
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium; Nickel; Carbon Black & Cobalt; Which Are Known To The State Of California To Cause Cancer.
- Filter Media: Supernano-web Dry
- Intake Color: Black
- TQ Gain: 16
- Heat Shield Included: No
- Black Hydroshield (Optional): 1074blk
- Filter Color: Blue
- Replacement Filter Part Number: X-1101-bb
- Compatible Throttle Controller: Pt0021b
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 13
-
Features:
- Dyno Proven gains of up to 13 hp and 16 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded Polyethylene housing and intake tube
- Injen Clear-View badge for simple air filter inspection
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1101-BB
- Optional hydroshield part number 1074BLK
- Stainless steel band clamps with inner protective liner
- Aggressive under hood appearance while maintaining an OE fit
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO7103 cold air intake system. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your GM Truck/SUV. After hours of designing and dyno testing, Injen is proud to say that the EVO7103 Evolution Air Intake system puts down numbers of up to 13 additional horsepower and 16 Ft.-lbs. of torque.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Cadillac Escalade |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing/Hardware;CARB E.O. D-269-61 California Emission~57 Series - High Density Polyethylene Tube w/Heat Shield
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 57i Series Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 7.500 In. (191mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- TUV Approved (Europe): No
- Replacement Filter: Ru-1041
- Item Weight: 13.200 Lbs. (6 Kg)
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1041
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Replaces The Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- Lasts Up To 100 000 Miles Before Service Required
- Easy To Install - Usually in 90 Minutes or Less
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Cadillac Escalade | V | 6162 | FLEX | 8 Cyl 6.2L | 376 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.3 HP At 5338 RPM;CARB E.O. D-269-61
- K/N Blackhawk Induction cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Blackhawk Air Induction Kit
- Product Attributes:
- Oil Included: No Filter Oil Required
- Air Filter Height: 7.500 In. (191mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 8.3 Hp @ 5338 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-3101hbk
- Item Weight: 13.200 Lbs. (6 Kg)
- RPM: 5338
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Non-woven Synthetic
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 6
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Textured Black
- Clamp Color: Black
- Clamp Material: Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 8 Hp
- Intake Pipe Inlet Length: 26.000 In. (660mm)
- Air Filter Element Washable: Yes
- Couplers Included: 3
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 26.000 In. (660mm)
- Filter Color: Black
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Air Filter
- Made From All Black Components
- Lasts Up To 100 000 Miles Before Service
- Easy To Install
- Million Mile Limited Warranty
- K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your Escalade, Sierra 1500, Silverado 1500, Suburban, Tahoe, Yukon, and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable Dryflow Synthetic Air Filter. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2015 - Cadillac Escalade | V | 6162 | FLEX | 8 Cyl 6.2L | Luxury | 376 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.3 HP At 5338 RPM;CARB E.O. D-269-61 71 Series Blackhawk - Metal Intake Kit For Truck or SUV; Black
- K/N Blackhawk Induction cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Blackhawk Air Induction Kit
- Product Attributes:
- Oil Included: No Filter Oil Required
- Air Filter Height: 7.500 In. (191mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 8.3 Hp @ 5338 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-3101hbk
- Item Weight: 13.200 Lbs. (6 Kg)
- RPM: 5338
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Non-woven Synthetic
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 6
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Textured Black
- Clamp Color: Black
- Clamp Material: Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 8 Hp
- Intake Pipe Inlet Length: 26.000 In. (660mm)
- Air Filter Element Washable: Yes
- Couplers Included: 3
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 26.000 In. (660mm)
- Filter Color: Black
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Air Filter
- Made From All Black Components
- Lasts Up To 100 000 Miles Before Service
- Easy To Install
- Million Mile Limited Warranty
- K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your Escalade, Sierra 1500, Silverado 1500, Suburban, Tahoe, Yukon, and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable Dryflow Synthetic Air Filter. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2015 - Cadillac Escalade | V | 6162 | FLEX | 8 Cyl 6.2L | Luxury | 376 |
Showing 1 - 10 of 13 products
Loading...