2016 Ford Mustang Air Intake Kit Parts
Choose your Submodel for your 2016 Ford Mustang
Image
Product
Price
- EVOLUTION Cold Air Intake System
- Includes Roto-Molded Housing W/Boost Plenum And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +23 HP/Torque Gains +33 ft./lbs. ;Not Legal For Sale Or Use In California
- EVOLUTION Cold Air Intake System, Part No. EVO9204, 2015-2017 Ford Mustang GT V8-5.0L.
- Evolution Series Air Induction System
- Product Attributes:
- Tube Material: Rotomolded Xlpe
- Grade Type: Performance
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium; Nickel; Carbon Black And Cobalt; Which Are Known To The State Of California To Cause Cancer.
- Filter Media: Supernano-web Dry
- Intake Color: Black
- TQ Gain: 33
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1130-bb
- Compatible Throttle Controller: Pt0013b
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 23
-
Features:
- Dyno Proven gains of up to 23 hp and 33 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Fully functioning
- forward facing ram air scoop
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1130-BB
- Stainless steel band clamps with inner protective liner
- Aggressive underHood appearance while maintaining an OE fit
- Made in Pomona, California USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Durable Rotomolded intake tube: The EVO9204 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. This tube utilizes our patented MR Technology for accurate fuel trims for safe power improvements and no check engine lights. SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO9204 cold air intake system. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford Mustang GT. After hours of designing and dyno testing, Injen is proud to say that the EVO9204 Evolution Air Intake system puts down numbers of up to 23 additional horsepower and 33 Ft.-lbs. of torque.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | GT Premium | 302 |
- EVOLUTION Cold Air Intake System
- Includes Roto-Molded Housing W/Boost Plenum And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +21 HP/Torque Gains +21 ft./lbs. ;Not Legal For Sale Or Use In California
- EVOLUTION Cold Air Intake System, Part No. EVO9203, 2015-2019 Ford Mustang L4-2.3L Turbo.
- Evolution Series Air Induction System
- Product Attributes:
- Tube Material: Rotomolded Xlpe
- Grade Type: Performance
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium; Nickel; Carbon Black And Cobalt; Which Are Known To The State Of California To Cause Cancer.
- Filter Media: Supernano-web Dry
- Intake Color: Black
- TQ Gain: 21
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1130-bb
- Compatible Throttle Controller: Pt0013b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 24
-
Features:
- Dyno Proven gains of up to 15 hp and 16 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Fully functioning
- forward facing ram air scoop
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1130-BB
- Stainless steel band clamps with inner protective liner
- Aggressive underHood appearance while maintaining an OE fit
- Made in Pomona, California USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Durable Rotomolded intake tube: The EVO9203 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. This tube utilizes our patented MR Technology for accurate fuel trims for safe power improvements and no check engine lights. SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO9203 cold air intake system. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford Mustang Ecoboost. After hours of designing and dyno testing, Injen is proud to say that the EVO9203 Evolution Air Intake system puts down numbers of up to 21 additional horsepower and 21 Ft.-lbs. of torque.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | L | 2300 | 4 Cyl 2.3L | EcoBoost | 140 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Polished Tubing; Estimated Horsepower Gain 19.25 HP At 5287 RPM;Not Legal For Sale Or Use In California
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.000 In. (127mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 19.25 Hp @ 5287 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-2960
- Item Weight: 12.600 Lbs. (5.7 Kg)
- RPM: 5287
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Product Box Length: 24.100 In. (612mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Horse Power Increase: 19 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | GT Premium | 302 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 15.72 HP At 4224 RPM;CARB E.O. D-269-63
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 57i Series Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 15.72 Hp @ 4224 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-2960
- Item Weight: 12.900 Lbs. (5.8 Kg)
- RPM: 4224
- Product Box Height: 10.500 In. (267mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 13.250 In. (337mm)
- Product Box Length: 35.500 In. (902mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Horse Power Increase: 16 Hp
- Air Filter Element Washable: Yes
- Package Material: Corrugated
- Couplers Included: 2
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Replaces The Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- Lasts Up To 100 000 Miles Before Service Required
- Easy To Install - Usually in 90 Minutes or Less
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
This Part Fits the Following OEM/Substitute Numbers:
632589
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | L | 2300 | 4 Cyl 2.3L | EcoBoost Premium | 140 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 7.49 HP At 5401 RPM;CARB E.O. D-269-65
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 57i Series Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 7.49 Hp @ 5401 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-2960
- Item Weight: 12.200 Lbs. (5.5 Kg)
- RPM: 5401
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Horse Power Increase: 7 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Replaces The Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- Lasts Up To 100 000 Miles Before Service Required
- Easy To Install - Usually in 90 Minutes or Less
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | V | 3726 | 6 Cyl 3.7L | V6 | 227 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 15.72 HP At 4224 RPM;Off-Road Use Only
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 15.72 Hp @ 4224 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Replacement Filter: Ru-2960
- Item Weight: 12.900 Lbs. (5.8 Kg)
- RPM: 4224
- Product Box Height: 10.500 In. (267mm)
- Product Box Width: 13.250 In. (337mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Package Material: Paperboard
- Product Box Length: 35.500 In. (902mm)
- Clamp Quantity: 5
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
This Part Fits the Following OEM/Substitute Numbers:
572589
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | L | 2300 | 4 Cyl 2.3L | EcoBoost Premium | 140 |
- Performance Air Intake System
- Includes Red Air Filter/Heat Shield; Textured Black Tubing; Estimated Horsepower Gain 12.42 HP At 5186 RPM;CARB E.O. D-269-65
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Complete Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.000 In. (127mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.42 Hp @ 5186 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-2960
- Item Weight: 12.400 Lbs. (5.6 Kg)
- RPM: 5186
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 24.100 In. (612mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Textured Black
- Clamp Color: Natural
- Clamp Material: Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Intake Pipe Inlet Length: 17.000 In. (432mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.250 In. (83mm)
- Intake Pipe Outlet Length: 17.000 In. (432mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.250 In. (83mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | V | 3726 | 6 Cyl 3.7L | V6 | 227 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Textured Black Tubing; Estimated Horsepower Gain 18.12 HP At 6400 RPM;Not Legal For Sale Or Use In California
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 18.12 Hp @ 6400 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Rp-2960
- Item Weight: 12.000 Lbs. (5.4 Kg)
- RPM: 6400
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Product Box Length: 24.100 In. (612mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Black
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Horse Power Increase: 18 Hp
- Air Filter Element Washable: Yes
- Package Material: Corrugated
- Couplers Included: 2
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
This Part Fits the Following OEM/Substitute Numbers:
632590, LRS9600
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | V | 5163 | 8 Cyl 5.2L | Shelby GT350R | 315 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 18.68 HP At 5216 RPM;Not Legal For Sale Or Use In California
- K/N Blackhawk Induction cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Blackhawk Air Induction Kit
- Product Attributes:
- Oil Included: No Filter Oil Required
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 18.68 Hp @ 5216 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-3106hbk
- Item Weight: 12.000 Lbs. (5.4 Kg)
- RPM: 5216
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Non-woven Synthetic
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Black
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Carbon Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Horse Power Increase: 19 Hp
- Air Filter Element Washable: Yes
- Package Material: Paperboard
- Couplers Included: 2
- Filter Color: Black
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Air Filter
- Made From All Black Components
- Lasts Up To 100 000 Miles Before Service
- Easy To Install
- Million Mile Limited Warranty
- Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | GT Premium | 302 |
- Performance Air Intake System
- Includes Red Air Filter/Heat Shield; Textured Black Tubing; Estimated Horsepower Gain 12.42 HP At 5186 RPM;CARB E.O. D-269-65 69 Series - Metal Intake Kit For Sport Compact & Sports Car; Black [CA]
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Complete Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.000 In. (127mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.42 Hp @ 5186 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-2960
- Item Weight: 12.400 Lbs. (5.6 Kg)
- RPM: 5186
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 24.100 In. (612mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Textured Black
- Clamp Color: Natural
- Clamp Material: Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Intake Pipe Inlet Length: 17.000 In. (432mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.250 In. (83mm)
- Intake Pipe Outlet Length: 17.000 In. (432mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.250 In. (83mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Mustang | V | 3726 | 6 Cyl 3.7L | V6 | 227 |
Showing 1 - 10 of 13 products
Loading...