Image
Product
Price
- Metal Shield
- Includes Red Air Filter/Metal Heat Shield/Tubing/Adaptors/Hardware;CARB E.O. D-803-2
- APEX Series Metal Shield Air Intake with DryTech 3D Dry Filter
- Shielded Box Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Estimated Up To 15 Horsepower And 18 ft. lbs. Torque
- Flows 26 Percent Better Than Factory Intake System 5.0 in. of H2O
- Improves Throttle Response And Amplifies Engine Sound
- Each DryTech Filter is System Matched For Maximum Gains
- Features CORSAs DryTech 3D Reusable No Oil Low-Maint. Filter
- 50K Between Maintenance Intervals Depending on Driving Conditions
- Durable Matte Black Wrinkle Coat Finish
- No Tune Required
- Detailed Printed Instructions Includes Full-Color Available Online
- All hardware included
- Made in the U.S.A.
- Lifetime Warranty
- CORSA Performance APEX Series Intake Systems offer a free-flowing high performance alternative to your restrictive stock intake. Featuring Dynamic Flow Technology (DFT), APEX series intakes unlock performance gains from your engine. By carefully analyzing and understanding the air path to the engine and engine operation under a range of driving conditions, CORSA Performance engineers designed and created air ducts to maximize air delivery. Each air intake is constructed to maximize flow velocity, air volume and density by utilizing precise cross-sectional areas that remove restrictions, unleashing horsepower and torque. This APEX Series intake is system-matched with an oversized DryTech 3D synthetic media air filter to maximize air flow and reduce maintenance intervals. APEX Series intakes are finished to enhance the appearance of any engine bay utilizing a durable black wrinkle coat that will stand up to a lifetime of use. CORSA Performance APEX intake systems install quickly (most under 30 minutes) and come complete with step by step installation instructions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | Summit | 345 |
- Metal Shield
- Includes Red Air Filter/Metal Heat Shield/Tubing/Adaptors/Hardware;CARB E.O. D-803-2
- APEX Series Metal Shield Air Intake with DryTech 3D Dry Filter
- Shielded Box Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Estimated Up To 15 Horsepower And 18 ft. lbs. Torque
- Flows 26 Percent Better Than Factory Intake System 5.0 in. of H2O
- Improves Throttle Response And Amplifies Engine Sound
- Each DryTech Filter is System Matched For Maximum Gains
- Features CORSAs DryTech 3D Reusable No Oil Low-Maint. Filter
- 50K Between Maintenance Intervals Depending on Driving Conditions
- Durable Matte Black Wrinkle Coat Finish
- No Tune Required
- Detailed Printed Instructions Includes Full-Color Available Online
- All hardware included
- Made in the U.S.A.
- Lifetime Warranty
- CORSA Performance APEX Series Intake Systems offer a free-flowing high performance alternative to your restrictive stock intake. Featuring Dynamic Flow Technology (DFT), APEX series intakes unlock performance gains from your engine. By carefully analyzing and understanding the air path to the engine and engine operation under a range of driving conditions, CORSA Performance engineers designed and created air ducts to maximize air delivery. Each air intake is constructed to maximize flow velocity, air volume and density by utilizing precise cross-sectional areas that remove restrictions, unleashing horsepower and torque. This APEX Series intake is system-matched with an oversized DryTech 3D synthetic media air filter to maximize air flow and reduce maintenance intervals. APEX Series intakes are finished to enhance the appearance of any engine bay utilizing a durable black wrinkle coat that will stand up to a lifetime of use. CORSA Performance APEX intake systems install quickly (most under 30 minutes) and come complete with step by step installation instructions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | Summit | 345 |
- Momentum GT PRO 5R Cold Air Intake System
- Includes Pre-Oiled Air Filter/Sealed Housing w/Air Scoop and Sight Window/Roto-Molded Intake Tube/Hardware; +35 HP/+31 lbs/ft. Torque;CARB E.O. D-550-27
- Momentum GT PRO 5R Cold Air Intake System Jeep Grand Cherokee SRT-8/SRT (WK2) 12-18 V8-6.4L HEMI
- Momentum GT Pro 5R Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- High Quality 1-Pc. Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
- Built-In Sight Window Provides Easy Inspection Of Filter
- Pro DRY S OilFree 3-Layer Progressively Finer Porosity Syn. Media
- Unique Filter-To-Housing Interface For Easy Installation
- No Cutting Or Drilling On Factory Parts For Faster Installation
- Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4" x 4-3/4") oval flange and is 9" tall with an inverted top. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | 6424 | 8 Cyl 6.4L | SRT | 392 |
- Momentum GT PRO DRY S Cold Air Intake System
- Includes Oil-Free Air Filter/Sealed Housing w/Air Scoop and Sight Window/Roto-Molded Intake Tube/Hardware; +35 HP/+31 lbs/ft. Torque;CARB E.O. D-550-27
- Momentum GT PRO DRY S Cold Air Intake System Jeep Grand Cherokee SRT-8/SRT (WK2) 12-18 V8-6.4L HEMI
- Momentum GT Pro Dry S Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- +35 HP / + 31 ft./lbs. Torque Max Gains
- Outflows Factory Intake By 31%
- High Quality 1-Piece Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
- Built In Sight Window Provides Easy Inspection Of Filter
- Washable/Reusable Air Filter For Max. Performance
- Unique Filter-To-Housing Interface For Easy Installation
- No Cutting Or Drilling On OEM Parts
- Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4" x 4-3/4") oval flange and is 9" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | 6424 | 8 Cyl 6.4L | SRT | 392 |
- Momentum GT PRO 5R Cold Air Intake System
- Includes Pre-Oiled Air Filter/Sealed Housing w/Auxiliary Air Scoop/Molded Intake Tube/Built-In Sight Window; +16 HP/+24 lbs. x ft. Torque;Not Legal For Sale Or Use In California Not Legal For Sale Or Use On Vehicles Registered In California
- Momentum GT PRO 5R Cold Air Intake System Jeep Grand Cherokee (WK2) 11-18 V8-5.7L HEMI
- Momentum GT Pro 5R Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Outflows Factory Intake By 42%
- CAD Designed Roto-Molded Intake Tube
- High Quality 1-Piece Sealed Housing w/Aux. Air Scoop
- 5-Layer Progressive Cotton Gauze Media
- Unique Filter-To-Housing Interface For Easy Servicing
- Built In Sight Window Provides Easy Inspection Of Filter
- No Cutting Or Drilling On Factory Parts For Easy Installation
- Unique One-Piece Housing with Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 8" tall 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | Limited | 345 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.49 HP At 6000 RPM;CARB E.O. D-269-107
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 77 Series Air Intake System
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.49 Hp @ 6000 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-1042
- Item Weight: 11.000 Lbs. (5 Kg)
- RPM: 6000
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 4
- Intake Pipe Color: Silver
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Horse Power Increase: 11 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tubing
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- Easy To Install - Usually in 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | 3604 | 6 Cyl 3.6L | 75th Anniversary | 220 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 17 HP At 4944 RPM;Not Legal For Sale Or Use In California
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 7.500 In. (191mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 17 Hp @ 4944 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-1041
- Item Weight: 10.700 Lbs. (4.9 Kg)
- RPM: 4944
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 5
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 17 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1041
- Package Type: Box
- Air Box Included: No
- Street Legal: No
- Intake Pipe Outlet Width: 6.000 In. (152mm)
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | Summit | 345 |
- Momentum GT PRO DRY S Cold Air Intake System
- Includes Oil-Free Air Filter/Sealed Housing w/Auxiliary Air Scoop/Molded Intake Tube/Built-In Sight Window; +16 HP/+24 lbs. x ft. Torque;Not Legal For Sale Or Use In California Not Legal For Sale Or Use On Vehicles Registered In California
- Momentum GT PRO DRY S Cold Air Intake System Jeep Grand Cherokee (WK2) 11-18 V8-5.7L HEMI
- Momentum GT Pro Dry S Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Outflows Factory Intake By Up To 34%
- CAD-Designed Roto-Molded Intake Tube
- High Quality 1-Piece Sealed Housing w/Aux. Air Scoop
- Pro DRY S Oil-Free 3 Layer Synthetic Media
- Unique Housing To Filter Interface-Patent Pending
- Built In Sight Window Provides Easy Inspection Of Filter
- No Cutting Or Drilling On Factory Parts For Faster Installation
- Unique One-Piece Housing with Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 3-Layer Performance Air Filter: The Momentum GT is designed around an oil-free, large 8" tall 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | Overland | 345 |
- Performance Air Intake System
- Includes Red Air Filter/Heat Shield/Black and Silver Tubing/Hardware; Replaces Factory System; Estimated Horsepower Gain 12.67HP At 2900RPM;CARB E.O. D-269-72
- K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K/N s famous million mile limited warranty.
- 57 Series Fuel Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.67 Hp @ 2900 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-2960
- Item Weight: 13.200 Lbs. (6 Kg)
- RPM: 2900
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Clamp Quantity: 9
- Intake Pipe Color: Black And Silver
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Polyethylene And Aluminum
- Horse Power Increase: 13 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 4
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Aluminum Tube With High Quality Black Finish
- Washable And Reusable Lifetime Air Filter
- Lasts Up To 100 000 Miles Before Service Required
- Easy To Install - Usually in 90 Minutes or Less
- Low Restriction Aluminum Tubing
- K&N Million Mile Limited Warranty
- The K&N 57-1570 FIPK air intake system replaces the restrictive factory air filter, air intake housing and intercooler pipe on specific Jeep Grand Cherokee Turbo Diesel models. K&N air intake systems are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly and turbo intercooler pipe. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through an aerodynamically engineered intake tube into the engine's turbo inlet for a guaranteed power gain. The 57-1570 air intake system comes with a K&N high-flow air filter and a heat shield that installs into the original air box space. The intake tube accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a flat blade screwdriver, a ratchet set, a 4mm allen, and several wrenches.
This Part Fits the Following OEM/Substitute Numbers:
755074
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | 2987 | 6 Cyl 3.0L | Summit | 182 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 17 HP At 4944 RPM;CARB E.O. D-269-107
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 17 Hp @ 4944 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-1041
- Item Weight: 10.700 Lbs. (4.9 Kg)
- RPM: 4944
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Horse Power Increase: 17 Hp
- Air Filter Element Washable: Yes
- Package Material: Paperboard
- Couplers Included: 2
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1041
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | Summit | 345 |
Showing 1 - 10 of 13 products
Loading...