2019 Ford Expedition Air Intake Kit Parts
Image
Product
Price
- Injen EVOLUTION Cold Air Intake System
- Includes Roto-Molded Housing-Ram Air Scoop And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +14 HP/Torque Gains +15 ft./lbs. ;Not Legal For Sale Or Use In California
- EVOLUTION Cold Air Intake System, Part No. EVO9104, 2017-2023 Ford F-150 V6-3.5L EcoBoost, 2017-2023 Ford F-150 Raptor V6-3.5L EcoBoost, 2018-2023 Ford Expedition V6-3.5L EcoBoost, 2018-2023 Lincoln Navigator V6-3.5L EcoBoost.
- Evolution Series Air Induction System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium; Nickel; Carbon Black And Cobalt; Which Are Known To The State Of California To Cause Cancer.
- Compatible Throttle Controller: Pt0013b
- Prop 65 (C, R or CR): Cr
-
Features:
- Does NOT fit hybrid models
- Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque
- Designed to work with the stock calibration
- Clear-Vue Window Provides Easy Inspection of Filter Without Disassembly
- Unique and Patented Twist Lock Filter-to-Housing attachment for Easy Installation
- Aggressive intake growl under acceleration
- Durable XLPE Crosslinked Roto-Molded Polyethylene housing and scoop
- Intake scoop is designed to capture the largest amount of cool air
- Fully serviceable Injen SuperNano-Web dry air filter
- Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9104C
- Replacement air filter part number X-1116-BB
- Stainless steel band clamps with inner protective liner
- Aggressive under hood appearance while maintaining an OE fit
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford F-150/F-150 Raptor. After hours of designing and dyno testing, Injen is proud to say that the EVO9104 Evolution Air Intake system puts down numbers of up to 19 additional horsepower and 21 Ft.-lbs. of torque.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Ford Expedition |
- EVOLUTION Cold Air Intake System
- Includes Durable Roto-Molded Housing-Ram Air Scoop And Intake Tube/SuperNano-Web Dry Filter; HP Gains +14 HP/Torque Gains +15 ft./lbs. ;Not Legal For Sale Or Use In California
- EVOLUTION Cold Air Intake System, Part No. EVO9107, 2015-2023 Ford F-150 V6-2.7L(tt)/V6-3.5(tt) EcoBoost, 2017-2023 Ford F-150 Raptor V6-3.5L(tt) EcoBoost, 2018-2023 Expedidtion/Navigator V6-3.5L(tt) EcoBoost
- Evolution Series Air Induction System
- Product Attributes:
- Tube Material: Rotomolded Xlpe
- Grade Type: Performance
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium; Nickel; Carbon Black And Cobalt; Which Are Known To The State Of California To Cause Cancer.
- Filter Media: Supernano-web Dry
- Intake Color: Black
- TQ Gain: 15
- Heat Shield Included: No
- Black Hydroshield (Optional): N/a
- Filter Color: Blue
- Replacement Filter Part Number: X-1125-bb
- Compatible Throttle Controller: Pt0013b
- Red Hydroshield (Optional): N/a
- Prop 65 (C, R or CR): Cr
- HP Gain: 14
-
Features:
- Dyno Proven gains of up to 14 hp and 15 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded Polyethylene housing and scoop
- Intake scoop is designed to capture the largest amount of cool air
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1125-BB
- Optional hydroshield part number 1073BLK
- Stainless steel band clamps with inner protective liner
- Aggressive under hood appearance while maintaining an OE fit
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford F-150/F-150 Raptor. After hours of designing and dyno testing, Injen is proud to say that the EVO9107 Evolution Air Intake system puts down numbers of up to 14 additional horsepower and 15 Ft.-lbs. of torque.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Ford Expedition |
- Performance Air Intake System
- Includes Air Filter/Adaptor/Tubing/Hardware; Estimated Horsepower Gain 12.3 At 4915 RPM;Off-Road Use Only 63 Series - Off-Road Use
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.3 Hp @ 4915 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-5173
- Item Weight: 10.000 Lbs. (4.5 Kg)
- RPM: 4915
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 7
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Horse Power Increase: 12 Hp
- Air Filter Element Washable: Yes
- Package Material: Corrugated
- Couplers Included: 3
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
This Part Fits the Following OEM/Substitute Numbers:
632592, 755081
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- Performance Air Intake System
- Includes Air Filter/Adaptor/Tubing/Hardware; Estimated Horsepower Gain 12.3 At 4915 RPM;Off-Road Use Only
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.3 Hp @ 4915 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-5173
- Item Weight: 10.000 Lbs. (4.5 Kg)
- RPM: 4915
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 7
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Horse Power Increase: 12 Hp
- Air Filter Element Washable: Yes
- Package Material: Corrugated
- Couplers Included: 3
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Ford Expedition |
- Not Flanged; Red Air Filter; Natural Stainless Steel Clamp; Estimated Horsepower Gain 8.7 HP At 4505 RPM;CARB E.O. D-269-70
- A 50-state legal; simple and cost-effective direct replacement filter and intake tube combination guaranteed to increase horsepower and torque.
- Performance Air Intake System
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 8.7 Hp @ 4505 Rpm
- TUV Approved (Europe): No
- Replacement Filter: 33-2385
- Item Weight: 5.800 Lbs. (2.6 Kg)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Not Flanged
- Clamp Quantity: 6
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Horse Power Increase: 9 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 3
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower And Torque
- Mandrel-Bent Aluminum Intake Tube Paired
- Oversized Oiled Cotton Air Filter
- Engineered To Provide High Airflow And Exceptional Filtration
- Replaces Factory Air Filter And Intake Tube
- 10-Year/Million Mile Limited Warranty
- 57-series OEM air box intake systems include a washable, reusable High-Flow Air Filter paired with a CAD-designed high airflow intake tube, and is designed to be a simple, cost-effective performance upgrade. The included oiled cotton filter is a direct replacement for your factory filter, drops easily into the factory air box, can go up to 100,000 miles between filter services under normal highway driving conditions, and offers K&N's industry-leading engine protection. Each 57-series OEM air box intake system is designed for specific vehicle applications to ensure a precise fit, and can typically be installed in less than 60 minutes with only standard hand tools. Buy with confidence under the K&N No-Hassle Lifetime Limited Warranty. Legal in all 50 States.
This Part Fits the Following OEM/Substitute Numbers:
755122
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Ford Expedition |
Showing 1 - 5 of 5 products
Loading...