2020 Jeep Gladiator Air Intake Kit Parts

Choose your Submodel for your 2020 Jeep Gladiator


Showing 1 - 10 of 12 products
Image
SKU
Product
Rating
Price

Injen
  • EVOLUTION Cold Air Intake System
  • Includes Durable Roto-Molded Polyethylene Tube And Housing/Oiled Air Filter; Gains +11 HP/TQ Gains +11 ft./lbs.;Not Legal For Sale Or Use In California
  • EVOLUTION Cold Air Intake System, Part No. EVO5005C, 2018-2021 Jeep Wrangler JL V6-3.6L, 2020-2021 Jeep Gladiator JT V6-3.6L,.
  • Evolution Series Air Induction System
  • Product Attributes:
    • Tube Material: Rotomolded Xlpe
    • Grade Type: Performance
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium Nickel Carbon Black And Cobalt Which Are Known To The State Of California To Cause Cancer.
    • Filter Media: 8-layer Oiled Cotton Gauze
    • Intake Color: Black
    • TQ Gain: 11
    • Heat Shield Included: No
    • Black Hydroshield (Optional): 1077blk
    • Filter Color: Red
    • Replacement Filter Part Number: X-1108-br
    • Compatible Throttle Controller: Pt0010b
    • Red Hydroshield (Optional): N/a
    • Prop 65 (C, R or CR): Cr
    • HP Gain: 11
  • Features:
    • Does not fit on eTorque models
    • One of a kind modular system that adapts our snorkel (sold separately - EVO15168)
    • Dyno Proven gains of up to 11 hp and 11 lb-ft. of torque
    • Designed to work with the stock calibration
    • Aggressive intake growl under acceleration
    • Durable Roto-Molded Polyethylene housing and intake tube
    • Reinforced automotive grade silicone couplers
    • Fully serviceable Injen SuperNano-Web dry air filter
    • Replacement air filter part number X-1108-BR
    • Optional Air Filter Cleaning Kit also Available - X-1030
    • Stainless steel band clamps with inner protective liner
    • Aggressive under hood appearance while maintaining an OE fit
    • Made in Pomona California, USA
    • Injen Technology Limited Lifetime Warranty
    • CARB EO# D-476-10
    • CARB EO# D-476-10 only applies to 2018-2019 model year Wranglers
    • CARB EO# D-476-10 Does not apply to 2020 model years or the Gladiator
  • The Evolution of cold air intakes is here for your 2018-2021 Jeep Wrangler JL and the 2020-2021 Jeep Gladiator JT - both with the 3.6L V6 engine. The Evolution cold air intake system by Injen Technology is the next generation performance intake system for your Jeep Wrangler JL. The EVO5005C continues our effort to have a fully modular intake system for the Jeep Wrangler. Keeping this modular concept from our popular JK series, you can easily adapt our intake to with our fully-functional snorkel system ? part number EVO15168 (sold separately). This is a one-of-a-kind kit that is absolutely the best choice on the market for your Jeep Wrangler. Every EVO5005C cold air intake is made in the USA from cross linked high density polyethylene for extreme durability and long-lasting looks. This kit include stainless steel hardware and automotive grade urethane couplers for a quick and robust installation. Speaking of the installation, the process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the 8-Layer oiled cotton gauze air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO5005C housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO5005C Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2020 - Jeep Gladiator V 3604 6 Cyl 3.6L Rubicon 220

Injen
  • EVOLUTION Cold Air Intake System
  • Includes Durable Roto-Molded Polyethylene Tube And Housing/SuperNano-Web Dry Filter; Gains +11 HP/TQ Gains +11 ft./lbs.;Not Legal For Sale Or Use In California
  • EVOLUTION Cold Air Intake System, Part No. EVO5005, 2018-2021 Jeep Wrangler JL V6-3.6L, 2020-2021 Jeep Gladiator JT V6-3.6L,.
  • Evolution Series Air Induction System
  • Product Attributes:
    • Tube Material: Rotomolded Xlpe
    • Grade Type: Performance
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium Nickel Carbon Black And Cobalt Which Are Known To The State Of California To Cause Cancer.
    • Filter Media: Supernano-web Dry
    • Intake Color: Black
    • TQ Gain: 11
    • Heat Shield Included: No
    • Black Hydroshield (Optional): 1077blk
    • Filter Color: Blue
    • Replacement Filter Part Number: X-1108-bb
    • Compatible Throttle Controller: Pt0010b
    • Red Hydroshield (Optional): N/a
    • Prop 65 (C, R or CR): Cr
    • HP Gain: 11
  • Features:
    • Does not fit on eTorque Models
    • One of a kind modular system that adapts our snorkel (sold separately - EVO15168)
    • Dyno Proven gains of up to 11 hp and 11 lb-ft. of torque
    • Designed to work with the stock calibration
    • Aggressive intake growl under acceleration
    • Durable Roto-Molded Polyethylene housing and intake tube
    • Reinforced automotive grade silicone couplers
    • Fully serviceable Injen SuperNano-Web dry air filter
    • Replacement air filter part number X-1108-BB
    • Stainless steel band clamps with inner protective liner
    • Aggressive under hood appearance while maintaining an OE fit
    • Made in Pomona California, USA
    • Injen Technology Limited Lifetime Warranty
    • CARB EO# D-476-10
    • CARB EO# D-476-10 only applies to 2018-2019 model year Wranglers
    • CARB EO# D-476-10 Does not apply to 2020 model years or the Gladiator
  • SuperNano-Web Dry Air Filter; The Injen SuperNano-Web Dry air filter is included with the EVO5005 cold air intake. This filter is uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter available for this application, which enhances the air volume - resulting in increased power gains while making this installation process quick and easy. , , Quality Hardware; From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation; Keep it simple! Every Injen Evolution Cold Air intake that uses our Twist-Lock System has been strategically designed to utilize fewer parts and tools to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven; Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO5005 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 11 additional horsepower and 11 Lbs-Ft.of torque, Injen is proud to say that the EVO5005 Evolution Cold Air Intake system is the very best intake system for your Jeep Wrangler JL that money can buy.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2020 - Jeep Gladiator V 3604 6 Cyl 3.6L Launch Edition 220

Mishimoto
  • Jeep Wrangler JL Snorkel, 2018+, Micro-Wrinkle Red
  • Borne Off-Road Snorkel for 2018+ Jeep Wrangler JL
  • Product Attributes:
    • SellingPoint04: Increases Induction Noise
    • SellingPoint05: Precision Engineered Rotational-molded Tube Is Durable And Uv Resistant
    • SellingPoint06: Includes Durable 2.5mm-thick Steel Brackets
    • SellingPoint07: Designed Using The Latest In 3d Printing, Cad Modeling, And Flow Bench Technology
    • SellingPoint01: Fits 2018+ Jeep Wrangler Jl
    • SellingPoint02: Raises Fresh Air Inlet To Roof Level To Capture Cool And Clean Air On The Trail
    • SellingPoint03: Fits With Stock Or Mishimoto Intake
    • TechSpec Air Filter Part Number: N/a
    • TechSpec Chassis Codes: Jl--jt
    • SellingPoint08: Snorkel Inlet Features Drains To Help Prevent Water Intrusion
    • SellingPoint09: Removable Inlet Allows Use With Pre-filters
    • SellingPoint10: Slotted Bracket Accepts Additional Lighting
    • TechSpec Note: Does Not Fit Vehicles Equipped With 3.0l Diesel Engine.----cutting Of The Hood Is Required To Fit This Snorkel.----the Gray Primer Color Is Intended As A Protective Coating Only And Should Be Removed Or Properly Prepped For Further Customization Such As P
    • SellingPoint15: N/a
    • TechSpec Filter Diameter: N/a
    • Install Difficulty: 4
    • SellingPoint11: Available With Black, Blue, Red, Or Gray Primer Brackets And Inlet Screen To Match Any Build
    • SellingPoint12:
      • Mishimoto Lifetime Warranty
      • Patent Pending
    • TechSpec Engine Codes: 2.0l--3.6l
    • SellingPoint13: Mishimoto Lifetime Warranty
    • SellingPoint14: N/a
    • TechSpec Caution: This Snorkel Alone Does Not Increase The Vehicle's Water Fording Limit. Fording Water Above The Stock Recommended Limit May Require Modifying Other Components To Avoid Water Damage.
    • TechSpec Applications: 2018+ Jeep Wrangler Jl 2.0l--2018+ Jeep Wrangler Jl 3.6l----2020+ Jeep Gladiator Jt 3.6l
    • TechSpec Includes: (1) Borne Off-road Snorkel Tube--(1) Borne Off-road Snorkel Inlet--(1) Inlet Screen--(1) Hood Bezel--(1) Intake Duct--(4) Mounting Brackets--(1) Worm Gear Clamp--(1) T-bolt Clamp--(1) Cut Guide--mounting Hardware--mishimoto Lifetime Warranty
  • Features:
    • Fits 2018+ Jeep Wrangler JL
    • Raises fresh air inlet to roof level to capture cool and clean air on the trail
    • Fits with stock or Mishimoto intake
    • Increases induction noise
    • Precision-engineered rotational-molded tube is durable and UV resistant
    • Includes durable 2.5mm-thick steel brackets
    • Designed using the latest in 3D printing, CAD modeling, and flow bench technology
    • Snorkel inlet features drains to help prevent water intrusion
    • Removable inlet allows use with pre-filters
    • Slotted bracket accepts additional lighting
    • Available with black, blue, red, or gray primer brackets and inlet screen to match any build
    • Mishimoto Lifetime Warranty
  • Raised intakes, or snorkels, are one of the best modifications you can do for your 2018+ Jeep Wrangler JL if you plan to spend a lot of time off-road.As anybody who’s ever driven on a trail knows, dust and debris are a fact of life off-road. The JL intake has a fresh air duct that pulls outside air from the passenger fender area. But when the vehicle in front of you is kicking up dust, or you’re fording three feet of water, that air isn’t very fresh. Heavy dust often stays low to the ground, about where the stock fresh air inlet lives, but Borne Off-Road has a solution to get fresh air into your intake.This Borne Off-Road 2018+ Jeep Wrangler JL Snorkel moves the fresh air inlet over 20 inches above the stock location, allowing the engine to pull in cleaner air. Our precision rotational-molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. The top of our snorkel includes a 6-inch inlet with a steel mesh cover to protect the intake from large debris. This inlet can also be swapped for a pre-filter to help keep your main intake filter clean.Our snorkel mounts to the JL’s body with sturdy 2.5mm-thick steel brackets and mates directly to the stock lower airbox, making it perfect for use with the Mishimoto JL intake. The brackets and inlet screen are powder coated for maximum durability and are available in micro-wrinkle black, micro-wrinkle blue, or micro-wrinkle red. We also offer the brackets and screen in a gray primer that can be easily customized to suit any build. Like all Mishimoto and Borne Off-Road Wrangler products, this 2018+ Jeep Wrangler JL Snorkel is backed by our Mishimoto Lifetime Warranty.

Additional Fitment Information:
Vehicle
2020 - Jeep Gladiator

Mishimoto
  • Jeep Wrangler JL Snorkel, 2018+, Micro-Wrinkle Red
  • Borne Off-Road Snorkel for 2018+ Jeep Wrangler JL
  • Product Attributes:
    • SellingPoint04: Increases Induction Noise
    • SellingPoint05: Precision Engineered Rotational-molded Tube Is Durable And Uv Resistant
    • SellingPoint06: Includes Durable 2.5mm-thick Steel Brackets
    • SellingPoint07: Designed Using The Latest In 3d Printing, Cad Modeling, And Flow Bench Technology
    • SellingPoint01: Fits 2018+ Jeep Wrangler Jl
    • SellingPoint02: Raises Fresh Air Inlet To Roof Level To Capture Cool And Clean Air On The Trail
    • SellingPoint03: Fits With Stock Or Mishimoto Intake
    • TechSpec Air Filter Part Number: N/a
    • TechSpec Chassis Codes: Jl--jt
    • SellingPoint08: Snorkel Inlet Features Drains To Help Prevent Water Intrusion
    • SellingPoint09: Removable Inlet Allows Use With Pre-filters
    • SellingPoint10: Slotted Bracket Accepts Additional Lighting
    • TechSpec Note: Does Not Fit Vehicles Equipped With 3.0l Diesel Engine.----cutting Of The Hood Is Required To Fit This Snorkel.----the Gray Primer Color Is Intended As A Protective Coating Only And Should Be Removed Or Properly Prepped For Further Customization Such As P
    • SellingPoint15: N/a
    • TechSpec Filter Diameter: N/a
    • Install Difficulty: 4
    • SellingPoint11: Available With Black, Blue, Red, Or Gray Primer Brackets And Inlet Screen To Match Any Build
    • SellingPoint12:
      • Mishimoto Lifetime Warranty
      • Patent Pending
    • TechSpec Engine Codes: 2.0l--3.6l
    • SellingPoint13: Mishimoto Lifetime Warranty
    • SellingPoint14: N/a
    • TechSpec Caution: This Snorkel Alone Does Not Increase The Vehicle's Water Fording Limit. Fording Water Above The Stock Recommended Limit May Require Modifying Other Components To Avoid Water Damage.
    • TechSpec Applications: 2018+ Jeep Wrangler Jl 2.0l--2018+ Jeep Wrangler Jl 3.6l----2020+ Jeep Gladiator Jt 3.6l
    • TechSpec Includes: (1) Borne Off-road Snorkel Tube--(1) Borne Off-road Snorkel Inlet--(1) Inlet Screen--(1) Hood Bezel--(1) Intake Duct--(4) Mounting Brackets--(1) Worm Gear Clamp--(1) T-bolt Clamp--(1) Cut Guide--mounting Hardware--mishimoto Lifetime Warranty
  • Features:
    • Fits 2018+ Jeep Wrangler JL
    • Raises fresh air inlet to roof level to capture cool and clean air on the trail
    • Fits with stock or Mishimoto intake
    • Increases induction noise
    • Precision-engineered rotational-molded tube is durable and UV resistant
    • Includes durable 2.5mm-thick steel brackets
    • Designed using the latest in 3D printing, CAD modeling, and flow bench technology
    • Snorkel inlet features drains to help prevent water intrusion
    • Removable inlet allows use with pre-filters
    • Slotted bracket accepts additional lighting
    • Available with black, blue, red, or gray primer brackets and inlet screen to match any build
    • Mishimoto Lifetime Warranty
  • Raised intakes, or snorkels, are one of the best modifications you can do for your 2018+ Jeep Wrangler JL if you plan to spend a lot of time off-road.As anybody who’s ever driven on a trail knows, dust and debris are a fact of life off-road. The JL intake has a fresh air duct that pulls outside air from the passenger fender area. But when the vehicle in front of you is kicking up dust, or you’re fording three feet of water, that air isn’t very fresh. Heavy dust often stays low to the ground, about where the stock fresh air inlet lives, but Borne Off-Road has a solution to get fresh air into your intake.This Borne Off-Road 2018+ Jeep Wrangler JL Snorkel moves the fresh air inlet over 20 inches above the stock location, allowing the engine to pull in cleaner air. Our precision rotational-molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. The top of our snorkel includes a 6-inch inlet with a steel mesh cover to protect the intake from large debris. This inlet can also be swapped for a pre-filter to help keep your main intake filter clean.Our snorkel mounts to the JL’s body with sturdy 2.5mm-thick steel brackets and mates directly to the stock lower airbox, making it perfect for use with the Mishimoto JL intake. The brackets and inlet screen are powder coated for maximum durability and are available in micro-wrinkle black, micro-wrinkle blue, or micro-wrinkle red. We also offer the brackets and screen in a gray primer that can be easily customized to suit any build. Like all Mishimoto and Borne Off-Road Wrangler products, this 2018+ Jeep Wrangler JL Snorkel is backed by our Mishimoto Lifetime Warranty.

Additional Fitment Information:
Vehicle Sub Model
2020 - Jeep Gladiator Sport S

K&N
  • Performance Air Intake System
  • Includes Air Filter/Heat Shield/Polished Tubing/Hardware; Estimated Horsepower Gain 8.8 HP At 5400 RPM;Not Legal For Sale Or Use In California 77 Series - Metal Intake Kit For Truck or SUV; Polished
  • K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
  • 77 Series Air Intake System
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Clamp Style: Worm Gear
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 8.8 Hp @ 5400 Rpm
    • California Restricted: Not Legal For Sale Or Use In California
    • TUV Approved (Europe): No
    • Replacement Filter: Ru-2815
    • Item Weight: 10.400 Lbs. (4.7 Kg)
    • RPM: 5400
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Clamp Quantity: 5
    • Intake Pipe Color: Polished
    • Clamp Color: Natural
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Clamp Material: Stainless Steel
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Aluminum
    • Horse Power Increase: 9 Hp
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Corrugated
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: No
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Free Flowing Aluminum Tubing
    • Replaces Entire Factory Air Intake System
    • Lasts Up To 100 000 Miles Before Service Required
    • Easy To Install - Usually in 90 Minutes or Less
    • Washable And Reusable Lifetime Air Filter
    • K&N Million Mile Limited Warranty
  • Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2020 - Jeep Gladiator V 3604 6 Cyl 3.6L Launch Edition 220

K&N
  • Performance Air Intake System
  • Includes Air Filter/Heat Shield/Polished Tubing/Hardware; Estimated Horsepower Gain 8.8 HP At 5400 RPM;CARB E.O. D-269-107 77 Series - Metal Intake Kit For Truck or SUV; Polished
  • K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
  • 77 Series Air Intake System
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Clamp Style: Worm Gear
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 8.8 Hp @ 5400 Rpm
    • California Restricted: Not Legal For Sale Or Use In California
    • TUV Approved (Europe): No
    • Replacement Filter: Ru-2815
    • Item Weight: 10.400 Lbs. (4.7 Kg)
    • RPM: 5400
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Clamp Quantity: 5
    • Intake Pipe Color: Polished
    • Clamp Color: Natural
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Clamp Material: Stainless Steel
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Aluminum
    • Horse Power Increase: 9 Hp
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Corrugated
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: No
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Free Flowing Aluminum Tubing
    • Replaces Entire Factory Air Intake System
    • Lasts Up To 100 000 Miles Before Service Required
    • Easy To Install - Usually in 90 Minutes or Less
    • Washable And Reusable Lifetime Air Filter
    • K&N Million Mile Limited Warranty
  • Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

This Part Fits the Following OEM/Substitute Numbers:
INJEVO5003

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2020 - Jeep Gladiator V 3604 6 Cyl 3.6L Launch Edition 220

K&N
  • Performance Air Intake System
  • Includes Air Filter/Heat Shield/Polished Tubing/Hardware; Estimated Horsepower Gain 8.8 HP At 5400 RPM;CARB E.O. D-269-111
  • K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
  • 77 Series Air Intake System
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Clamp Style: Worm Gear
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 8.8 Hp @ 5400 Rpm
    • California Restricted: Not Legal For Sale Or Use In California
    • TUV Approved (Europe): No
    • Replacement Filter: Ru-2815
    • Item Weight: 10.400 Lbs. (4.7 Kg)
    • RPM: 5400
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Clamp Quantity: 5
    • Intake Pipe Color: Polished
    • Clamp Color: Natural
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Clamp Material: Stainless Steel
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Aluminum
    • Horse Power Increase: 9 Hp
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Corrugated
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: No
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Free Flowing Aluminum Tubing
    • Replaces Entire Factory Air Intake System
    • Lasts Up To 100 000 Miles Before Service Required
    • Easy To Install - Usually in 90 Minutes or Less
    • Washable And Reusable Lifetime Air Filter
    • K&N Million Mile Limited Warranty
  • Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2020 - Jeep Gladiator V 3604 6 Cyl 3.6L Launch Edition 220

Rough Country
  • w/o Pre-Filter;Not Legal For Sale Or Use In California
  • Cold Air Intake; w/o Pre-Filter;
  • Cold Air Intake
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Increases Horsepower And Performance
    • Improves Airflow To Engine For Better Combustion
    • Includes Reusable Air Filter
    • Easy Installation
    • High Quality Construction
  • Gain increased horsepower and throttle response while protecting your engine from harmful particles and debris with Rough Countrys Cold Air Intake System. This intake system moves the air filter away from the stuffy engine compartment so cooler air can be circulated into the engine for an increase in power. Cooler air is denser, and brings more oxygen into the combustion chamber to help your vehicle perform at its greatest potential. The cylindrical design and large diameter tube allow Rough Countrys Cold Air Intake System to provide far better airflow than the factory air filter enclosed in a box.Each unit includes a premium, reusable air filter thats easy to clean for a long life of great performance. This easy to install device goes on in a snap for an instant increase in performance. Includes a Limited Lifetime Warranty.

Additional Fitment Information:
Vehicle
2020 - Jeep Gladiator

Rough Country
  • w/Pre-Filter;Not Legal For Sale Or Use In California
  • Cold Air Intake; w/Pre-Filter;
  • Cold Air Intake
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Increases Horsepower And Performance
    • Improves Airflow To Engine For Better Combustion
    • Includes Reusable Air Filter
    • Easy Installation
    • High Quality Construction
  • Gain increased horsepower and throttle response while protecting your engine from harmful particles and debris with Rough Countrys Cold Air Intake System. This intake system moves the air filter away from the stuffy engine compartment so cooler air can be circulated into the engine for an increase in power. Cooler air is denser, and brings more oxygen into the combustion chamber to help your vehicle perform at its greatest potential. The cylindrical design and large diameter tube allow Rough Countrys Cold Air Intake System to provide far better airflow than the factory air filter enclosed in a box.Each unit includes a premium, reusable air filter thats easy to clean for a long life of great performance. This easy to install device goes on in a snap for an instant increase in performance. Includes a Limited Lifetime Warranty.

Additional Fitment Information:
Vehicle
2020 - Jeep Gladiator

K&N
  • Performance Air Intake System
  • Includes Air Filter/Heat Shield/Intake Tube; Estimated Horsepower Gain 9.1 HP At 5400 RPM;Not Legal For Sale Or Use In California 71 Series Blackhawk - Metal Intake Kit For Truck or SUV; Black
  • K/N Blackhawk Induction cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
  • Blackhawk Air Induction Kit
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Clamp Style: Worm Gear
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 9.1 Hp @ 5400 Rpm
    • California Restricted: Not Legal For Sale Or Use In California
    • TUV Approved (Europe): No
    • Replacement Filter: Ru-3107hbk
    • Item Weight: 10.400 Lbs. (4.7 Kg)
    • RPM: 5400
    • Filter Material: Non-woven Synthetic
    • Air Filter Outlet Shape: Round
    • Clamp Quantity: 5
    • Intake Pipe Color: Textured Black
    • Clamp Color: Natural
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Clamp Material: Stainless Steel
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Aluminum
    • Horse Power Increase: 9 Hp
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Corrugated
    • Filter Color: Black
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: No
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response/Engine Sound
    • Washable And Reusable Air Filter
    • Made From All Black Components
    • Filter Lasts Up To 100000 Miles Before Service Is Requires
    • Easy To Install - Usually 90 Minutes or Less
    • K&N Million Mile Limited Warranty
  • Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

This Part Fits the Following OEM/Substitute Numbers:
INJEVO5003

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2020 - Jeep Gladiator V 3604 6 Cyl 3.6L Launch Edition 220
Showing 1 - 10 of 12 products

Loading...