2011 Ford F 150 Engine Coolant Reservoir Parts
Choose your Submodel for your 2011 Ford F-150
Image
Product
Price
- Ford F-150 Aluminum Expansion Tank, 2011-2014
- Aluminum Expansion Tank, fits Ford F-150 2011-2014
- Product Attributes:
- SellingPoint04: 100-percent Aluminum, Fully-welded Construction For Maximum Durability During Repeated Temperature Transitions
- SellingPoint05: Sight Tube Allows For Fast And Easy Assessment Of Coolant Level
- SellingPoint06: Internal Baffles Keep Coolant Near Overflow Port During Aggressive Driving, Preventing Air Entry Into Coolant System
- SellingPoint07: Available Natural Finish Makes Customization Easy Through Powder-coating, Anodizing, Or Hydro-dipping
- SellingPoint01: Fits All 2011-2014 Ford F-150s (except 6.2l Raptor)
- SellingPoint02: Included Cnc-machined Coupler And Silicone Hose Eliminate The Stock Leak-prone Quick-disconnect
- SellingPoint03: 33-percent Increase In Capacity Over Stock Tank
- TechSpec Chassis Codes: N/a
- SellingPoint08: Fits With Stock Expansion Tank Cap
- SellingPoint09: Available In Micro-wrinkle Black Powder-coat Or Natural Finish
- OptionLabel: Natural
- SellingPoint10: Patent Numberd892,971
- TechSpec Note: 1cutting Of The Stock Lower Airbox Is Required To Remove The Stock Expansion Tank From The Airbox. Please See The Included Note Card Or For Cut Instructions.----if You Need To Purchase A New Expansion Tank/lower Airbox Assembly, The Ford Part Number Is Bl
- TechSpec Installation Notes: 22 In-lbs (2.5nm) Recommended For All Worm-gear Clamps. These Clamps Have An Operating Range Of 18-27 In- 2-3nm. Do Not Exceed The Maximum Torque Rating Of 27 In-lbs (3nm).
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Material: 6061 Aluminum
- TechSpec Applications: 2011-2014 Ford F-150 W/ 3.5l Ecoboost V6--2011-2014 Ford F-150 W/ 3.7l V6--2011-2014 Ford F-150 W/ 5.0l V8----2015-2017 Ford Expedition W/ 3.5l Ecoboost V6----2015-2017 Lincoln Navigator W/ 3.5l Ecoboost V6
- TechSpec Includes: (1) Aluminum Expansion Tank W/ Sight Tube--(1) Silicone Coolant Hose W/ Pre-installed Cnc-machined Aluminum Coupler--(2) Worm Gear Clamps--(2) Mounting Brackets W/ Hardware--mishimoto Lifetime Warranty
- TechSpec Width (in): N/a
- TechSpec Fluid Capacity (gal): 1.5
-
Features:
- Fits all 2011-2014 Ford F-150s
- Included CNC-machined coupler and silicone hose eliminate the stock leak-prone quick-disconnect
- 33-percent increase in capacity over stock tank
- Available natural finish makes customization easy
- Mishimoto Lifetime Warranty
- Anyone who's ever worked on an aging vehicle knows how brittle plastic pieces in the engine bay become. But, the stock 2011-2014 F-150 expansion tank probably won't last long enough for you to have to worry aging plastic. If you're like many 2011-2014 F-150 owners, you've already replaced your expansion tank a few times due to a leaking quick-disconnect fitting on the bottom of the tank. Mishimoto's solution? Start by making the tank out of stronger and more durable aluminum, then get rid of the quick disconnect completely. Included with this Mishimoto expansion tank is a CNC-machined coupler and silicone hose. With minimal modification to the stock hose, this kit lets you remove the leak-prone quick-disconnect fitting and clamp on a reliable and lifetime-guaranteed silicone hose. The Mishimoto 2011-2014 Ford F-150 expansion tank is available in either micro-wrinkle black or a natural finish, for easy customization through powder-coating, anodizing, or hydro-dipping. Our expansion tank also utilizes an easy to read sight tube to make checking the coolant level quick and easy. No more trying to shine a light through that yellowed plastic tank. Of course, our Lifetime Warranty ensures that you never have to worry about seeing an ugly, leaking, plastic expansion tank on your 2011-2014 Ford F-150 ever again.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ford F-150 | V | 4951 | 8 Cyl 5.0L | 302 |
- Ford F-150 Aluminum Expansion Tank, 2011-2014
- Aluminum Expansion Tank, fits Ford F-150 2011-2014
- Product Attributes:
- SellingPoint04: 100-percent Aluminum, Fully-welded Construction For Maximum Durability During Repeated Temperature Transitions
- SellingPoint05: Sight Tube Allows For Fast And Easy Assessment Of Coolant Level
- SellingPoint06: Internal Baffles Keep Coolant Near Overflow Port During Aggressive Driving, Preventing Air Entry Into Coolant System
- SellingPoint07: Available Natural Finish Makes Customization Easy Through Powder-coating, Anodizing, Or Hydro-dipping
- SellingPoint01: Fits All 2011-2014 Ford F-150s (except 6.2l Raptor)
- SellingPoint02: Included Cnc-machined Coupler And Silicone Hose Eliminate The Stock Leak-prone Quick-disconnect
- SellingPoint03: 33-percent Increase In Capacity Over Stock Tank
- TechSpec Chassis Codes: N/a
- SellingPoint08: Fits With Stock Expansion Tank Cap
- SellingPoint09: Available In Micro-wrinkle Black Powder-coat Or Natural Finish
- OptionLabel: Natural
- SellingPoint10: Patent Numberd892,971
- TechSpec Note: 1cutting Of The Stock Lower Airbox Is Required To Remove The Stock Expansion Tank From The Airbox. Please See The Included Note Card Or For Cut Instructions.----if You Need To Purchase A New Expansion Tank/lower Airbox Assembly, The Ford Part Number Is Bl
- TechSpec Installation Notes: 22 In-lbs (2.5nm) Recommended For All Worm-gear Clamps. These Clamps Have An Operating Range Of 18-27 In- 2-3nm. Do Not Exceed The Maximum Torque Rating Of 27 In-lbs (3nm).
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- TechSpec Material: 6061 Aluminum
- TechSpec Applications: 2011-2014 Ford F-150 W/ 3.5l Ecoboost V6--2011-2014 Ford F-150 W/ 3.7l V6--2011-2014 Ford F-150 W/ 5.0l V8----2015-2017 Ford Expedition W/ 3.5l Ecoboost V6----2015-2017 Lincoln Navigator W/ 3.5l Ecoboost V6
- TechSpec Includes: (1) Aluminum Expansion Tank W/ Sight Tube--(1) Silicone Coolant Hose W/ Pre-installed Cnc-machined Aluminum Coupler--(2) Worm Gear Clamps--(2) Mounting Brackets W/ Hardware--mishimoto Lifetime Warranty
- TechSpec Width (in): N/a
- TechSpec Fluid Capacity (gal): 1.5
-
Features:
- Fits all 2011-2014 Ford F-150s
- Included CNC-machined coupler and silicone hose eliminate the stock leak-prone quick-disconnect
- 33-percent increase in capacity over stock tank
- Available natural finish makes customization easy
- Mishimoto Lifetime Warranty
- Anyone who's ever worked on an aging vehicle knows how brittle plastic pieces in the engine bay become. But, the stock 2011-2014 F-150 expansion tank probably won't last long enough for you to have to worry aging plastic. If you're like many 2011-2014 F-150 owners, you've already replaced your expansion tank a few times due to a leaking quick-disconnect fitting on the bottom of the tank. Mishimoto's solution? Start by making the tank out of stronger and more durable aluminum, then get rid of the quick disconnect completely. Included with this Mishimoto expansion tank is a CNC-machined coupler and silicone hose. With minimal modification to the stock hose, this kit lets you remove the leak-prone quick-disconnect fitting and clamp on a reliable and lifetime-guaranteed silicone hose. The Mishimoto 2011-2014 Ford F-150 expansion tank is available in either micro-wrinkle black or a natural finish, for easy customization through powder-coating, anodizing, or hydro-dipping. Our expansion tank also utilizes an easy to read sight tube to make checking the coolant level quick and easy. No more trying to shine a light through that yellowed plastic tank. Of course, our Lifetime Warranty ensures that you never have to worry about seeing an ugly, leaking, plastic expansion tank on your 2011-2014 Ford F-150 ever again.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Ford F-150 | XL |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford F-150 |
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford F-150 |
Showing 1 - 4 of 4 products
Loading...