1998 Ford F 250 Trailer Hitch Parts
Choose your Engine for your 1998 Ford F-250
Image
Product
Price
- Class 4 Hitch; 2in. Receiver; Select Ford F-150; F-250; F-350; F-450 Super Duty
- 10000lbs. Gross Trailer Weight; 1000lbs. Tongue Weight; 12000lbs. Weight Distributing; 1200lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 14355 Class 4 Trailer Hitch; 2-Inch Receiver; Fits Select Ford F-150; F-250; F-350; F-450 Super Duty
- Class IV 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 10000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 10000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1200
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 1000
- Weight Distribution: 12000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever the next item is on your to-do list -- whether its arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset -- CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Ford F150, F150 Heritage, F250, F250 Super Duty, F350 Super Duty and F450 Super Duty (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2 in. receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid Bonderite and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Ford F-250 | V | - | Rear | 8 Cyl 5.4L | 330 |
- Sqr Tube 2" Recvr 3500 LB Wt Cap/350 LB Tong 4K Wt Dist Cap/400 LB Tong
- 2 Inch Receiver; 3500 Pound Weight Carrying Capacity/ 350 Pound Tongue Weight; Square Tube; Trailer hitch weight ratings are limited to vehicle manufacturer''s stated capacities; 4000 Pound Weight Distributing Capacity/ 400 Pound Tongue Weight; Class III;
- Class III Square Tube 2 Inch Receiver 3500 Pound Weight Carrying Capacity/ 350 Pound Tongue Weight 4000 Pound Weight Distributing Capacity/ 400 Pound Tongue Weight
- Trailer Hitch Rear
- Product Attributes:
- Weight Distributing Capacity (LB): 4000 Pound
- Weight Carrying Tongue Weight (LB): 350 Pound
- Color/ Finish: Black
- Construction: Square Tube
- Weight Distributing Tongue Weight (LB): 400 Pound
- Title: Husky Towing Square Class Iii
- Class: Iii
- Weight Carrying Capacity (LB): 3500 Pound
-
Features:
- Limited 1 Year Warranty
- Husky Towing Products offers innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Ford F-250 |
- Class III Trailer Hitch
- 2 in. Receiver; 500/5000 lbs. Weight Carrying [Tongue Weight/Gross Trailer Weight] 800/8000 lbs. When Used With A Weight Distribution Kit~ Install Time Is 30 Minutes
- Max-Frame Receiver
- Max-Frame Class III Trailer Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
-
Features:
- Max-Frame Class III Trailer Hitch
- 2" Square Receiver Tube Opening . Max-Frame receivers are designed for trucks, vans and sport utility vehicles . Neat Appearance, All Frame Attachments . A-Coat Base with Black Powder Coat Finish . Rated up to 5,000 lbs. (GTW) Weight Carrying (WC). Rated up to 8,000 lbs. (GTW) Weight Distributing (WD) . Solid All-Welded Construction for Maximum Strength and Safety . Custom Built According to Manufacturer & Model Year . Ensures Perfect Fit and Top Towing Performance . Computer-Aided Design and Fatigue Stress Testing . Designed to Withstand Road Abuse Within Specified Capacities . Backed by a Nationwide Limited Lifetime Warranty
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Ford F-250 | Rear |
- Class IV Trailer Hitch
- 2 in. Receiver; 900/6000 lbs. Weight Carrying [Tongue Weight/Gross Trailer Weight] 1000/10000 lbs. When Used With A Weight Distribution Kit~ Install Time Is 20 Minutes
- Round Tube Max-Frame Receiver
- Round Tube Max-Frame Class IV Trailer Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
-
Features:
- Round Tube Max-Frame Class IV Trailer Hitch
- 2" Square Receiver Tube Opening . Max-Frame receivers are designed for trucks, vans and sport utility vehicles . Neat Appearance, All Frame Attachments . A-Coat Base with Black Powder Coat Finish . Rated up to 6,000 lbs. (GTW) Weight Carrying (WC). Rated up to 10,000 lbs. (GTW) Weight Distributing (WD) . Solid All-Welded Construction for Maximum Strength and Safety . Custom Built According to Manufacturer & Model Year . Ensures Perfect Fit and Top Towing Performance . Computer-Aided Design and Fatigue Stress Testing . Designed to Withstand Road Abuse Within Specified Capacities . Backed by a Nationwide Limited Lifetime Warranty
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Ford F-250 | Rear |
- Class 3 Trailer Hitch; 2in. Receiver; Select Ford F-150; F-250; F-350 Super Duty
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13359 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford F-150; F-250; F-350 Super Duty
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight:
- 10000 Lbs.
- 6000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 6000
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
- Gross Trailer Weight:
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford F150, F150 Heritage, F250, F250 Super Duty and F350 Super Duty (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Ford F-250 | V | - | Rear | 8 Cyl 5.4L | 330 |
- Class 3 Hitch; 2in. Receiver; Select Ford F-150; F-250; F-350; F-450 Super Duty
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~With 20 in. Or Smaller Spare Tire~Install Time 30 Minutes
- CURT 13355 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford F-150; F-250; F-350; F-450 Super Duty
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford F150, F150 Heritage, F250, F250 Super Duty, F350 Super Duty and F450 Super Duty (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Ford F-250 | V | - | Rear | 8 Cyl 5.4L | 330 |
- 500 lbs. Weight Carrying [Tongue Weight/Gross Trailer Weight] 900/9000 lbs. When Used With A Weight Distribution Kit~ Install Time Is 20 Minutes
- Front Mount Receiver
- Front Mount Receiver
- Product Attributes:
- Gross Trailer Weight: 500 Lbs.
-
Features:
- Front Mount Receiver
- 2" Square Receiver Tube Opening . Offers a secure and useful attachment point. Neat Appearance, All Frame Attachments . A-Coat Base with Black Powder Coat Finish . Rated up to 9,000 lbs. Line Pull. Rated up to 500 lbs. Tongue Weight . Solid All-Welded Construction for Maximum Strength and Safety . Custom Built According to Manufacturer & Model Year . Computer-Aided Design and Fatigue Stress Testing . Designed to Withstand Road Abuse Within Specified Capacities . Backed by a Nationwide Limited Lifetime Warranty
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Ford F-250 | Front | 4WD |
- 2in. Front Receiver Hitch; Select Ford Expedition; F-150; F-250
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 9000lbs. Straight-Line Pull For Models w/Factory Tow Hooks~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 31049 2-Inch Front Receiver Hitch; Select Ford Expedition; F-150; F-250
- 2 in Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ford Expedition, F150 and F250 (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1998 - Ford F-250 | V | - | Front | 8 Cyl 5.4L | 4WD | 330 |
- Xtra Duty Class 5 Trailer Hitch; 2in. Receiver; Select Ford F150; F250
- 16000lbs. Gross Trailer Weight; 2400lbs. Tongue Weight; 17000lbs. Weight Distributing; 2400lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 20 Minutes
- CURT 15303 Xtra Duty Class 5 Trailer Hitch; 2-In Receiver; Compatible with Select Ford F-150; F-250
- Class V 2 in. Xtra Duty Hitch
- Product Attributes:
- Gross Trailer Weight:
- 16000 Lbs.
- 17000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 16000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 2400
- Drilling Required: No
- Install Time: 20 Minutes
- WC Tongue Weight: 2400
- Weight Distribution: 17000
- Receiver Tube Size: 2.000 In.
- Gross Trailer Weight:
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Large Powerful Main Body
- Protected By A Highly Durable Carbide Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Features Wide Safety Chain Openings For Heavy-Duty Hooks
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- When we came to the limits of towing capacity, we wanted to know what else was out there. What could we discover off the beaten path? So, we kept going. CURT class 5 Xtra Duty hitches begin a class of their own, beyond class 4 and beyond anything the standards dictate. They are designed for the hard road where only full-size pickup trucks, vans and SUVs dare to tread. They are capable of pulling almost any heavy-duty trailer, including toy haulers, dump trailers, logging trailers, small yacht trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component). This particular Xtra Duty class 5 trailer hitch offers a gross trailer weight capacity of 16,000 lbs. and an extra-high tongue weight capacity of 2,400 lbs. It features a 2 in. x 2 in. receiver tube opening to accept a ball mount or hitch-mounted accessory, such as a cargo carrier or w in. mount. It is designed to be a custom-fit trailer hitch for certain years of the Ford F150 and F250 (to verify compatibility with your vehicle, see application info). For a little extra towing power and stability, this class 5 hitch can also be used in combination with a weight distributing hitch. It is rated for 17,000 lbs. WD and 2,400 lbs. WDTW. In our drive to create a more powerful hitch, CURT has not neglected the finer details. Our class 5 trailer hitches are welded with precision and go through multiple stages of cleaning to create a smooth surface that is ready to accept our co-cured finish. To protect them from corrosion, chipping and UV damage, these hitches are immersed in a liquid Bonderite and then finished in a high-quality black carbide powder coat. They come with grade-8 mounting hardware for solid installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Ford F-250 | V | - | Rear | 8 Cyl 5.4L | 330 |
- 2 Inch Receiver
- 2 Inch Receiver
- Trailer Hitch Front
- One of the simplest ways to mount your portable Winch is with the Warn 2 Inch front receiver. Installation is easy. The receiver mounts directly on most vehicle frames without drilling
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Ford F-250 |
Showing 1 - 10 of 10 products
Loading...