2011 Jeep Wrangler Bumper Parts
Choose your Submodel for your 2011 Jeep Wrangler
Image
Product
Price
- Includes Bumper Brackets
- Rear Bumper; Includes Bumper Brackets;
- Rear Bumper
- Product Attributes:
- Bumper Style: Oem
-
Features:
- Rear Bumper
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Wrangler | Rear |
- Plastic
- Rear Bumper; Plastic;
- Rear Bumper
- Product Attributes:
- Bumper Style: Oem
-
Features:
- Rear Bumper
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Wrangler | Rear |
- TrailCrusher Jeep Wrangler JK Steel Front Bumper with Brush Guard; 12.5K
- Carbide Black Powder Coat
- ARIES 2186000 TrailCrusher Black Steel Jeep Wrangler JK Front Bumper with Brush Guard; 12;500 lbs Winch and Shackle Ratings
- TrailCrusher Front Bumper w/Brush Guard
- Product Attributes:
- Location: Front
- WARNING CA Proposition 65: No
- Bumper Location: Front
- Bumper Style: Winch Mount
-
Features:
- Winch And Shackle Rating Of 12500 lbs. For Off-Road Purpose
- Standard Winch Mounting Platform Accepts Most Types Of Winches
- 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
- Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
- No-Drill Install Use Factory Mounting Points w/No Pump Relocation
- One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
- Narrow Width And High Ground Clearance For Off-Road-Style Design
- Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
- Angular Brush Guard Helps Protect Winch And Adds Aggressive Look
- Center Round Cutouts Accept OE Bumper Lights
- Includes Mounting Hardware And 3/8 in. Thick Brackets
- Includes Bumper/ Brush Guard And Mounting Hardware
- The ARIES TrailCrusher Jeep JK bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a Winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep JK bumper is designed to maximize its strength and utility. It is built with 3/16 in. thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4 in. thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. Winch and shackle rating, but it also offers excellent versatility. The Winch platform of the bumper features industry-standard mounting holes to accept most types of w inches, and the shackle mounts accept any pin up to 7/8 in. in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of Winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added Winch protection and an aggressive look on the Jeep JK, this bumper also comes with a stinger-style angular brush guard. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JK like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8 in. steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Wrangler | Front |
- TrailCrusher Jeep Wrangler JK Steel Front Bumper; 12.5K
- Carbide Black Powder Coat
- ARIES 2156000 TrailCrusher Black Steel Jeep Wrangler JK Front Bumper; 12;500 lbs Winch and Shackle Ratings
- TrailCrusher Front Bumper
- Product Attributes:
- Location: Front
- WARNING CA Proposition 65: No
- Bumper Location: Front
- Bumper Style: Full Width W/offset Winch Mount
-
Features:
- Winch And Shackle Ratings Of 12500 lbs. For Off-Road Purpose
- Standard Winch Mounting Platform Accepts Most Types Of Winches
- 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
- Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
- No-Drill Install Use Factory Mounting Points w/No Pump Relocation
- One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
- Narrow Width And High Ground Clearance For Off-Road-Style Design
- Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
- Accept Angular Brush Guard PN 2156050 For Added Winch Protection
- Center Round Cutouts Accept OE Bumper Lights
- Includes Brush Guard And Mounting Hardware
- Bull Bar May Interfere w/Forward-Facing Cameras Or Sensors
- The ARIES TrailCrusher Jeep JK bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a Winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep JK bumper is designed to maximize its strength and utility. It is built with 3/16 in. thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4 in. thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. Winch and shackle rating, but it also offers excellent versatility. The Winch platform of the bumper features industry-standard mounting holes to accept most types of w inches, and the shackle mounts accept any pin up to 7/8 in. in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of Winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added Winch protection and an aggressive look on the Jeep JK, this bumper is also compatible with the stinger-style angular brush guard #2156050 (not included). The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JK like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8 in. steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Wrangler | Front |
Showing 1 - 10 of 113 products
Loading...