2011 Jeep Wrangler Running Board Parts
Choose your Submodel for your 2011 Jeep Wrangler
Image
Product
Price
- Textured Black; For Use w/Bracket PN[10-1096] Sold Separately
- Fusion Step Running Board Kit; Textured Black; For Use w/Bracket PN[10-1096] Sold Separately;
- Fusion Step Running Board Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Certain Chemicals; Which Are Known To The State Of Ca To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For Mor Information Go To: Www.p65warnings.ca.gov
-
Features:
- Combines Elements Of Our Past w/Visions Of Our Future
- New For 2016
- Strongest Step Owens Has Offered
- Full 5 3/4 in. Stepping Surface
- 4 in. x 20 in. Strategically Placed TPO Step Pads
- Easy Entry Into Your Vehicle
- Available In Your Choice Of Textured Powder Coated Finishes
- Will Never Rust
- Gives You That Factory Installed Look
- Owens Classic was created 1965 with the invention of the Classic fifth wheel hitch and the Owens fifth wheel recreational trailer. The business evolved into the manufacturing of a variety of commercial trailers using the same fifth wheel concept. Owens designed the first aluminum running board in the market in 1977, which allowed the fifth wheel customer the ease of unlocking the fifth wheel hitch located in the truck bed. In 1989, Owens sold the fifth wheel hitch and a few years later also sold its trailer manufacturing plant, enabling the company to concentrate on its core business automotive accessories. Owens is a dominant force in the automotive aftermarket with product lines of plastic, fiberglass and aluminum running boards, aluminum tool boxes, dog boxes, garage and trailer accessories as well as its custom made products. During November 2007, Gary Kirtley, II purchased Owens Products and several internal changes were made. The company is now a strong and profitable company continuing to be family owned and operated. All products that Owens sells are proudly made in the USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Jeep Wrangler | V | 3778 | 6 Cyl 3.8L | Unlimited 70th Anniversary | 231 |
- 4 Inch Oval Straight Powder Coated Black Mild Steel Rocker Panel Mount
- Must Remove Factory Rock Rails, Side Steps or Running Boards For Installation
- With Step Pads 4 Inch Oval Straight Powder Coated Black Mild Steel With Welded End Caps Rocker Panel Mount
- TFX 4" Oval Tube Side Steps
- Product Attributes:
- Pads Per Bar: 1
- Step Type: With Step Pads
- Includes Mounting Bracket: Yes - Direct-fit Type
- Weight Capacity (LB): 300 Pound
- Number Of Brackets Per Side: 2 Mounts
- Mounting Location: Rocker Panel
- Color/ Finish: Black Powder Coated
- Prop 65 Y/N: Y
- Drilling Required: No
- End Cap Type: Welded End Caps
- Type: Oval Straight
- Material: Mild Steel
-
Features:
- Mounting Kit Included
- Rocker Panel Mount
- Drilling Not Required
- 1 Pad On The Bar
- 30 To 60 Minutes Professional Installation Time
- Has A 300 Pounds Capacity
- TrailFX Bed Oval Tube Side Steps Provide A Wide And Flat Step Area For Maximum Grip And Stability When Entering Or Exiting Your Vehicle
- Oval Tube Side Steps Feature Fully Welded Ends. No Plastic To Break Or Loosen, And They Look Great! Easy Install
- Limited 3 Year Warranty
- When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone's needs. Step bars to grille guard
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 2011 - Jeep Wrangler | 2 |
- 3 Inch Round Bent Textured Black Steel Without End Caps Frame Body Mount Bolts
- Must Remove Factory Rock Rails, Side Steps or Running Boards For Installation
- With Step Pads 3 Inch Round Bent Textured Black Steel Without End Caps Frame Body Mount Bolts
- TFX Round Tube Side Steps
- Product Attributes:
- Pads Per Bar: 2
- Step Type: With Step Pads
- Includes Mounting Bracket: Yes - Direct-fit Type
- Weight Capacity (LB): 300 Pound
- Number Of Brackets Per Side: 3 Mounts
- Mounting Location: Frame Body Mount Bolts
- Color/ Finish: Black Textured
- Prop 65 Y/N: Y
- Drilling Required: No
- End Cap Type: Without End Caps
- Type: Round Bent
- Material: Steel
-
Features:
- Has A 300 Pounds Capacity
- Single Step For Standard Cab Pickups, Dual Step For 3 And 4 Door Pickups And 4 Door SUVs
- Easy Bolt-On Installation For Most Applications
- Limited 3 Year Warranty
- Frame Body Mount Bolts
- 60 To 180 Minutes Professional Installation Time
- Quality tubular products for that custom look! 3 Inch stainless steel side bars are made of T304 marine grade stainless steel tubing ensures a lifetime of beauty and durability. Limited Lifetime manufacturers warranty against defects in materials and work
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 2011 - Jeep Wrangler | 4 |
- 4 Inch Oval Straight Powder Coated Black Mild Steel Rocker Panel Mount
- Must Remove Factory Rock Rails, Side Steps or Running Boards For Installation
- With Step Pads 4 Inch Oval Straight Powder Coated Black Mild Steel With Welded End Caps Rocker Panel Mount
- TFX 4" Oval Tube Side Steps
- Product Attributes:
- Pads Per Bar: 2
- Step Type: With Step Pads
- Mounting Location: Rocker Panel
- Color/ Finish: Black Powder Coated
- Prop 65 Y/N: Y
- Drilling Required: No
- Includes Mounting Bracket: Yes - Direct-fit Type
- Weight Capacity (LB): 300 Pound
- End Cap Type: Welded End Caps
- Type: Oval Straight
- Material: Mild Steel
-
Features:
- Mounting Kit Included
- Rocker Panel Mount
- Drilling Not Required
- 2 Pads On The Bar
- 30 To 60 Minutes Professional Installation Time
- Has A 300 Pounds Capacity
- TrailFX Bed Oval Tube Side Steps Provide A Wide And Flat Step Area For Maximum Grip And Stability When Entering Or Exiting Your Vehicle
- Oval Tube Side Steps Feature Fully Welded Ends. No Plastic To Break Or Loosen, And They Look Great! Easy Install
- Limited 3 Year Warranty
- When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone's needs. Step bars to grille guard
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 2011 - Jeep Wrangler | 4 |
- 4 Inch Oval Straight Pol Stainless Steel Rocker Panel Mount
- Must Remove Factory Rock Rails, Side Steps or Running Boards For Installation
- With Step Pads 4 Inch Oval Straight Polished Stainless Steel With Welded End Caps Rocker Panel Mount
- TFX 4" Oval Tube Side Steps
- Product Attributes:
- Pads Per Bar: 2
- Step Type: With Step Pads
- Mounting Location: Rocker Panel
- Color/ Finish: Polished
- Prop 65 Y/N: Y
- Drilling Required: No
- Includes Mounting Bracket: Yes - Direct-fit Type
- Weight Capacity (LB): 300 Pound
- End Cap Type: Welded End Caps
- Type: Oval Straight
- Material: Stainless Steel
-
Features:
- Mounting Kit Included
- Rocker Panel Mount
- Drilling Not Required
- 2 Pads On The Bar
- 30 To 60 Minutes Professional Installation Time
- Has A 300 Pounds Capacity
- TrailFX Bed Oval Tube Side Steps Provide A Wide And Flat Step Area For Maximum Grip And Stability When Entering Or Exiting Your Vehicle
- Oval Tube Side Steps Feature Fully Welded Ends. No Plastic To Break Or Loosen, And They Look Great! Easy Install
- Limited Lifetime Warranty
- When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone's needs. Step bars to grille guard
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 2011 - Jeep Wrangler | 4 |
- 4 Inch Oval Straight Pol Stainless Steel Rocker Panel Mount
- Must Remove Factory Rock Rails, Side Steps or Running Boards For Installation
- With Step Pads 4 Inch Oval Straight Polished Stainless Steel With Welded End Caps Rocker Panel Mount
- TFX 4" Oval Tube Side Steps
- Product Attributes:
- Pads Per Bar: 1
- Step Type: With Step Pads
- Includes Mounting Bracket: Yes - Direct-fit Type
- Weight Capacity (LB): 300 Pound
- Number Of Brackets Per Side: 2 Mounts
- Mounting Location: Rocker Panel
- Color/ Finish: Polished
- Prop 65 Y/N: Y
- Drilling Required: No
- End Cap Type: Welded End Caps
- Type: Oval Straight
- Material: Stainless Steel
-
Features:
- Mounting Kit Included
- Rocker Panel Mount
- Drilling Not Required
- 1 Pad On The Bar
- 30 To 60 Minutes Professional Installation Time
- Has A 300 Pounds Capacity
- TrailFX Bed Oval Tube Side Steps Provide A Wide And Flat Step Area For Maximum Grip And Stability When Entering Or Exiting Your Vehicle
- Oval Tube Side Steps Feature Fully Welded Ends. No Plastic To Break Or Loosen, And They Look Great! Easy Install
- Limited Lifetime Warranty
- When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone's needs. Step bars to grille guard
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 2011 - Jeep Wrangler | 2 |
- ActionTrac 48.75in. Powered Running Boards (No Brackets)
- 48.75 in.; Textured Black Powder Coat; Carbon Steel; Mounting Brackets Sold Separately
- ARIES 3025144 ActionTrac 48.75in. Powered Running Boards (No Brackets)
- ActionTrac™ Powered Running Boards
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Di(2-ethylhexyl) Phthalate; Which Is Known To The State Of California To Cause Cancer; And Di-n-butyl Phthalate; Which Is Known To The State Of California To Cause Birth Defects Or O
-
Features:
- Step-Within-Step Design For Easier Access On Large Vehicles
- 3 in. Powered Step Automatically Drops 8 in. When Door Opens
- 4 in. Top Step Provides Convenient Access To Roof Of The Vehicle
- Housing Shields Retractable Step/ Pivot Points And Electronics
- Contoured Design Helps Protect The Rocker Panels From Road Debris
- Simple-2-Install System w/No-Splice Wiring/Brackets Not Included
- Powder-Coated Aluminum Is Durable/ Lightweight And Non-Corrosive
- Integrated Control Module Detects Obstructions
- Single/ Rotary Motor For Fast/ Quiet/ Maintenance-Free Operation
- Integrated Led Lights Activate On Deployment For Added Visibility
- Assembled In USA
- Includes 1 Pair Of Running Boards/Mounting Brackets Sold Separately
- ARIES ActionTrac powered running boards are unique from other power side steps because they are actually two steps in one. This patented step-within-a-step design -- combined with a no-drill bracket installation, control module operation and powder-coated aluminum construction -- truly makes these retractable running boards an asset for the offroad truck or Jeep Wrangler, particularly as lifted truck steps. ActionTrac powered running boards have one 4 in. wide step on top of the main housing and one 3 in. wide that automatically deploys as needed. When the door opens, the control module deploys the power step 8 in. below the main step, 15 in. below the doorsill, depending on the model. This two-step design offers enhanced safety and easier vehicle entry and exit, especially on large, lifted vehicles. It's also very helpful for families with young children and for elderly passengers. The design also allows for a contoured look on the vehicle and offers extra protection for the rocker panels from small stones and other debris. For additional safety, the module is able to detect any obstructions during operation to avoid pinch hazards and damage to the power steps. LED lights are also built into the housing to illuminate the steps when deployed. ARIES ActionTrac powered running boards are made for vehicle-specific installation for a custom fit. They use pre-existing factory holes for the brackets to eliminate drilling. They also do not require any splicing into factory wiring. Each set of retractable running boards is constructed from powder-coated 6061-T6 aluminum to be strong, lightweight and non-corrosive. The quiet, maintenance-free rotary motor is shielded within the main housing, along with the power step pivot points and all electrical components, protecting them from the harsh elements and promoting long life. NOTE: Mounting brackets for these running boards are not included and must be purchased separately or as part of a kit.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Jeep Wrangler | 70th Anniversary |
- ActionTrac 69.6in. Powered Running Boards (No Brackets)
- 69.6 in.; Carbide Black Powder Coat; 6061-T6 Aluminum; Mounting Brackets Sold Separately
- ARIES 3025165 ActionTrac 69.6in. Powered Running Boards (No Brackets)
- ActionTrac™ Powered Running Boards
- Product Attributes:
- Side Component Type: Board
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Di(2-ethylhexyl) Phthalate; Which Is Known To The State Of California To Cause Cancer; And Di-n-butyl Phthalate; Which Is Known To The State Of California To Cause Birth Defects Or O
-
Features:
- Step-Within-Step Design For Easier Access On Large Vehicles
- 3 in. Powered Step Automatically Drops 8 in. When Door Opens
- 4 in. Top Step Provides Convenient Access To Roof Of The Vehicle
- Housing Shields Retractable Step/ Pivot Points And Electronics
- Contoured Design Helps Protect The Rocker Panels From Road Debris
- Simple-2-Install System w/No-Splice Wiring/Brackets Not Included
- Powder-Coated Aluminum Is Durable/ Lightweight And Non-Corrosive
- Integrated Control Module Detects Obstructions
- Single/ Rotary Motor For Fast/ Quiet/ Maintenance-Free Operation
- Integrated Led Lights Activate On Deployment For Added Visibility
- Assembled In USA
- Includes 1 Pair Of Running Boards/Mounting Brackets Sold Separately
- ARIES ActionTrac powered running boards are unique from other power side steps because they are actually two steps in one. This patented step-within-a-step design -- combined with a no-drill bracket installation, control module operation and powder-coated aluminum construction -- truly makes these retractable running boards an asset for the offroad truck or Jeep Wrangler, particularly as lifted truck steps. ActionTrac powered running boards have one 4 in. wide step on top of the main housing and one 3 in. wide that automatically deploys as needed. When the door opens, the control module deploys the power step 8 in. below the main step, 15 in. below the doorsill, depending on the model. This two-step design offers enhanced safety and easier vehicle entry and exit, especially on large, lifted vehicles. Its also very helpful for families with young children and for elderly passengers. The design also allows for a contoured look on the vehicle and offers extra protection for the rocker panels from small stones and other debris. For additional safety, the module is able to detect any obstructions during operation to avoid p in. hazards and damage to the power steps. LED lights are also built into the housing to illuminate the steps when deployed. ARIES ActionTrac powered running boards are made for vehicle-specific installation for a custom fit. They use pre-existing factory holes for the brackets to eliminate drilling. They also do not require any splicing into factory wiring. Each set of retractable running boards is constructed from powder-coated 6061-T6 aluminum to be strong, lightweight and non-corrosive. The quiet, maintenance-free rotary motor is shielded within the main housing, along with the power step pivot points and all electrical components, protecting them from the harsh elements and promoting long life. NOTE: Mounting brackets for these running boards are not included and must be purchased separately or as part of a kit.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Jeep Wrangler | Unlimited 70th Anniversary |
- ActionTrac 69.6in. Powered Running Boards; Select Jeep Wrangler JK
- 69.6 in.; Carbide Black Powder Coat; 6061-T6 Aluminum; Includes Pair Of Running Boards/Mounting Hardware/Wiring Harness
- ARIES 3036570 ActionTrac 69.6-Inch Retractable Powered Running Boards; Fits Select Jeep Wrangler JK
- ActionTrac™ Powered Running Boards
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Di(2-ethylhexyl) Phthalate; Which Is Known To The State Of California To Cause Cancer; And Di-n-butyl Phthalate; Which Is Known To The State Of California To Cause Birth Defects Or O
-
Features:
- Step-Within-Step Design For Easier Access On Large Vehicles
- 3 in. Powered Step Automatically Drops 8 in. When Door Opens
- 4 in. Top Step Provides Convenient Access To Roof Of The Vehicle
- Housing Shields Retractable Step/ Pivot Points And Electronics
- Contoured Design Helps Protect The Rocker Panels From Road Debris
- Simple-2-Install System w/No-Drill Brackets And No-Splice Wiring
- Powder-Coated Aluminum Is Durable/ Lightweight And Non-Corrosive
- Integrated Control Module Detects Obstructions
- Single/ Rotary Motor For Fast/ Quiet/ Maintenance-Free Operation
- Integrated Led Lights Activate On Deployment For Added Visibility
- Assembled In USA
- Includes One Pair Of Running Boards And Mounting Hardware
- ARIES ActionTrac powered running boards are unique from other power side steps because they are actually two steps in one. This patented step-within-a-step design -- combined with a no-drill bracket installation, control module operation and powder-coated aluminum construction -- truly makes these retractable running boards an asset for the offroad truck or Jeep, particularly as lifted truck steps. ActionTrac powered running boards have one 4 in. wide step on top of the main housing and one 3 in. wide that automatically deploys as needed. When the door opens, the control module deploys the power step 8 in. below the main step, 15 in. below the doorsill, depending on the model. This two-step design offers enhanced safety and easier vehicle entry and exit, especially on large, lifted vehicles. Its also very helpful for families with young children and for elderly passengers. The boards contour to the vehicle and offer extra protection for the rocker panels from small road debris. For additional safety, the module is able to detect any obstructions during operation to avoid p in. hazards. LED lights are also built into the housing to illuminate the steps when deployed. ARIES ActionTrac powered running boards are made for vehicle-specific installation for a custom fit. They use pre-existing factory holes for the brackets to eliminate drilling. They also do not require any splicing into factory wiring. These particular running boards fit specific years of the Jeep Wrangler (see application info to verify fitment). Each set is constructed from powder-coated aluminum to be strong, lightweight and non-corrosive. The quiet, maintenance-free rotary motor is shielded within the main housing, along with the power step pivot points and all electrical components, protecting them from the harsh elements. NOTE: Boards, brackets and wiring are included.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Jeep Wrangler | Unlimited 70th Anniversary |
- Rocker Step Running Boards; Select Jeep Wrangler JK
- 3 in.; Flat Profile; Textured Black Powder Coat Carbon Steel; Board And Bracket
- ARIES 2074100 Black Steel Rocker Step Guard Running Boards; Select Jeep Wrangler JK
- Rocker Steps Running Boards
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Double-Tube Layout And 3 in. Wide Top Plate Provides Solid Step
- Heavy-Duty Design Offers Extra Protection For The Vehicle Sides
- Flat Profile Increases Ground Clearance To Be Off-Road Ready
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Dual-Layer E-Coat And Powder Coat Finish For Corrosion Resistance
- High-Strength/ All-Steel Construction w/No Plastic Parts
- Pre-Welded Mounting Brackets For Increased Rigidity
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Includes Side Steps And Mounting Hardware
- Sometimes side bars, nerf bars and running boards just arent the right fit for the off-roader. When your vehicle is beefed up and built out the way it was born to be, you need a step up from ordinary. ARIES Rocker Steps are the ideal side accessory for the off-road-style truck, Jeep or SUV, featuring extra protection for your rocker panels, a convenient 3 in. wide step up and enough ground clearance to allow you to hold nothing back. While many rocker panel protectors are simple steel panels or tubes, the ARIES Rocker Step is something more. In addition to its all-steel construction, it has a wide, flat profile that provides two key advantages. First, it offers a convenient, comfortable step up into your vehicle The double-tube layout and welded top plate create a sturdy, 3 in. wide stepping surface. Second, the flat design offers added ground clearance. Unlike some side bars that are mounted down and away from the vehicle, ARIES Rocker Steps are set high enough to clear brush, boulders and other off-road debris. They also feature a durable E-coat and textured black powder coat finish to resist rust and hide scratches and grime. Mounting ARIES Rocker Steps is fast and easy. They come with vehicle-specific mounting brackets, pre-welded into place, to provide reliable footing and a custom fit on your vehicle. This particular set of Rocker Steps fits specific years of the Jeep Wrangler (see application info to verify fitment). The brackets install using pre-existing mounting locations to eliminate the need for drilling and cut down on installation time. ARIES Rocker Steps are sold in pairs for the driver and passenger side and come with all necessary mounting hardware.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Jeep Wrangler | 70th Anniversary |
Showing 1 - 10 of 43 products
Loading...