2020 Ford F 150 Bumper Parts
Choose your Submodel for your 2020 Ford F-150
Image
Product
Price
- with Double 3.5 in. Square Lights Holes; Fits w/o Or with Parking Sensors; with Adaptive Cruise Control; Retains Factory Tow Hooks/Skidplate; Non-Winch
- Alumilite Front Bumper; with Double 3.5 in. Square Lights Holes; Fits w/o Or with Parking Sensors; with Adaptive Cruise Control; Retains Factory Tow Hooks/Skidplate; Non-Winch;
- Alumilite Front Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Attn: State Of California Consumers Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Bumper Style: Modular
-
Features:
- Aluminum Front Bumper
- Reinforced Strength with 3/16 in. Aluminum Plating
- 1/4 in. Steel Brackets And Hardware Included
- Works with Adaptive Cruise Control w/o Recalibrating
- Accommodates Factory Skid Plate And Tow Hooks
- Hold Up To Four 3 in. Cube Lights
- Holds Up To Two 20 in. Light Bars
- Works with All OE Parking Sensors If Equipped
- Removable RT Light Bracket Included
- Direct Fit/ No Drill/ Easy Install/ Will Not Rust
- 2 Year Limited Warranty on Finish/Limited Life-Time on Structure
- Compliment your 2017-2021 aluminum-bodied Ford Raptor with this Alumilite bumper. This aluminum bumper can fit 2-4 (depending if you have Adaptive Cruise sensor) square 3" cube LED's, like the Baja Designs Squadron, and a 20" LED light bar, like the Baja Designs S8, fits under the included bolt-on RT light mount. There is no frame cutting required to install this bumper and the Adaptive Cruise Control sensor, if present, bolts directly to the bumper and keeps it in the factory location. No need to relocate it or worry about it malfunctioning. The RT Light Mount is bolt-on, so if you do have the front facing camera in the grille, you may want to leave off the RT Light Mount as it will be visible in the camera.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford F-150 | Front | Raptor |
- with 3.5 in. Double Or Single Square Light Holes; with Bolt-On RT Series Light Bracket; Fits w/o Or with Parking Sensors; Retains Factory Tow Hooks; Non-Winch
- Alumilite Front Bumper; with 3.5 in. Double Or Single Square Light Holes; with Bolt-On RT Series Light Bracket; Fits w/o Or with Parking Sensors; Retains Factory Tow Hooks; Non-Winch;
- Alumilite Front Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Attn: State Of California Consumers Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Bumper Style: Modular
-
Features:
- 1/8 inch External Shell
- 1/4 inch Internal Support and Brackets
- Three Stage Costing Process
- Three Piece Bracket Assembly
- Choice of Round or Square Light Pockets On Most Models
- Available RT
- PR and Grille Guard Series Options On Most Models
- Winch and Non-Winch Models Available
- Shackle Mount Option on Winch Models only
- W/ and W/O Equipped Parking Sensors and Adaptive Cruse Control
- 1 Year Limited Warranty on Finish/Limited Life-Time on Structure
- Compliment your 2018-2020 aluminum-bodied Ford F-150 with this Alumilite bumper. This aluminum bumper can fit 2-4 (depending if you have Adaptive Cruise sensor) square 3" cube LED's, like the Baja Designs Squadron, and a 20" LED light bar, like the Baja Designs S8, fits under the included bolt-on RT light mount. There is no frame cutting required to install this bumper and the Adaptive Cruise Control sensor, if present, bolts directly to the bumper and keeps it in the factory location. No need to relocate it or worry about it malfunctioning. The RT Light Mount is bolt-on, so if you do have the front facing camera in the grille, you may want to leave off the RT Light Mount as it will be visible in the camera.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford F-150 | Front | Police Responder |
- with License Plate Light; with Or w/o Parking Sensors
- Alumilite Rear Bumper; with License Plate Light; with Or w/o Parking Sensors;
- Alumilite Rear Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Attn: State Of California Consumers Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov -
- Bumper Style: Modular
-
Features:
- Aluminum Rear Bumper
- Designed specifically for the 2015-2020 aluminum-bodied Ford F-150, this Alumilite bumper adds style, function and completes the build when paired with the AL-FBM84FDN-RT Alumilite front F-150 bumper. This aluminum bumper works with or without OEM backup sensors and is ready to be loaded with a pair of aftermarket lights. Your aluminum body Ford F-150 was meant to have this bumper on it!
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford F-150 | Rear | Police Responder |
- with License Plate Light; with Or w/o Parking Sensors
- Alumilite Rear Bumper; with License Plate Light; with Or w/o Parking Sensors;
- Alumilite Rear Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Attn: State Of California Consumers Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Bumper Style: Modular
-
Features:
- Aluminum Rear Bumper
- ICI's Alumilite Series Black Aluminum rear bumper AL-RBM17FDN, is designed to fit the 2017-2022 Ford Raptor. This bumper also works with or without backup sensors and is ready to be loaded with a set of aftermarket lights. (Lights sold separately).
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford F-150 | Rear | Raptor |
- Includes [2] Black-Series LED Flush Mount Lights; Wiring Harness; Backup Sensor Relocators
- Heavy Duty Rear LED Bumper; Includes [2] Black-Series LED Flush Mount Lights; Wiring Harness; Backup Sensor Relocators;
- Heavy Duty Rear LED Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer; And Birth Defects Or Other Reproductive Harm. For More Information: Www.roughcountry.com/prop65 And Www.p65warnings.ca.gov
- Bumper Style: Light Mount
-
Features:
- Easy To Install!
- Durable
- Steel Construction
- Includes [2] Rough Country Led Cubes
- Integrated Steps For Easy Access To Bed
- Retains Factory Receiver Hitch
- Includes Backup Sensor Relocators
- Give the rear of your F-150 an aggressive, new appearance with Rough Countrys Rear LED Bumper. This easy-to-install upgrade gives your truck an improved look and better functionality, with two pre-installed Rough Country LED cubes that offer impressive off-road illumination! Rough Countrys Rear LED Bumper is made of a durable, all-steel construction thats ready to handle whatever you dish out. Each bumper features two Rough Country Black-Series 2in LED Flush Mount Cubes for rear illumination, and two integrated steps for easy access to the bed. Each bumper also includes sensor relocators to allow you to retain the vehicles anti-collision system. Unlike some aftermarket bumpers for this model, Rough Countrys LED Rear Bumper allows you to retain the factory receiver hitch for towing.Rough Countrys Rear LED Bumper is easy to install with common tools in a home garage! Best of all each bumper includes a 3-year warranty!
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford F-150 | Rear | Police Responder |
- Hammer Black Powder Coat Finish Does Not Fit Raptor Models
- Bomber Rear Bumper; Hammer Black Powder Coat Finish;
- Bomber Rear Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Backup Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Two Cube Lights
- The Addictive Desert Designs Bomber rear bumper features a clean, modern look. The plate steel construction offers strength, while remaining low profile. The angles meet perfectly with the body lines of the vehicle to make it look as though it was there from the factory. Give your Ford F-150 additional lighting with the two standard rear facing cube light mounts. Factory amenities such as parking sensors, tow hitch, and dual exhaust are all retained. As always, this product is fully bolt-on and made in America.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford F-150 | Rear | Police Responder |
- Hammer Black; Panel Color Satin Black; Bolt-On Does Not Fit Raptor Models
- ADD PRO V2 Front Bumper; Hammer Black; Panel Color Satin Black; Bolt-On;
- ADD PRO V2 Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Four 6 in. Round Lights Or Two 20 in. Light Bars
- Take your 2018 Ford F-150 to the next leVEl with the ADD PRO Bolt-On V2 Front Bumper. All stock features like tow hooks and adaptiVE cruise control are retained with the V2. Our top of the line front bumper provides a radius main tube that follows the natural contour of your truck perfectly, allowing the bumper to sit flush with the valance/grille. For added strength we'VE added a light-weight 3/16" thick aluminum skid plate. Like all AddictiVE Desert Design products, the ADD PRO Bolt-On V2 is made in America and comes with a Hammer black powder coat finish and satin black skid plate.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 2020 - Ford F-150 | V | 3496 | Front | 6 Cyl 3.5L | Police Responder | 4 | 213 |
- Hammer Black; Panel Color Satin Black; Universal Light Mnt. System; Side Mnt. 10 in.
- Stealth Fighter Front Bumper; Hammer Black; Panel Color Satin Black; Universal Light Mnt. System; Side Mnt. 10 in.;
- Stealth Fighter Front Bumper
- Product Attributes:
- Bumper Style: Stealth
-
Features:
- Hammer Black Powder Coat finish With Satin Black Panels
- Universal Light Mount System
- Mount For 10 in. Light Bars Behind Side Panels
- Addictive Desert Designs Stealth Fighter front bumper for the 2017 Ford Raptor is one of our tightest fitting and most aggressive looking bumpers on the market. Measuring only 0.5 in. farther from the grille than the factory bumper the Stealth Fighter gives your Raptor a tight fitting steel plate designed bumper. A modern radius plate design allows the Stealth Fighter to keep a tight fit around the front of your truck to match the factory design, while giving your the added protection of a steel plated bumper. The center of the bumper has a universal light mount system that allows you to mount up to 10 cube lights or a 40 in. radius or straight LED, or anything in between to give your Ford Raptor the additional lighting setup that you need. Additional mounts for RIGID 10 in. SR LEDs behind the side panels give your Raptor even more lighting options.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 2020 - Ford F-150 | V | 3496 | Front | 6 Cyl 3.5L | Raptor | G | 213 |
- Hammer Black; Panel Color Satin Black; Bolt-On
- ADD PRO Front Bumper; Hammer Black; Panel Color Satin Black; Bolt-On;
- ADD PRO Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Universal Mounts Up To 6 Cube Lights Or 20 in. Radius Light Bar
- Combining aesthetics with functionality, the ADD PRO Bolt-On Ford Raptor front bumper doesnt sacrifice the look of your truck for approach angle. Our ADD PRO bumper gives your truck maximum approach angle for your off-road adventures without relocating your intercooler or cutting your frame. The ADD PRO front bumper truly contours the body lines of the Raptor without the need of a plastic valence. Built with .120 in. wall steel tubing for strength and durability and an aluminum skid plate for protection. Mounting options for lights underneath the main tube to keep them tucked away allow for up to 6 cube lights or a 20 in. radius LED bar.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 2020 - Ford F-150 | V | 3496 | Front | 6 Cyl 3.5L | Raptor | G | 213 |
- w/Pre-Runner Guard
- Matrix Front Bumper; w/Pre-Runner Guard;
- Matrix Front Bumper
- Product Attributes:
- WARNING CA Proposition 65: No
- Bumper Style: Winch Mount
-
Features:
- Winch Ready-Accepts Up To 12000 lbs. Warn Zeon Winch
- 3/16 in. Steel Construction
- 140 lbs.
- Mounting Options For 2x2 in. Cube Lights To Maximum Led Coverage
- Front Bumper w/Provided Brackets That Tie Directly To The Frame
- MADE IN THE USA
- We combined the best aspects of our Premium Winch Bumper and our Vengeance Series to give you the best slim fitting steel bumper in the truck game MATRIX SERIES! Equipped to hold a 30 in. light bar, 4 cube LED lights, and a 12,000 lb Winch…The Matrix Series gives you the peak of style and utility for your truck. Available in a no guard or pre-runner guard option.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford F-150 | Front | Raptor |
Showing 1 - 10 of 55 products
Loading...