2021 Chevrolet Silverado 1500 Bumper Parts
Choose your Submodel for your 2021 Chevrolet Silverado 1500
Image
Product
Price
- Armour II Heavy Duty Modular Front Bumper-Bumper Only
- Matte Black Steel Modular Bumper only
- Product Attributes:
- Style: Modular
-
Features:
- Armour II Heavy Duty Modular Front Bumper-Bumper Only - Patented Design- compatible with 2019-2021 Chevrolet Silverado 1500
- License plate mounting bracket included
- Optional sensor relocation Kit (Sold Separately)
- Includes mounting hardware, and step-by-step installation instructions / 3-year Manufacturer's Limited Warranty
- Fabricated from 3mm thick cold rolled steel plate
- Semi-gloss powder-coat over E-Coat primer for maximum rust and chip resistance
- Increased ground clearance for better off-road access
- Closely conforms to front end profile for an OEM look
- 3-pc modular design - saves heavy freight charges (2 boxes).
- Bolt-on no drill installation
- Mounting points in place for Black Horse 20" or 30" LED Light bars
- Lighting recesses covered with protective steel mesh grilles
- Black Horse Off Road Armour II Heavy Duty Modular Front Bumper-Bumper Only Matte Black Steel Modular Bumper only Includes Diesel models and 2022 1500 LTD & Excl. 19-21 1500 LD
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Chevrolet Silverado 1500 | WT |
- Armour II Heavy Duty Modular Front Bumper Kit
- Matte Black Steel Modular Full Set (Bumper, Bull Nose, & Skid Plate)& Includes 1 20in Double Row LED Light Bar
- Product Attributes:
- Style: Modular
-
Features:
- Armour II Heavy Duty Modular Front Bumper-Patented Design- compatible with 2019-2021 Chevrolet Silverado 1500
- License plate mounting bracket included
- Optional sensor relocation Kit (Sold Separately)
- Includes mounting hardware, and step-by-step installation instructions / 3-year Manufacturer's Limited Warranty
- Fabricated from 3mm thick cold rolled steel plate
- Semi-gloss powder-coat over E-Coat primer for maximum rust and chip resistance
- Increased ground clearance for better off-road access
- Closely conforms to front end profile for an OEM look
- 3-pc modular design - saves heavy freight charges (2 boxes).
- Bolt-on no drill installation
- Mounting points in place for Black Horse 20" or 30" LED Light bars
- Lighting recesses covered with protective steel mesh grilles
- Black Horse Off Road Armour II Heavy Duty Modular Front Bumper Kit Matte Black Steel Modular Full Set (Bumper, Bull Nose, & Skid Plate)& Includes 1 20in Double Row LED Light Bar Includes Diesel models and 2022 1500 LTD & Excl. 19-21 1500 LD
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Chevrolet Silverado 1500 | WT |
- Armour II Heavy Duty Modular Front Bumper Kit
- Matte Black Steel Modular Full Set (Bumper, Bull Nose, & Skid Plate)& Includes 1 30in LED Light Bar
- Product Attributes:
- Style: Modular
-
Features:
- Armour II Heavy Duty Modular Front Bumper-Patented Design- compatible with 2019-2021 Chevrolet Silverado 1500
- License plate mounting bracket included
- Optional sensor relocation Kit (Sold Separately)
- Includes mounting hardware, and step-by-step installation instructions / 3-year Manufacturer's Limited Warranty
- Fabricated from 3mm thick cold rolled steel plate
- Semi-gloss powder-coat over E-Coat primer for maximum rust and chip resistance
- Increased ground clearance for better off-road access
- Closely conforms to front end profile for an OEM look
- 3-pc modular design - saves heavy freight charges (2 boxes).
- Bolt-on no drill installation
- Mounting points in place for Black Horse 20" or 30" LED Light bars
- Lighting recesses covered with protective steel mesh grilles
- Black Horse Off Road Armour II Heavy Duty Modular Front Bumper Kit Matte Black Steel Modular Full Set (Bumper, Bull Nose, & Skid Plate)& Includes 1 30in LED Light Bar Includes Diesel models and 2022 1500 LTD & Excl. 19-21 1500 LD
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Chevrolet Silverado 1500 | WT |
- 45lb shell, reinforced 3/16 inch 5052 Aluminum plating, steel brackets
- W/WO Sensors No Winch
- Works with or without factory parking sensors as direct fit, reuse factory tow hooks, four 3" LED cube light brackets, one internal light bar bracket, all hardware and brackets included, body modification not required
- ICI Alumilite Front Bumper
- Product Attributes:
- Retains Camera: Yes
- Prop 65 (C, R, or CR): Cr
- Grade Type:
- Heavy Duty
- Premium
- Mounting Hardware Included: Yes
- Retains Factory Tow Hooks: Yes
- Retains Adaptive Cruise Control: Yes
- Retains Factory Fog Lights: No
- Bar Finish: Powdercoat Matte Black
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Lighting Ports: Yes
- Material Thickness: 3/16
- Government Safety Standards Approved: No
-
Features:
- ALUMINUM FRONT NON-WINCH BUMPER BUILT WITH REINFORCED 3/16 INCH 5052 ALUMINUM PLATING
- WILL NOT RUST
- BUMPER SHELL WEIGHS LESS THAN 50LBS
- FITS W/ OR W/O PARKING SENSORS
- DOUBLE 3.5 INCH SQUARE LIGHTS HOLES
- RETAINS FACTORY TOW HOOKS
- ICI's Alumilite Series offers the Next generation of Aftermarket Truck Bumpers that last longer, plays harder, performs better for your truck. Built with reinforced 5052 3/16" Aluminum, comparable in strength to steel but weighs less than 50 lbs. and will not rust. Accommodates all OE factory parking sensors out of the box, direct fit. Primed, eco-dipped, and powder coated black. Internal LED lightbar option plus multiple LED cube bracket locations. Limited Life Time structural warranty. Steel brackets and all hardware included.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chevrolet Silverado 1500 | Front |
- Hammer Black; Panel Color Satin Black; Mount For 20 in. Straight Light Bar In Center
- Chevy 1500 Stealth Fighter Front Bumper for Diesel engine with D-ring Clevis Mounts with Sensors With 10 Single cube light/40" Universal mounts and cubes on the side in Hammer Black with Satin Black panels
- Stealth Fighter Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Fits Diesel And Gas Models
- Fits Sensor And Non-Sensor Models
- Comes With Sensor Hole Plugs
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Universal Light Mount / Up To 10 Cube Lights Or 40 in. Light Bar
- Mounts For Cube Lights On Sides
- The Chevy Silverado 1500 has never looked better than with the Stealth Fighter front bumper. A radius plate steel design gives your Silverado added front end protection without all the extra bulk. Matching the Chevy 1500 body lines, the Stealth Fighter is a tight fitting bumper that compliments the Silverado's look. Our patented universal light mount system allows mounting up to 10 cube lights or a 40" radius light bar in the center of the bumper. Mount any combination of brand, size, and style light to give your Chevy the added lighting you need. Additional lighting mounts a single cube light behind each side panel. Fully bolt-on means that there is no cutting or welding required to install the Stealth Fighter front bumper. Designed to keep the factory air dams and comes with optional sensor cutouts to retain OEM features. Reinforced D-Ring mounts and optional winch mount provide your truck with added utility to pull through any tough situation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Chevrolet Silverado 1500 | L | 2993 | Front | 6 Cyl 3.0L | 183 |
- Accomodates Front Camera
- Flat Steel for an OEM Look, will Accommodate most 20.0in. Double Row Lights, both E-Coated & Powder Coated with a Textured Matte Finish & Supports Adaptive Cruise Control and Front Emblem Cameras (If applicable). Comes with a 2yr Warranty
- Elevation Bumper
- Product Attributes:
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Chevrolet Silverado 1500 |
- Models without Supercruise
- Highlights include sensor & reverse light ready, both E-Coated and Powder Coated flat steel with a Textured Matte finish, convenient step built in for easy bed access and comes with a 2-year warranty
- Elevation Bumper
- Product Attributes:
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Chevrolet Silverado 1500 |
- Texture Black
- Stealth Winch Front Bumper; Texture Black;
- Stealth Winch Front Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Bisphenol And Zinc Which Is Known To The State Of California To Cause Cancer; Birth Defects; Eye Damage; And Allergic Skin Conditions. For More Information; Go To Www.p65warnings.ca.gov.
- Bumper Style: Winch Mount
-
Features:
- Made In American And Texas Strong USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Superior Foot Forward Winch Mount
- Superior Foot Forward Winch Mount Fits Warn M12000/Smittybilt XRC
- Recessed Light Ports For Auxiliary Lighting
- Road Armor is the world's premier bumper manufacturer, dedicated to producing the ultimate in form, fit, and finish. We were the first to create a multifaceted steel bumper design and have led the industry since 2000. There are a lot of other manufacturers on the market these days, and we encourage you to learn the difference — The Road Armor difference — because not all replacement bumpers are created equal. There's no substitute for the Original Road Armor Bumpers, 100% Made in Texas, USA and backed by our Lifetime Guarantee.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chevrolet Silverado 1500 | Front |
- Pre-Runner Guard; Texture Black
- Stealth Winch Front Bumper; Pre-Runner Guard; Texture Black;
- Stealth Winch Front Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Bisphenol And Zinc Which Is Known To The State Of California To Cause Cancer; Birth Defects; Eye Damage; And Allergic Skin Conditions. For More Information; Go To Www.p65warnings.ca.gov.
- Bumper Style: Winch Mount
-
Features:
- Made In American And Texas Strong USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Superior Foot Forward Winch Mount
- Superior Foot Forward Winch Mount Fits Warn M12000/Smittybilt XRC
- Recessed Light Ports For Auxiliary Lighting
- Road Armor is the world's premier bumper manufacturer, dedicated to producing the ultimate in form, fit, and finish. We were the first to create a multifaceted steel bumper design and have led the industry since 2000. There are a lot of other manufacturers on the market these days, and we encourage you to learn the difference — The Road Armor difference — because not all replacement bumpers are created equal. There's no substitute for the Original Road Armor Bumpers, 100% Made in Texas, USA and backed by our Lifetime Guarantee.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chevrolet Silverado 1500 | Front |
- Texture Black
- Spartan Rear Bumper; Texture Black;
- Spartan Rear Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Bisphenol And Zinc Which Is Known To The State Of California To Cause Cancer; Birth Defects; Eye Damage; And Allergic Skin Conditions. For More Information; Go To Www.p65warnings.ca.gov.
- Bumper Style: Custom
-
Features:
- Made In American And Texas Strong
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Square Light Ports For Led Cubes
- Raw Unfinished Steel
- Lifetime Structural Warranty
- Lights Are Not Included
- Road Armor is the world's premier bumper manufacturer, dedicated to producing the ultimate in form, fit, and finish. We were the first to create a multifaceted steel bumper design and have led the industry since 2000. There are a lot of other manufacturers on the market these days, and we encourage you to learn the difference ' The Road Armor difference ' because not all replacement bumpers are created equal. There(TM)s no substitute for the Original Road Armor Bumpers, 100% Made in Texas, USA and backed by our Lifetime Guarantee.The Spartan Series Rear Bumper is designed to be light weight, highly customizable and affordable, all while maintaining Road Armor's tradition of strength and quality. This easy to install bumper is unique because it allows trucks with minimal suspension upgrades to be able to mount the bumper and not affect the handling of the vehicle. This bumper can be used on a stock trucks to a highly customizable beast!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Chevrolet Silverado 1500 | Rear |
Showing 1 - 10 of 42 products
Loading...