2021 Ram 1500 Bumper Parts
Choose your Submodel for your 2021 Ram 1500
Image
Product
Price
- Hammer Black; Panel Color Satin Black; Mount For Up To 10 Cube Lights Or 40 in. Curved Light Bar
- RAM 1500 TRX Stealth Fighter Front Bumper with D-Ring Clevis Mounts With 10 Single small square light/40" Universal mounts and dually on the side in Hammer Black with Satin Black panels
- Stealth Fighter Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Up To 10 Cube Lights Or 40 in. Light Bar
- Mounts For Cube Lights On Sides
- The Stealth Fighter Front Bumper is a low-profile plate steel design. The radiused front end keeps it tight to the front of your Ram TRX while following key bodylines to make it look like it belongs from the factory. A universal light mount system allows for a 40" curved light bar or up to cube lights in the center of the bumper, and there are two additional cube light mounts behind each side panel. A full skid plate comes down and attaches in factory mounting locations to make sure your shock reservoirs remain protected. OEM amenities such as parking sensors and marker lights are retained. Reinforced clevis mounts provide a mounting point for 3/4" D-Rings. As always, this product is fully bolt-on and made in America.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 6166 | Front | 8 Cyl 6.2L | TRX | 376 |
- Hammer Black; with Satin Black Panels; Mounts For 4 Rigid 360 6 in.
- 2021 - Up Ram TRX Bomber Front Bumper with 4 Rigid 360 6" Mounts and Cube Light Mounts in Side Panels with Parking Sensor Cutouts in Hammer Black with Satin Black panels
- Bomber Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Transform the front end of your Ram TRX with the Addictive Desert Designs Bomber Front Bumper. The modern plate steel design brings aggressive styling while remaining low-profile. The center of the bumper provides inset mounting points for four Rigid 360 6 inch round lights, while each side panel provides a cube light mounting point.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 6166 | Front | 8 Cyl 6.2L | TRX | 376 |
- ADD PRO Bolt-On Rear Bumper
- Hammer Black; Bolt-On
- 2021 - Up Ram TRX Pro Bolt-On Rear Bumper with Back Up Sensors with Mounts for 2 Cube Lights in Hammer Black with Satin Black panels
- ADD PRO Rear Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Backup Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Cube Lights
- ADD Offroad's Ram TRX PRO Bolt-On Rear Bumper is manufactured with a tubular steel frame coupled with steel & aluminum plates to provide solid protection to the rear of your truck, while still maximizing ground clearance.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Rear | TRX |
- Hammer Black Powder Coat Finish; 20 In. Light Bar Mount
- Ram TRX 2021 - Up Phantom Front Bumper With Mounts For Universal 20" RDS And Mounts For Universal 10" Single Row Light In Sides In Hammer Black With Satin Black Panels
- Phantom Front Bumper
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- 20 In. Light Bar Mount
- 2 - 10 In. Single Row LED Light Mounts
- Parking Sensor Cutouts
- This low-profile TRX front bumper features a prerunner inspired layout. The Phantom is constructed from plate steel for a more enhanced style, rather than the traditional tube steel. Its knife's edge design was intended to mimic the look of trailing arms. A lightweight 3/16-inch aluminum skid plate provides full protection without adding excess weight. The skid also features vented cutouts for proper intercooler air flow.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 6166 | Front | 8 Cyl 6.2L | TRX | 376 |
- 2 Stage Black Powder Coated; Pre-Runner Guard
- Vengeance Front Bumper; 2 Stage Black Powder Coated; Pre-Runner Guard;
- Vengeance Front Bumper
- Product Attributes:
- WARNING CA Proposition 65: No
- Bumper Style: Pre-runner
-
Features:
- Light Weight
- Steel Construction
- Integrated 20 in. Light Bar Housing
- Mounting Options For Two 2 in. LED
- Lower Cut Offs For Better Air Flow
- Fits High And Tight
- Fab Fours' new line of light weight bumpers: Vengeance Series. These premium steel bumpers are constructed to be lightweight (Weighing only 75lbs) and offer a sleek and stylish finish for both the front and rear of your vehicle. Center Cutout for 20 in. LED light bar and mounting options on each side for (2) Rigid Industries' Dually's to give you maximum LED light coverage. The fit of this bumper is high and tight and comes with lower cutouts to provide airflow while also giving you that aggressive look both on and off the road. Available in a no guard or pre-runner guard option.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Front | TRX Launch Edition |
- 2 Stage Black Powder Coated; Steel
- Grumper Front Winch Bumper; 2 Stage Black Powder Coated; Steel;
- Grumper Front Winch Bumper
- Product Attributes:
- WARNING CA Proposition 65: No
- Bumper Style: Winch Mount
-
Features:
- Revolutionary Combination Of Both Grille And Winch Bumper
- Provides Greater Tire Clearance
- Strategically Placed Cutouts For Maximum Airflow
- Engineered To Work With Up To A 12000 Lbs Warn Zeon Winch
- Complete Bolt On Installation w/Stainless Steel Hardware
- MADE IN THE USA
- From Concept to Reality…The GRUMPER Truck offers a revolutionary combination of both grille and Winch bumper. Fully Customizable with removable inserts, this aggressive yet sophisticated piece is sure to change the way we look at bumpers going forward for the Dodge 1500. **US PATENTED**
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Front | TRX Launch Edition |
- Hammer Black Powder Coat Finish; Two 10 In. Single Row LED Light Mounts
- Ram TRX 2021 - Up Phantom Rear Bumper with 10" SR Mounts on Sides in Hammer Black with Satin Black panels
- Phantom Rear Bumper
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- 2 - 10 In. Single Row LED Light Mounts
- Parking Sensor Cutouts
- Made with plate steel and constructed in a modern box design, the Phantom TRX Rear Bumper provides superior protection over the factory option. It's designed to flow with the truck's rear body style, and its wings flare out in a unique hammerhead style. The factory dual exhaust and tow hooks fit comfortably below the bumper, and sensor cutouts retain full functionality of the parking/backup warning system. Towards each end of the bumper are mounting points for a pair of 10-inch SR LED light bars set behind satin black aluminum accent panels. As always, this bumper is fully bolt-on and Made in the USA
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Rear | TRX |
Showing 1 - 10 of 48 products
Loading...