2021 Ram 1500 Bumper Parts
Choose your Submodel for your 2021 Ram 1500
Image
Product
Price
- with Single Square Lights Holes; Fits w/o Or with Parking Sensors; Retains Factory Tow Hooks; Non-Winch
- Alumilite Front Bumper; with Single Square Lights Holes; Fits w/o Or with Parking Sensors; Retains Factory Tow Hooks; Non-Winch;
- Alumilite Front Bumper
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Attn: State Of California Consumers Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Bumper Style: Modular
-
Features:
- 1/8 inch External Shell
- 1/4 inch Internal Support and Brackets
- Three Stage Costing Process
- Three Piece Bracket Assembly
- Choice of Round or Square Light Pockets On Most Models
- Available RT
- PR and Grille Guard Series Options On Most Models
- Winch and Non-Winch Models Available
- Shackle Mount Option on Winch Models only
- W/ and W/O Equipped Parking Sensors and Adaptive Cruse Control
- 1 Year Limited Warranty on Finish/Limited Life-Time on Structure
- Add style and options to your 2019-2022 Dodge Ram 1500 with this Alumilite bumper! This aluminum bumper can fit two square 3" cube LED's, like the Baja Designs Squadron, and up to a 40" curved LED light bar, like the Baja Designs OnX6, or a plethora of 3" cubes fit in the center opening. This bumper works with or without front parking sensors and OE tow hooks. The exceedingly tight profile on this bumper is what will make your truck stand out, not to mention this bumper weighs less than 50lbs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ram 1500 | Front |
- Hammer Black; Panel Color Satin Black; w/Winch Mount; w/Parking Sensor Cutouts; Universal Light Mnt. System For 40 in. Light Bar Or 10 Cube Lights
- Stealth Fighter Front Bumper; Hammer Black; Panel Color Satin Black; w/Winch Mount; w/Parking Sensor Cutouts; Universal Light Mnt. System For 40 in. Light Bar Or 10 Cube Lights;
- Stealth Fighter Front Bumper
- Product Attributes:
- Bumper Style: Stealth
-
Features:
- Winch Mount
- Parking Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Universal Mounts Up To 10 Cube Lights Or 40 in. Radius Light Bar
- Mounts For Cube Lights On Sides
- The RAM Rebel has never looked better with the Stealth Fighter front bumper. A radius steel plate design gives your RAM truck added front end protection without all the extra bulk. Matching the RAM Rebel factory body lines, the Stealth Fighter front bumper is a tight fitting steel plate bumper that compliments the RAMs look. A patented universal light mount system allows mounting up to a 40 in. radius LED or 10 cube lights. Mount any combination of brand, size, and style light to give your RAM front bumper the added lighting that you need. Fully bolt-on means there is no cutting or welding required to install the Stealth Fighter front bumper. Reinforced D-Ring mounts provide your truck with added utility to pull through any tough situation, while optional parking sensor cutouts retain your trucks OEM amenities.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 2987 | Front | 6 Cyl 3.0L | Rebel | 182 |
- Hammer Black; Panel Color Satin Black; Mount For Up To 10 Cube Lights Or 40 in. Curved Light Bar
- Stealth Fighter Front Bumper; Hammer Black; Panel Color Satin Black; Mount For Up To 10 Cube Lights Or 40 in. Curved Light Bar;
- Stealth Fighter Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Up To 10 Cube Lights Or 40 in. Light Bar
- Mounts For Cube Lights On Sides
- The Stealth Fighter Front Bumper is a low-profile plate steel design. The radiused front end keeps it tight to the front of your Ram TRX while following key bodylines to make it look like it belongs from the factory. A universal light mount system allows for a 40 in. curved light bar or up to cube lights in the center of the bumper, and there are two additional cube light mounts behind each side panel. A full skid plate comes down and attaches in factory mounting locations to make sure your shock reservoirs remain protected. OEM amenities such as parking sensors and marker lights are retained. Reinforced clevis mounts provide a mounting point for 3/4 in. D-Rings. As always, this product is fully bolt-on and made in America.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 6166 | Front | 8 Cyl 6.2L | TRX | 376 |
- Hammer Black; with Satin Black Panels; Mounts For 4 Rigid 360 6 in.
- Bomber Front Bumper; Hammer Black; with Satin Black Panels; Mounts For 4 Rigid 360 6 in.;
- Bomber Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Transform the front end of your Ram TRX with the Addictive Desert Designs Bomber Ram TRX Front Bumper. The modern plate steel design brings aggressive styling while remaining low-profile. The center of the bumper provides inset mounting points for four Rigid 360 6 in. round lights, while each side panel provides a cube light mounting point. The Bomber does not take away from any of the factory features of the TRX. Accommodations for OEM marker lights and parking sensors are integrated into the TRX bumper design, and the OEM tow hooks remain intact. Addictive Desert Designs leads the industry in fit and finish and this bumper is no exception. The side wings follow the factory fender lines perfectly and the bumper sits almost flush to the front of the vehicle. A full 3/16 in. aluminum skid plate offers superior front end protection without adding unnecessary weight. As always, this product is fully bolt-on and made in America.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 6166 | Front | 8 Cyl 6.2L | TRX | 376 |
- Hammer Black; Bolt-On
- ADD PRO Rear Bumper; Hammer Black; Bolt-On;
- ADD PRO Rear Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Backup Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Cube Lights
- ADD Offroad Ram TRX PRO Bolt-On Rear Bumper brings the same extremely low profile design of the front bumper to the rear of the truck. It was designed to flow flawlessly with the lines of your truck. Manufactured with a tubular steel frame coupled with steel & aluminum plates to provide solid protection to the rear of your truck, while still maximizing ground clearance. There are 2 rear facing cube light mounting points that are protected by the tubular frame. The bumper retains holes for the OEM parking sensors, and also leaves the OEM tow hooks intact. The side wings of the bumper leave room for the factory bed step. As always, this is fully bolt-on and Made in America.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Rear | TRX |
- Hammer Black Powder Coat Finish; 20 In. Light Bar Mount
- Phantom Front Bumper; Hammer Black Powder Coat Finish; 20 In. Light Bar Mount;
- Phantom Front Bumper
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- 20 In. Light Bar Mount
- 2 - 10 In. Single Row LED Light Mounts
- Parking Sensor Cutouts
- Revamp your ride with the Phantom Series TRX Front Bumper. With a sleek, low profile and prerunner inspired design, this bumper will give your ride an instantly upgraded look. Constructed from plate steel for a more enhanced style, the knife's edge design mimics the look of trailing arms. It comes with a lightweight 3/16-inch aluminum skid plate which provides full protection without adding excess weight. The skid also boasts vented cutouts to ensure proper air flow to the intercooler.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 6166 | Front | 8 Cyl 6.2L | TRX | 376 |
- Hammer Black; Panel Color Satin Black; w/Parking Sensor Cutouts; Universal Light Mnt. System For 40 in. Light Bar Or 10 Cube Lights
- Stealth Fighter Front Bumper; Hammer Black; Panel Color Satin Black; w/Parking Sensor Cutouts; Universal Light Mnt. System For 40 in. Light Bar Or 10 Cube Lights;
- Stealth Fighter Front Bumper
- Product Attributes:
- Bumper Style: Stealth
-
Features:
- Parking Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Universal Mounts Up To 10 Cube Lights Or 40 in. Radius Light Bar
- The RAM Rebel has never looked better with the Stealth Fighter front bumper. A radius steel plate design gives your RAM truck added front end protection without all the extra bulk. Matching the RAM Rebel factory body lines, the Stealth Fighter front bumper is a tight fitting steel plate bumper that compliments the RAMs look. A patented universal light mount system allows mounting up to a 40 in. radius LED or 10 cube lights. Mount any combination of brand, size, and style light to give your RAM front bumper the added lighting that you need. Fully bolt-on means there is no cutting or welding required to install the Stealth Fighter front bumper. Reinforced D-Ring mounts provide your truck with added utility to pull through any tough situation, while optional parking sensor cutouts retain your trucks OEM amenities.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 2987 | Front | 6 Cyl 3.0L | Rebel | 182 |
- 2 Stage Black Powder Coated; Pre-Runner Guard
- Vengeance Front Bumper; 2 Stage Black Powder Coated; Pre-Runner Guard;
- Vengeance Front Bumper
- Product Attributes:
- WARNING CA Proposition 65: No
- Bumper Style: Pre-runner
-
Features:
- Light Weight
- Steel Construction
- Integrated 20 in. Light Bar Housing
- Mounting Options For Two 2 in. LED
- Lower Cut Offs For Better Air Flow
- Fits High And Tight
- Fab Fours' new line of light weight bumpers: Vengeance Series. These premium steel bumpers are constructed to be lightweight (Weighing only 75lbs) and offer a sleek and stylish finish for both the front and rear of your vehicle. Center Cutout for 20 in. LED light bar and mounting options on each side for (2) Rigid Industries' Dually's to give you maximum LED light coverage. The fit of this bumper is high and tight and comes with lower cutouts to provide airflow while also giving you that aggressive look both on and off the road. Available in a no guard or pre-runner guard option.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Front | TRX Launch Edition |
- 2 Stage Black Powder Coated; Steel
- Grumper Front Winch Bumper; 2 Stage Black Powder Coated; Steel;
- Grumper Front Winch Bumper
- Product Attributes:
- WARNING CA Proposition 65: No
- Bumper Style: Winch Mount
-
Features:
- Revolutionary Combination Of Both Grille And Winch Bumper
- Provides Greater Tire Clearance
- Strategically Placed Cutouts For Maximum Airflow
- Engineered To Work With Up To A 12000 Lbs Warn Zeon Winch
- Complete Bolt On Installation w/Stainless Steel Hardware
- MADE IN THE USA
- From Concept to Reality…The GRUMPER Truck offers a revolutionary combination of both grille and w in. bumper. Fully Customizable with removable inserts, this aggressive yet sophisticated piece is sure to change the way we look at bumpers going forward for the Dodge 1500. **US PATENTED**
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Front | TRX Launch Edition |
- Hammer Black Powder Coat Finish; Two 10 In. Single Row LED Light Mounts
- Phantom Rear Bumper; Hammer Black Powder Coat Finish; Two 10 In. Single Row LED Light Mounts;
- Phantom Rear Bumper
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- 2 - 10 In. Single Row LED Light Mounts
- Parking Sensor Cutouts
- The Ram TRX Phantom Rear Bumper is the perfect way to bring added style and protection to your truck. At ADD Offroad, we believe in products that combine longevity and aesthetic appeal, so you can trust this rugged, plate steel bumper won't let you down. The modern box design is subtle yet sophisticated, giving a streamlined look that works to emphasize the unique hammerhead style of the bumper's sides. The factory dual exhaust and tow hooks fit comfortably under the bumper, and sensor cutouts mean you retain all of your parking/backup system functions.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Rear | TRX |
Showing 1 - 10 of 48 products
Loading...