2004 Ford E 350 Club Wagon Differential Parts

Choose your Engine for your 2004 Ford E-350 Club Wagon


Showing 1 - 7 of 7 products
Image
SKU
Product
Rating
Price

Eaton
  • 31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.
  • Detroit Truetrac® Differential; 31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.;
  • Detroit Truetrac® Differential
  • Features:
    • Helical Gear Limited Slip Differential
    • Optimized Torque Bias Ratios Deliver Max Acceleration And Handling
    • Automatic Engagement
    • Works In Forward And Reverse
    • Ideal For Most Vehicles
    • Durable
    • Smooth
    • Quiet Operation
    • No Special Lubrication Or Friction Modifiers Needed
  • The Detroit Truetrac is a helical-gear style, limited-slip differential that maximizes wheel traction and enhances driving characteristics. Maintenance-free, it features smooth, automatic operation in forward and reverse. Its versatility makes Detroit Truetrac the ideal traction solution for almost any type of vehicle.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Ford E-350 Club Wagon V - Rear 8 Cyl 6.0L 363

Eaton
  • 35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.
  • Detroit Truetrac® Differential; 35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.;
  • Detroit Truetrac® Differential
  • Features:
    • Helical Gear Limited Slip Differential
    • Optimized Torque Bias Ratios Deliver Max Acceleration And Handling
    • Automatic Engagement
    • Works In Forward And Reverse
    • Ideal For Most Vehicles
    • Durable
    • Smooth
    • Quiet Operation
    • No Special Lubrication Or Friction Modifiers Needed
  • The Detroit Truetrac is a helical-gear style, limited-slip differential that maximizes wheel traction and enhances driving characteristics. Maintenance-free, it features smooth, automatic operation in forward and reverse. Its versatility makes Detroit Truetrac the ideal traction solution for almost any type of vehicle.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Ford E-350 Club Wagon V - Rear 8 Cyl 6.0L 363

Eaton
  • 34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.
  • Detroit Truetrac® Differential; 34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.;
  • Detroit Truetrac® Differential
  • Features:
    • Helical Gear Limited Slip Differential
    • Optimized Torque Bias Ratios Deliver Max Acceleration And Handling
    • Automatic Engagement
    • Works In Forward And Reverse
    • Ideal For Most Vehicles
    • Durable
    • Smooth
    • Quiet Operation
    • No Special Lubrication Or Friction Modifiers Needed
  • The Detroit Truetrac is a helical-gear style, limited-slip differential that maximizes wheel traction and enhances driving characteristics. Maintenance-free, it features smooth, automatic operation in forward and reverse. Its versatility makes Detroit Truetrac the ideal traction solution for almost any type of vehicle.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Ford E-350 Club Wagon V - Rear 8 Cyl 6.0L 363

Eaton
  • Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter
  • Eaton Elocker™ Differential; Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter;
  • Eaton Elocker™ Differential
  • Features:
    • Electromagnetic Locking Differential
    • Driver controlled push-button operation
    • Most Reliable On-Demand Differential
    • 4 Pinion Net-Forged Gear Design For Max Strength And Durability
    • Eaton NGR locking rocker switch and wiring harness included
    • Direct Acting Operation Remains Locked Forward And Reverse
  • The Eaton ELocker is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a dash switch, drivers can go from open to 100-percent locked. A second flip of the switch deactivates the unit to resume normal driving. The direct acting mechanism activates in .14 second to provide 100% instant axle lock, and remains locked in both forward and reverse.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Ford E-350 Club Wagon V - Front 8 Cyl 6.0L 363

Auburn Gear
  • Auburn Gear Ected Max Differential
  • Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down
  • Auburn Gear Ected Max Differential; Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down;
  • Auburn Gear Ected Max
  • Features:
    • Selectable Full Locker And Limited Slip In One Unit
    • Can Be Engaged/Disengaged At Any Reasonable Speed
    • Smooth Quiet Operation
    • Can Be Use With Or Without Lockout Hubs
    • Made From 9310 Heat Treated Billet Steel
    • Backed By 1 Year Warranty
    • Covered w/4 Year Differential-Replacement Exchange
    • Made In The USA
  • The ECTED Max is a selectable traction device; an on/off switch is mounted near the driver. When off–the clutch pack,located behind the side gear provides the limited slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed and thereby providing bias torque to the high traction wheel–your performance limited slip differential action. When selected on, current is sent to the electromagnetic coil. The coil is retained by a clip that fits over one of the bearing cap bolts, making it non-rotational. The coil rides on a ball bearing. The ball bearings spin with the differential case. The coil creates a magnetic flux so that the pilot cone is pulled into engagement with the differential case. This frictional engagement causes the bearing balls to ride up on a ramp machined into the side gear. This radial travel of the balls also causes lateral movement of the side gear. This applies a force onto the center block. The center block has an elongated hole that the center pin fits through, allowing it to float. The center block applies force to the opposite side gear, compressing the clutch pack giving the user a solid axle assembly–the spool/locker performance you desire at the strip/off-road. ECTED Max gearing is made from aircraft quality, 9310 heat-treated billet steel. Tough as nails! ECTED Max can be switched on or off on the fly, at any road speed. ECTED Max does not have any shift forks or pins that must be lined up to obtain locker mode. ECTED Max is quiet. Good-bye to noisy lockers! ECTED Max is backed by industry-leading 1 year warranty, like all Auburn Gear Performance Differentials. ECTED Max is backed by the industry-exclusive program. D-REX=Differential–Replacement EXchange Program. ECTED Max can be used in front axle applications–with or w/out lockout hubs. ECTED Max is the only selectable locker offering both limited slip and locker modes. Forget the rest-go with the best!

Additional Fitment Information:
Vehicle Position
2004 - Ford E-350 Club Wagon Rear

Yukon Gear
  • Dana 60 4.56/Up Dura Grip Positraction; Narrow; 32spl; ABS Compatible
  • Dana 60 Rear; 32 spline; Full Float Axle. 4.56 and Up Ratio~Yukon Dura Grip Positraction; Dana 60 Rear; 32 spline; Full Float Axle. 4.56 and Up Ratio
  • Dana 60 4.56/Up Yukon Dura Grip Positraction; Narrow; 32 Spline; Antilock Brake System Compatible; Fits Front or Full Float Rear Applications; Not Compatible with C-Clip Rear Axles; 4 Pinion Design
  • Dura Grip Positraction
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
  • Features:
    • Fits Dana Spicer 60 w/32 Spline Axles
    • Fits 4.56 Gear Ratio Up
    • Fully Rebuildable Design And Proudly Assembled In The USA
    • Limited Slip Differential w/Composite Clutches
    • All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
    • Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
    • Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
    • 4 Pinion Design
  • Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Ford E-350 Club Wagon V - Rear 8 Cyl 6.0L 363

Yukon Gear
  • Dana 60 4.56/Up Dura Grip Positraction; Narrow; 32spl; ABS Compatible
  • Dana 60 Rear; 32 spline; Full Float Axle. 4.56 and Up Ratio~Yukon Dura Grip Positraction; Dana 60 Rear; 32 spline; Full Float Axle. 4.56 and Up Ratio
  • Dana 60 4.56/Up Yukon Dura Grip Positraction; Narrow; 32 Spline; Antilock Brake System Compatible; Fits Front or Full Float Rear Applications; Not Compatible with C-Clip Rear Axles; 4 Pinion Design
  • Dura Grip Positraction
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
  • Features:
    • Fits Dana Spicer 60 w/32 Spline Axles
    • Fits 4.56 Gear Ratio Up
    • Fully Rebuildable Design And Proudly Assembled In The USA
    • Limited Slip Differential w/Composite Clutches
    • All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
    • Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
    • Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
    • 4 Pinion Design
  • Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Ford E-350 Club Wagon V - Rear 8 Cyl 5.4L 330
Showing 1 - 7 of 7 products

Loading...