Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Models made in Japan.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation on vehicles with ABS to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the factory service information or check with your local dealer.
- Rear
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Models made in Great Britain.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation on vehicles with ABS to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the factory service information or check with your local dealer.
- Rear
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation on vehicles with ABS to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the factory service information or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Front |
- KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard.
- Kugel With C-Clip
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Core made of high tensile, heat-treatable AISI 1065 high-carbon steel
- Assembly is precision processed and pre-coated with anti-corrosion lubricant, it not only makes lubricating the bearings easy, but also helps prevent corrosion of the hub
This Part Fits the Following OEM/Substitute Numbers:
511029, GRW38, H511029
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Rear |
- KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard.
- Kugel With C-Clip
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Core made of high tensile, heat-treatable AISI 1065 high-carbon steel
- Assembly is precision processed and pre-coated with anti-corrosion lubricant, it not only makes lubricating the bearings easy, but also helps prevent corrosion of the hub
This Part Fits the Following OEM/Substitute Numbers:
510074, FW38, H510074
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G-Coating avoids corrosion
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Genius Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included)
- Kit variations : KBB-100166 KBB-101003 KBB-101096 KBB-101183 KBB-101383 KBB-101982 KBB-102317 KBB-102672 KBB-117720 KBB-118328 KBB-118747
This Part Fits the Following OEM/Substitute Numbers:
120.40057, 121.40057, 126054, 248880060, 248880317, 31347, 31381, 48880060, 48880317, 510074, 748880060, 748880317, 7795, 7844, 901080, 914, 980060, 980317...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Ceramic CMX Brake Pad Set (Hardware Included) + 2x Rear Coated Drilled Slott
- Kit variations : KBB-106476 KBB-106877 KBB-107295 KBB-107424 KBB-107514 KBB-107613 KBB-107932 KBB-108275 KBB-108634 KBB-117389 KBB-118464
This Part Fits the Following OEM/Substitute Numbers:
1086, 120.40057, 120.40063, 121.40057, 121.40063, 126054, 126352, 2164621, 2164625, 248880060, 248880294, 248880317, 248881041, 2488811008, 31347, 31372, 31381, 48880060...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Front and Rear |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G-Coating avoids corrosion
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Genius Disc Brake Rotor (Both Side) + 1x Front Ceramic CMX Brake Pad Set (Hardware Included) + 2x Rear Coated Genius Disc Brake Rotor (Both
- Kit variations : KBB-106476 KBB-106877 KBB-107295 KBB-107424 KBB-107514 KBB-107613 KBB-107932 KBB-108275 KBB-108634 KBB-117389 KBB-117778
This Part Fits the Following OEM/Substitute Numbers:
1086, 120.40057, 120.40063, 121.40057, 121.40063, 126054, 126352, 248880060, 248880294, 248880317, 248881041, 2488811008, 31347, 31372, 31381, 48880060, 48880294, 48880317...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Front and Rear |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic CMX Brake Pad Set (Hardware Included)
- Kit variations : KBB-100166 KBB-101003 KBB-101096 KBB-101183 KBB-101383 KBB-101688 KBB-101982 KBB-102317 KBB-102672 KBB-117720 KBB-118328
This Part Fits the Following OEM/Substitute Numbers:
120.40057, 121.40057, 126054, 248880060, 248880317, 31347, 31381, 48880060, 48880317, 510074, 748880060, 748880317, 7795, 7844, 901080, 914, 980060, 980317...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G-Coating avoids corrosion
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Genius Disc Brake Rotor (Both Side) + 1x Front Ceramic CMX Brake Pad Set (Hardware Included)
- Kit variations : KBB-100166 KBB-101003 KBB-101096 KBB-101183 KBB-101383 KBB-101688 KBB-101982 KBB-102317 KBB-102672 KBB-117720 KBB-118747
This Part Fits the Following OEM/Substitute Numbers:
120.40057, 121.40057, 126054, 248880060, 248880317, 31347, 31381, 48880060, 48880317, 510074, 748880060, 748880317, 7795, 7844, 901080, 914, 980060, 980317...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Honda CR-V | Front |
Showing 1 - 10 of 40 products
Loading...