2008 Jeep Wrangler Drive Axle Shaft Parts
Choose your Submodel for your 2008 Jeep Wrangler
Image
Product
Price
- For Use w/Dana 30
- Axle Shaft; For Use w/Dana 30;
- Axle Shaft
- Product Attributes:
- Axle Type: Dana 30
-
Features:
- Axle Shaft
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Front Left |
- Includes Retainer/Bearing/Seal And Ring; w/Tru-Lok Differential; For Use w/Dana 44
- Axle Shaft; Includes Retainer/Bearing/Seal And Ring; w/Tru-Lok Differential; For Use w/Dana 44;
- Axle Shaft
- Product Attributes:
- Axle Type: Dana 44
-
Features:
- Axle Shaft
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Rear Left |
- w/Tru-Lok Differential; For Use w/Dana 44
- Axle Shaft; w/Tru-Lok Differential; For Use w/Dana 44;
- Axle Shaft
- Product Attributes:
- Axle Type: Dana 44
-
Features:
- Axle Shaft
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Rear Right |
- Includes Retainer/Bearing/Seal And Ring; w/Standard And Trac-Lok Differential; For Use w/Dana 44
- Axle Shaft; Includes Retainer/Bearing/Seal And Ring; w/Standard And Trac-Lok Differential; For Use w/Dana 44;
- Axle Shaft
- Product Attributes:
- Axle Type: Dana 44
-
Features:
- Axle Shaft
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Rear |
- For Use w/Dana 30
- Axle Shaft; For Use w/Dana 30;
- Axle Shaft
- Product Attributes:
- Axle Type: Dana 30
-
Features:
- Axle Shaft
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Front Right |
- AXLE SHAFT DANA 44 JK NON RUBICON
- with 226mm Axle with Axle Shaft Assembly with Axle Bearing and Seal
- FSGR
- Product Attributes:
- Location: Lh/rh
- Quantity: 1
- Axle Length (In): 31.890
- Axle Model: Dana S44
- Outer Axle Included: Y
- Wheel Stud Hole Diameter (In): 0.645
- Wheel Bearing Included: Y
- Wheel Nuts Included: N
- Bolt Pattern: 5 X 5.00
- ABS Tone Ring Included: Yes
- Number Of Wheel Lugs: 5
- Bearing Pilot Diameter (In): 1.563
- Wheel Studs Included: Y
- Axle Shaft Included: Y
- Spline Count: 30 Inboard
- Axle Spline Count: 30 Inboard
- Material: Steel
- Axle Type: Complete Assembly
- Retainer Ring Included: Y
- Axle Length (Mm): 810.006
- Brake Pilot Diameter (In): 2.833
- ABS/Non-ABS: Abs
- ABS Sensor Ring Installed: Y
- Seal Kit Included: N
- Full-Floating Or Semi-Floating: Semi-floating
- Includes Tone: Y
- Seal Included: Y
- Inner Axle Included: Y
- U-Joint Included: N
- Wheel Bolt Prep Kit Included: N
-
Features:
- Genuine OE quality. Tested and proven.
- Precision manufacturing processes
- Engineered for consistent quality and durability
- Heat-treated for optimal hardness and durability
- The upgrades made to these Dana 30 and Dana 44 axle shafts deliver optimal performance with larger tires and off-road use. They also offer a wide range of advantages for Jeep drivers everywhere.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Rear |
- DANA FRONT AXLE SHAFT
- New Design with Dana Super 30 Front Axle with Upgraded 1350 Series Design
- FSGR
- Product Attributes:
- Axle Type: Complete Assembly
- Includes Universal Joint: Y
- Universal Joint Series: 1350
- Outer Stub Spline Count: 32
- Inner Shaft Length (In): 34.500
- Outer Stub Length (In): 6.330
- Axle Model: Dana 30
- Overall Assembled Length (In): 40.830
- Inner Shaft Spline: 27
- Material: Steel
- Includes Tone: N
-
Features:
- Genuine OE quality. Tested and proven.
- Precision manufacturing processes
- Engineered with OE Quality Materials for consistent durability and performance
- Heat-treated for optimal hardness and durability
- These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Jeep Wrangler | Front Right | Sahara |
- AXLE SHAFT DANA 44 JK NON RUBICON
- with 226mm Axle with Axle Shaft Assembly with Axle Bearing and Seal
- FSGR
- Product Attributes:
- Location: Lh/rh
- Quantity: 1
- Axle Length (In): 31.890
- Axle Model: Dana S44
- Outer Axle Included: Y
- Wheel Stud Hole Diameter (In): 0.645
- Wheel Bearing Included: Y
- Wheel Nuts Included: N
- Bolt Pattern: 5 X 5.00
- ABS Tone Ring Included: Yes
- Number Of Wheel Lugs: 5
- Bearing Pilot Diameter (In): 1.563
- Wheel Studs Included: Y
- Axle Shaft Included: Y
- Spline Count: 30 Inboard
- Axle Spline Count: 30 Inboard
- Material: Steel
- Axle Type: Complete Assembly
- Retainer Ring Included: Y
- Axle Length (Mm): 810.006
- Brake Pilot Diameter (In): 2.833
- ABS/Non-ABS: Abs
- ABS Sensor Ring Installed: Y
- Seal Kit Included: N
- Full-Floating Or Semi-Floating: Semi-floating
- Includes Tone: Y
- Seal Included: Y
- Inner Axle Included: Y
- U-Joint Included: N
- Wheel Bolt Prep Kit Included: N
-
Features:
- Genuine OE quality. Tested and proven.
- Precision manufacturing processes
- Engineered for consistent quality and durability
- Heat-treated for optimal hardness and durability
- The upgrades made to these Dana 30 and Dana 44 axle shafts deliver optimal performance with larger tires and off-road use. They also offer a wide range of advantages for Jeep drivers everywhere.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
48003272AA, 630-338, 68003272AA
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Rear |
- DANA FRONT AXLE SHAFT
- with Dana 30 Axle with Upgraded 1350 Series Design
- FSGR
- Product Attributes:
- Axle Type: Complete Assembly
- Includes Universal Joint: Y
- Universal Joint Series: 1350
- Outer Stub Spline Count: 32
- Inner Shaft Length (In): 34.500
- Outer Stub Length (In): 6.330
- Axle Model: Dana 30
- Overall Assembled Length (In): 40.830
- Inner Shaft Spline: 27
- Material: Steel
- Includes Tone: N
-
Features:
- Genuine OE quality. Tested and proven.
- Precision manufacturing processes
- Engineered with OE Quality Materials for consistent durability and performance
- Heat-treated for optimal hardness and durability
- These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.
This Part Fits the Following OEM/Substitute Numbers:
2006481-2, 630428, 68004080AA, 68145054AA, DS20146162
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Front Right |
- DANA FRONT AXLE SHAFT
- with Dana 44 Axle with Upgraded 1350 Series Design
- FSGR
- Product Attributes:
- Axle Type: Complete Assembly
- Includes Universal Joint: Y
- Universal Joint Series: 1350
- Outer Stub Spline Count: 32
- Inner Shaft Length (In): 34.500
- Outer Stub Length (In): 6.330
- Axle Model: Dana 30
- Overall Assembled Length (In): 40.830
- Inner Shaft Spline: 27
- Material: Steel
- Includes Tone: N
-
Features:
- Genuine OE quality. Tested and proven.
- Precision manufacturing processes
- Engineered with OE Quality Materials for consistent durability and performance
- Heat-treated for optimal hardness and durability
- These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Jeep Wrangler | Front Right |
Showing 1 - 10 of 26 products
Loading...