2018 Jeep Wrangler JK Drive Shaft Parts
Choose your Submodel for your 2018 Jeep Wrangler JK
Image
Product
Price
- Steel
- Drive Shaft; Front; Steel;
- Drive Shaft
- Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
- Horsepower Rating: Oem
-
Features:
- Heavy Duty Replacement Driveshafts For Maximum
- Driveline Reliability
- Guarantee Superior Performance And Functionality
- This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2018 - Jeep Wrangler JK | V | 3604 | Front | 6 Cyl 3.6L | Unlimited Sport | 220 |
- Front
- CV Drive Shaft; Front;
- CV Drive Shaft
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Collapsed Measurement 35.5 in.
- Extended Measurement 38 in.
- Eliminates Contact Between The Stock Drive Shaft And Oil Pan On Automatic Transmission Models
- Includes Brute Force Red Seals
- Includes Better Quality CV Joints
- Shaft Strength Is Twice As Strong As The Factory Equipped Drive Shaft
- Grease Fittings Are Out Of The Way Of The Transmission Oil Pan
- Meaning You Get Grease To The Joints That Need It And Not All Over The Bottom Of Your Jeep
- After Lifting Your Jeep Jk Wrangler A Cv [Double Cardan] Drive Shaft
- Is A Good Choice To Eliminate Vibration Issues And Provide The Longest Lasting Drive Shaft
- This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Jeep Wrangler JK |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Transmission | Position | Sub Model |
|---|---|---|---|
| 2018 - Jeep Wrangler JK | Automatic | Front | Unlimited Willys Wheeler |
- For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Fits Dana 30 and Dana 44 Front Axles Install Time 2-3 Hours
- CV Drive Shaft; Front; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Fits Dana 30 and Dana 44 Front Axles;
- CV Drive Shaft
- Product Attributes:
- Usage: Off-road
- WARNING CA Proposition 65: No
- Horsepower Rating: Oem
-
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Eliminates Contact Between The Stock Drive Shaft And Oil Pan
- On Automatic Transmission Models
- Good Choice To Eliminate Vibration Issues
- Includes Brute Force Red Seals
- Includes Better Quality CV Joints
- Shaft Strength Is Twice As Strong As The Factory Drive Shaft
- Grease Fittings Are Out Of Way Of The Transmission Oil Pan
- This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard in.off the shelf in. mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Wrangler JK | Front | Unlimited Sport |
- For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 22.875 in.; Extended Length 26.375 in. Install Time 2-3 Hours
- CV Drive Shaft; Rear; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 22.875 in.; Extended Length 26.375 in.;
- CV Drive Shaft
- Product Attributes:
- Position: Rear
- Usage: Oem
- WARNING CA Proposition 65: No
- Horsepower Rating: Oem
- Material: Oem
-
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Good Choice To Eliminate Vibration Issues
- Includes Brute Force Red Seals
- Includes Better Quality CV Joints
- Shaft Strength Is Twice As Strong As The Factory Drive Shaft
- Grease Fittings Are Out Of Way Of The Transmission Oil Pan
- This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Wrangler JK | Rear | Rubicon |
- For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 41.25 in.; Extended Length 44.75 in. Install Time 2-3 Hours
- CV Drive Shaft; Rear; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 41.25 in.; Extended Length 44.75 in.;
- CV Drive Shaft
- Product Attributes:
- Position: Rear
- Usage: Oem
- WARNING CA Proposition 65: No
- Horsepower Rating: Oem
- Material: Oem
-
Features:
- Collapsed Length: 41.25 in.
- Extended Length: 44.75 in.
- Good Choice To Eliminate Vibration Issues
- Includes Brute Force Red Seals
- Includes Better Quality CV Joints
- Shaft Strength Is Twice As Strong As The Factory Drive Shaft
- Grease Fittings Are Out Of Way Of The Transmission Oil Pan
- This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Wrangler JK | Rear | Unlimited Sport |
Showing 1 - 6 of 6 products
Loading...