Image
Product
Price
- High-Torque Starter; Gear Reduction Type; 1.4KW; Fits Pontiac And Oldsmobile V8
- High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:166-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- High-Torque Mini Starter; Gear Reduction Type; 1.4KW; Fits All Pontiac and Oldsmobile V8 Engines; Billet Aluminum Mount; For 11.1:1 Compression Ratio Engines; 100% New; Offset Design for More Oil Pan Clearance; Black Finish; Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Category: High-torque Starter
- Power Output: 1.4 Kw
- Feature/Benefit: High-torque, Gear-reduction Design.
- Applications: Pontiac And Oldsmobile Engines
- Compression Ratio: 11 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 166-tooth
- Make: Gm
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | V | 5733 | 8 Cyl 5.7L | 350 |
- High-Torque Starter; Gear Reduction; High Compression; Pontiac/Oldsmobile V8
- High-Torque Starter; Gear Reduction; High Compression; Compression Ratio:14 : 1; Finish:Natural; Flywheel Tooth Number:166-Tooth; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- High-Torque Mini Starter; Gear Reduction Type; High Compression Racing Style; Fits All Early Model Pontiac/Oldsmobile V8 Engines; For 14.0:1 Compression Ratio; 100% New; Offset For Pan Clearance; Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 4.41:1
- Category: Starters
- Power Output: 1.4 Kw
- Applications: Pontiac And Oldsmobile Engines
- Compression Ratio: 14 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 166-tooth
- Make: Gm
- For engines with large cubic inches or compression ratios, these 100% NEW starters provide the gear reduction needed to get large engines turned over. Built from scratch with all-new components, the torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to 14:1 compression. Mounting bolts and adjustment shims included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | V | 5733 | 8 Cyl 5.7L | 350 |
- 168 Tooth Flywheel; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.25:1 Gear Reduction; InfiClock System; Black Wrinkle Finish
- Mastertorque Starter; 168 Tooth Flywheel; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.25:1 Gear Reduction; InfiClock System; Black Wrinkle Finish;
- Mastertorque Starter
- Product Attributes:
- Style: Oe
-
Features:
- Clears Most Headers and Oil Pans
- No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
- Durable Black Wrinkle Finish
- Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
- InfiCLOCK Standard On Many Applications
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Mastertorque Starters Are Rated Up to 14:1 Compression With A 3.25:1 Gear Reduction And Up to 1.8HP Producing 180 Ft-Lbs of Cranking Torque. The Mastertorque Starters Feature A Durable Black Wrinkle Finish. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | L | - | 6 Cyl 4.1L | 250 |
- 168 Tooth Flywheel; 250 ft./lb. Torque; 18:1 Compression Rate; 4.5:1 Gear Reduction; Staggered Mount; Natural Finish
- Ultra Torque Starter; 168 Tooth Flywheel; 250 ft./lb. Torque; 18:1 Compression Rate; 4.5:1 Gear Reduction; Staggered Mount; Natural Finish;
- Ultra Torque Starter
- Product Attributes:
- Style: Chevrolet
-
Features:
- 2.5 KW/3.4 HP
- Up to 18:1 Compression
- Clears Most Headers and Oil Pans
- Solenoid Up only
- 3 Position Rotation
- Great for Big Cubic Inch Engines
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Ultra Torque Starter Are Rated Up To 18:1 Compression With 250 Ft-Lbs of Cranking Torque. With 3.4HP and a 4.4:1 Gear Reduction These Starter Can Keep Up With The Most Demanding Engines. 3 Position Rotation Billet Aluminum Mounting Block. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | L | - | 6 Cyl 4.1L | 250 |
- Standard; 168 Tooth Flywheel; 200 ft./lb. Torque; 18:1 Compression Ratio; 4.4-1 Gear Reduction; Straight Mount
- XS Torque Starter; Standard; 168 Tooth Flywheel; 200 ft./lb. Torque; 18:1 Compression Ratio; 4.4-1 Gear Reduction; Straight Mount;
- XS Torque Starter
- Product Attributes:
- Style: Oe
-
Features:
- Clears Most Headers and Oil Pans
- No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
- Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
- The Lightest 200ft.lb Starter Available
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster XS Torque Starters Are Rated Up to 18:1 Compression With A 4.4:1 Gear Reduction And Up to 1.8HP. The XS Torque Is The Lightest 200 Ft-Lbs Of Torque Starter. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | L | - | 6 Cyl 4.1L | 250 |
- 158/168 Tooth Flywheel; 180 ft./lbs. Torque; 14.1 Compression Rate; Straight Mount; Denso Style
- Mastertorque Starter; 158/168 Tooth Flywheel; 180 ft./lbs. Torque; 14.1 Compression Rate; Straight Mount; Denso Style;
- Mastertorque Starter
- Product Attributes:
- Style: Oe
-
Features:
- Clears Most Headers and Oil Pans
- No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
- Durable Black Wrinkle Finish
- Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Mastertorque Starters Are Rated Up to 14:1 Compression With A 3.25:1 Gear Reduction And Up to 1.8HP Producing 180 Ft-Lbs of Cranking Torque. The Mastertorque Starters Feature A Durable Black Wrinkle Finish. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | V | 5733 | 8 Cyl 5.7L | 350 |
- Standard; 153/168 Tooth Flywheel; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.7-1 Gear Reduction; Straight Mount
- PowerMax Plus Starter; Standard; 153/168 Tooth Flywheel; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.7-1 Gear Reduction; Straight Mount;
- PowerMax Plus Starter
- Product Attributes:
- Style: Oe
-
Features:
- Hitachi Style PP106 Replacement
- Clears Most Headers and Oil Pans
- Can Be Inverted w/Solenoid Down
- 4 Position Rotation
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster PowerMAX Plus Starter. PP106 Hitachi Style Replacement. 1.4kw/1.9HP Rated up to 14:1 Compression with 170 Ft-Lbs of Cranking Torque and a 3.7:1 Gear Reduction. Billet Aluminum Mounting Block with 4 Position Rotation. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | V | 5733 | 8 Cyl 5.7L | 350 |
- Standard; 153/168 Tooth Flywheel; 250 ft./lbs Torque; 18:1 Compression Rate; 4.4:1 Gear Reduction; Straight Mount
- Ultra Torque Starter; Standard; 153/168 Tooth Flywheel; 250 ft./lbs Torque; 18:1 Compression Rate; 4.4:1 Gear Reduction; Straight Mount;
- Ultra Torque Starter
- Product Attributes:
- Style: Oe
-
Features:
- 2.5 KW/3.4 HP
- Up to 18:1 Compression
- Clears Most Headers and Oil Pans
- Can Be Inverted w/Solenoid Down
- 4 Position Rotation
- Great for Big Cubic Inch Engines
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Ultra Torque Starter Are Rated Up To 18:1 Compression With 250 Ft-Lbs of Cranking Torque. With 3.4HP and a 4.4:1 Gear Reduction These Starter Can Keep Up With The Most Demanding Engines. 4 Position Rotation Billet Aluminum Mounting Block. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | V | 5733 | 8 Cyl 5.7L | 350 |
- 153/168 Tooth Flywheel; 190 ft./lb. Torque; 16:1 Compression Ratio; 3.7-1 Gear Reduction; Straight Mount; Natural Finish
- PowerMax Plus Starter; 153/168 Tooth Flywheel; 190 ft./lb. Torque; 16:1 Compression Ratio; 3.7-1 Gear Reduction; Straight Mount; Natural Finish;
- PowerMax Plus Starter
- Product Attributes:
- Style: Oe
-
Features:
- Hitachi Style PE106 Replacement
- Clears Most Headers and Oil Pans
- Can Be Inverted w/Solenoid Down
- 4 Position Rotation
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster PowerMAX Plus Starter. PE106 Hitachi Style Replacement. 1.8kw/2.5HP Rated up to 16:1 Compression with 180 Ft-Lbs of Cranking Torque and a 3.7:1 Gear Reduction. Billet Aluminum Mounting Block with 4 Position Rotation. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | V | 5733 | 8 Cyl 5.7L | 350 |
- 95 ft./lbs. Torque; 10:1 Compression Ratio; Natural Finish
- Original Look Starter; 95 ft./lbs. Torque; 10:1 Compression Ratio; Natural Finish;
- Original Look Starter
- Product Attributes:
- Style: Pontiac/oldsmobile 326-455
-
Features:
- Big Armature
- Big Field Coil
- Hi-Temp Solenoid
- Stronger Drive
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Original Look Hi-Torque starter for OE look with Upgraded Modern Technology and Performance. Same on the Outside- Better on the Inside. Stronger Armature/Field Coil/Drive and Hi-Temp Solenoid. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Pontiac Ventura | V | - | 8 Cyl 4.3L | 260 |
Showing 1 - 10 of 16 products
Loading...