2020 Ram ProMaster 2500 Trailer Connector Kit Parts
Image
Product
Price
- 10ft. Custom Wiring Extension Harness (Adds 7-Way RV Blade to Truck Bed)
- 7 Way; 10 ft.; For 5th Wheel or Gooseneck In Bed Connection
- CURT 56000 10-Foot Vehicle-Side Truck Bed 7-Pin Trailer Wiring Harness Extension; Select Chevrolet; Dodge; Ford; GMC; Nissan; Ram; Toyota
- Custom Wiring Harness Extension
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Install Time: 45 Minutes
-
Features:
- Routes A 7-Way Into Truck Bed While Retaining Use Of Rear Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- Allows For Easy Connection Of 5Th Wheel Or Gooseneck Wiring
- 7-Way Connects Tail Brake Reverse Turn Signals Brakes
- 10 ft. Extension w/Right-Angle Plug For Easy Installation
- Spring-Loaded Dust Cover Keeps Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- There is nothing like the luxury and power that go along with heavy-duty towing. 5th wheel RVs offer a deluxe, home-away-from-home experience unlike any other, while gooseneck trailers possess a strength that far surpasses most other trailer options. As with any trailer, however, 5th wheels and goosenecks must be equipped with the proper lighting and electrical systems, and tend to require even more complex connectors than a standard receiver-type trailer setup. Make things simple with a CURT 5th wheel / gooseneck extension harness. These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. This CURT extension harness is designed to work with 7-way RV blade connectors and comes in a length of 10. It is compatible with certain models of Chevrolet, Dodge, Ford, GMC, Nissan, Ram and Toyota (see application to verify fitment). When you need a towing electrical solution that allows you to switch back and forth between your receiver hitch and specialized trailer hitch, CURT gets you plugged in.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- 7ft. Custom Wiring Extension Harness (Adds 7-Way RV Blade to Truck Bed; Packaged
- 7 Way; 7 ft.; For 5th Wheel or Gooseneck In Bed Connection; Packaged
- CURT 56070 7-Foot Vehicle-Side Truck Bed 7-Pin Trailer Wiring Harness Extension; Select Chevrolet; Dodge; Ford; GMC; Nissan; Ram; Toyota
- Custom Wiring Harness Extension
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Install Time: 45 Minutes
-
Features:
- Routes A 7-Way Into Truck Bed While Retaining Use Of Rear Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- Allows For Easy Connection Of 5Th Wheel Or Gooseneck Wiring
- 7-Way Connects Tail Brake Reverse Turn Signals Brakes
- 7 ft. Extension w/Right-Angle Plug For Easy Installation
- Spring-Loaded Dust Cover Keeps Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- There is nothing like the luxury and power that go along with heavy-duty towing. 5th wheel RVs offer a deluxe, home-away-from-home experience unlike any other, while gooseneck trailers possess a strength that far surpasses most other trailer options. As with any trailer, however, 5th wheels and goosenecks must be equipped with the proper lighting and electrical systems, and tend to require even more complex connectors than a standard receiver-type trailer setup. Make things simple with a CURT 5th wheel / gooseneck extension harness. These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. This CURT extension harness is designed to work with 7-way RV blade connectors and comes in a length of 7. It is compatible with a certain models of Chevrolet, Dodge, Ford, GMC, Nissan, Ram and Toyota (see application to verify fitment). When you need a towing electrical solution that allows you to switch back and forth between your receiver hitch and specialized trailer hitch, CURT gets you plugged in.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- 4-Way Flat Output
- CURT 56478 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Ram ProMaster 1500; 2500; 3500
- Custom Wiring Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Plugs Into Vehicle Tail Light To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights Brake Lights Turn Signals
- Equipped w/Powered Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Ram ProMaster 1500, 2500 and 3500 (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- Plug-In Simple® Endurance™ Multi-Tow® 7-Blade And 4-Flat Connector
- Traditional 4 Hole Mount; 3 Year Warranty w/Tow Package
- Plug-In Simple® Endurance™ Multi-Tow® 7-Blade And 4-Flat Connector; Traditional 4 Hole Mount; 3 Year Warranty;
- Plug-In Simple(R) Endurance(TM) Multi-Tow(R) 7-Blade And 4-Flat Connector
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
-
Features:
- Endurance™ Professional Grade
- Plug-In Simple® Wiring Kit
- Utilizes OEM Connectors Create An Exact Fit
- Multi-Tow® Provides Multiple Towing Options From One Connector
- Weatherproof Lid Opens 180 Degrees
- Oversized Hinge Offers Ultimate Durability
- Superior Ergonomics
- 3 Year Warranty From The Date Of Original Purchase
- For Use w/Factory Tow Package
- Impact And Corrosion Resistant
- By incorporating Endurance(TM) design features that include oversized hinges, internal grommets for enhanced weather proofing and a lid that opens 180 degrees, this connector is guaranteed to last for years of trouble free use. Multi-Tow(R) design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!(R) with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing. Four hole mount installation for standard mounting brackets.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- Plug-In Simple® Endurance™ 7-Blade Vehicle To Trailer Wiring Connector
- Traditional 4 Hole Mount; 3 Year Warranty w/Tow Package
- Plug-In Simple® Endurance™ 7-Blade Vehicle To Trailer Wiring Connector; Traditional 4 Hole Mount; 3 Year Warranty;
- Plug-In Simple(R) Endurance(TM) 7-Blade Vehicle To Trailer Wiring Connector
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
-
Features:
- Endurance™ Professional Grade
- Plug-In Simple® Wiring Kit
- Utilizes OEM Connectors Create An Exact Fit
- Corrosion Resistant Terminals
- Weatherproof Lid Opens 180 Degrees
- Oversized Hinge Offers Ultimate Durability
- Superior Ergonomics
- 3 Year Warranty From The Date Of Original Purchase
- By incorporating Endurance(TM) design features that include oversized hinges, internal grommets for enhanced weather proofing and a lid that opens 180 degrees, this connector is guaranteed to last for years of trouble free use. This connector is Plug-In Simple!(R) with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing. Four hole mount installation for standard mounting brackets.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- Plug-In Simple® OE Multi-Tow® 7-Blade And 4-Flat Connector
- w/Tow Package
- Plug-In Simple® OE Multi-Tow® 7-Blade And 4-Flat Connector;
- Plug-In Simple(R) OE Multi-Tow(R) 7-Blade And 4-Flat Connector
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
-
Features:
- Multi-Tow® Provides Multiple Towing Options From One Connector
- Plug-In Simple®/No Cutting/No Splicing/Saves Time
- Utilizes OEM Connectors Create An Exact Fit
- Impact And Corrosion Resistant
- Pre-Greased Terminals For Added Protection
- Includes Step-By-Step Instructions
- Tow more than one trailer? This exact OEM replacement Multi-Tow(R) design features multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!(R) with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- Plug-In Simple® Multi-Tow® 7-Blade And OEM 4-Flat Connector
- Includes Mounting Bracket w/Tow Package
- Plug-In Simple® Multi-Tow® 7-Blade And OEM 4-Flat Connector; Includes Mounting Bracket;
- Plug-In Simple(R) Multi-Tow(R) 7-Blade And OEM 4-Flat Connector
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
-
Features:
- Multi-Tow® Provides Multiple Towing Options From One Connector
- Plug-In Simple® Wiring Kit
- Utilizes OEM Connectors Create An Exact Fit
- Includes Mounting Bracket And Hardware
- Impact And Corrosion Resistant
- Weatherproof Lid
- Pre-Greased Terminals For Added Protection
- Includes Step-By-Step Instructions
- 90 Day Warranty From The Date Of Original Purchase
- Tow more than one trailer? This exact OEM replacement Multi-Tow(R) design features multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!(R) with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- Custom Wiring Harness; 4-Way Flat Output; Select Ram ProMaster 1500; 2500; 3500
- 3-Wire System; 4 Way Flat; Tail Light Circuit 7.5 Amps; Turn And Brake Circuits 7.5 Amps
- CURT 56209 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Ram ProMaster 1500; 2500; 3500
- Custom Wiring Harness
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- WARNING CA Proposition 65: Yes
- Install Time: 45 Minutes
- Turn and Brake Circuits: 7.5 Amp
- Tail Light Circuits: 7.5 Amp
-
Features:
- Plugs Into Tail Light Assembly To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Equipped w/A Powered 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Ram ProMaster 1500, 2500 and 3500 (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- Replacement OE 5-Way Flat Socket (Plugs into USCAR)
- 2-Wire System; 5-Way Flat For Models w/Factory Tow Package
- CURT 56515 Replacement Vehicle-Side 5-Pin Connector; Factory Tow Package and USCAR Socket Required
- Custom Wiring Connector
- Product Attributes:
- Output Type: 5-way Flat
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Existing Vehicle Socket To Provide 5-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 5-Way Flat Connects Tail Lights Brake Lights Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 5-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
- Heavy-Duty Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)
- Plugs Into USCAR Socket For Models w/Factory Tow Package
- CURT 55416 Heavy-Duty Replacement Vehicle-Side RV Blade 7-Pin Connector; Factory Tow Package and USCAR Socket Required
- Heavy Duty Replacement OEM 7-Way RV Blade Socket
- Product Attributes:
- Output Type: 7-way Rv Blade
- WARNING CA Proposition 65: Yes
-
Features:
- Weather-Resistant Dust Cover w/A Rubber Insert To Seal Out Water
- Spring-Loaded Cover Helps Keep Connector Clean When Not Using
- Plugs Into Oem Socket To Provide 7-Way Rv Blade
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 7-Way Connects Tail
- Brake
- Reverse
- Turn Signals
- Brakes
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer wiring connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram ProMaster 2500 |
Showing 1 - 10 of 17 products
Loading...