Image
Product
Price
- Oil Filter
- H-5.719 in.; OD-3.656 in.; 3/4 In.-16UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut~Excludes 1 Quart Cartridge Type
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.300 Lbs. (0.6 Kg)
- Product Box Height: 6.130 In. (156mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 5.719 In. (145mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
005557147R91, 028115561B, 068115561B, 068115561E, 105548, 1220193, 122P193, 1328691, 1520865002, 1520865011, 15208W1120, 15208W1123, 15208W3401, 1540232091, 1560041010, 156007600371, 156017800171, 156017810171...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Merkur XR4Ti | L | - | 4 Cyl 2.3L | 140 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1985 - Merkur XR4Ti | L | - | Canada | 4 Cyl 2.3L | Turbocharged | 140 |
- FRAM, PH8A, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Burst Pressure: 230.000
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 3.797
- Non Slip Grip: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- Micron Rating: 8.000
- Torque Nut: No
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
3645, 3I-1412, 6018, F76006, FF833, TP1049
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
- FRAM, HP1, Oil Filter
- FRAM HIGH PERFORMANCE High Performance Spin-on Oil Filter
- Product Attributes:
- Non Slip Grip: No
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 500.000
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Outside Diameter: 3.672
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.
This Part Fits the Following OEM/Substitute Numbers:
3120MP, 33120, 86120MP, BF7613, BF992, FF204
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
- WIX Spin-On Lube Filter
- Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Capacity: 0.00
- Duty Type: Ld
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- Bypass Relief Valve Setting: 8-11
- Media Material: Synthetic
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1985 - Merkur XR4Ti | L | - | Canada | 4 Cyl 2.3L | Turbocharged | 140 |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
- Turbo VIN Code "W"
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
- Oil Filter
- H-5.7 in.; OD-3.65 in.; 3/4 In. - 16UNF-2B Thread; psi Relief Valve 8-11 Pro-Series Oil Filter w/o Wrench Off Nut
- K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- High Flow Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.300 Lbs. (0.6 Kg)
- Product Box Height: 5.700 In. (145mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.810 In. (97 Mm)
- Package Material: Paperboard
- Product Box Length: 3.810 In. (97mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: No
- Item Height: 5.719 In. (145mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
- K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
This Part Fits the Following OEM/Substitute Numbers:
122P193, 41515, 51515, 51525, 51545, 51622, 51775, AFL1, FL1A, FL1HP, FL281, HD222, HP1, HP3001, L30001, L30119, L30257, L30341...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Merkur XR4Ti | L | - | 4 Cyl 2.3L | 140 |
Showing 1 - 10 of 14 products
Loading...