2011 Toyota Tundra Engine Oil Filter Parts

Choose your Submodel for your 2011 Toyota Tundra


Showing 1 - 10 of 22 products
Image
SKU
Product
Rating
Price

Wix
  • WIX Spin-On Lube Filter
  • Also Available In Master Pack Version Spin-On Filter ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 2.921
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 275
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2011 - Toyota Tundra V 3956 Canada 6 Cyl 4.0L 241

Wix
  • WIX Spin-On Lube Filter
  • Spin-On Filter Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 2.921
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 275
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
1348MP, 21348MP, 332145564, 3612413, 51348MP, 61348BP, 618-51348MP, 70001403, 7020215, 85348MP, B241MP, OP 618, PH2835B, PH3614FP, R85348MP, V241BP

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2011 - Toyota Tundra V 3956 Canada 6 Cyl 4.0L 241

Wix
  • WIX Cartridge Lube Metal Free Filter
  • Cartridge Type; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Outer Diameter Top: 2.755
    • Duty Type: Ld
    • Micron: 21.00
    • BetaRatio: 2/20/75=21/33/39
    • Style: Cartridge Lube Metal Free Filt
    • Media Material: Cellulose
    • Outer Diameter Bottom: 2.755
    • Class: A
    • Inner Diameter Bottom: 1.1
  • WIX Cartridge Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months.

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2011 - Toyota Tundra V 3956 Canada 6 Cyl 4.0L 241

Wix
  • WIX Cartridge Lube Metal Free Filter
  • Factory filled synthetic oil - WIX XP or WIX Premium; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Outer Diameter Top: 2.755
    • Duty Type: Ld
    • Micron: 21.00
    • BetaRatio: 2/20/75=21/33/39
    • Style: Cartridge Lube Metal Free Filt
    • Media Material: Cellulose
    • Outer Diameter Bottom: 2.755
    • Class: A
    • Inner Diameter Bottom: 1.1
  • WIX Cartridge Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months.

This Part Fits the Following OEM/Substitute Numbers:
0410822, 04152-38020, 04152-YZZA4, 122, 27041, 2OTT003, 415238020, 4152YZZA4, 47041, 5001204248, 57041, 57041XP, 618-57041, 67041, 67041X, 7041, 72249WS, 8-57041...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2011 - Toyota Tundra V 5663 Mexico 8 Cyl 5.7L 345

Fram
  • FRAM, CH10158, Oil Filter
  • Cartridge Oil Filter Cartridge
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 0.610
    • Inner Diameter Bottom: 1.102
    • Non Slip Grip: No
    • Gasket Thickness: 0.109
    • Torque Nut: No
    • Inside Diameter Top: 1.102
    • Gasket Material: O-ring (1) O-ring 1
    • Gasket Type: O-ring
    • Marine Approved: No
    • Outside Diameter: 2.756
    • Gasket Outside Diameter: 0.813
    • Bypass Relief Valve: No
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: No
  • FRAM Extra Guard® Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
10-30200, 21-8060, 2H0-13440-90, E5205, KN-145, LF574, M1C-257A, P7008

Additional Fitment Information:
Vehicle Block CC Engine CID
2011 - Toyota Tundra V 3956 6 Cyl 4.0L 241

Fram
  • CARTRIDGE OIL FILTER, DEFENSE
  • Cartridge Oil Filter DEFENSE

Additional Fitment Information:
Vehicle Block CC Engine CID
2011 - Toyota Tundra V 5663 8 Cyl 5.7L 345

Fram
  • FRAM, PH3614, Oil Filter
  • Spin-on Oil Filter Spin-on
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.500
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.078
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 310.000
    • Gasket Material: Base
    • Gasket Type: Base
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 2.984
    • Gasket Outside Diameter: 2.859
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
2900535100, 600-211-6240, A44081, B236, LF283, LF3415, PF2158, RV-51

Additional Fitment Information:
Vehicle Block CC Engine CID
2011 - Toyota Tundra V 3956 6 Cyl 4.0L 241

Fram
  • FRAM, XG3614, Oil Filter
  • Spin-on Spin-on Oil Filter
  • Ultra Synthetic
  • Product Attributes:
    • Non Slip Grip: Yes
    • Micron Rating: 3.000
    • Torque Nut: No
    • Burst Pressure: 310.000
    • Replaceable Filter: No
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 12.000
    • Marine Approved: No
    • Outside Diameter: 2.984
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
5214435, AF27, B23145, BE-231, FB100

Additional Fitment Information:
Vehicle Block CC Engine CID
2011 - Toyota Tundra V 3956 6 Cyl 4.0L 241

Denso
  • Engine Oil Filter
  • To 10/2010
  • Engine Oil Filter
  • FTF Engine Oil Filter
  • Product Attributes:
    • Gasket Inside Diameter: 64.0
    • Gasket Outside Diameter: 70.0
    • Bypass Relief Valve: Yes
    • Filter Media Material: Paper
    • Inside Thread Size: 0.75
    • Anti-Drain Back Valve: Yes
  • Working with various manufacturers, DENSO - already a global OEM leader in engine filtration components - continues to be an innovator and keeps DENSO ahead of the competition. First Time Fit Oil Filters are engineered to meet Denso's high quality standards delivering exemplary quality and performance. Quality assurance is guarenteed for Denso's First TIme Fit Oil Filters. You can be assured you're providing the best for your vehicle.

This Part Fits the Following OEM/Substitute Numbers:
15600-25010, 15601-44011, 1S7Z 6731-DA, 21000872, 25014441, 25322837, 25325406, 31017520, 4105 409, 4105 409AB, 4105 409AC, 4105 409BB, 4105409AC, 4273 810, 4419 970, 4781 452AA, 4781452BB, 51068...VIEW MORE

Additional Fitment Information:
Vehicle
2011 - Toyota Tundra

K&N
  • High Flow Premium Media; H-4.5 in.; OD 2.75 in.; Cartridge; Viton Rubber Gasket Material
  • K/N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available.
  • Oil Filter
  • Product Attributes:
    • Thread Size: N/a
    • WARNING CA Proposition 65: No
    • Bypass Valve: No
    • Style: Cartridge
    • Item Weight: 0.200 Lbs. (0.1 Kg)
    • Filter Material: High Flow Premium Media
    • Inside Diameter: 1.125 In. (29mm)
    • Gasket Material: Viton Rubber
    • Package Material: Corrugated
    • PSI Relief Valve: No
    • Outside Diameter: 2.750 In. (70mm)
    • Removal Nut: No
    • Item Height: 4.500 In. (114mm)
    • Package Type: Box
    • Anti-Drain Back Valve: No
  • Features:
    • High Performance Design for Outstanding Filtration
    • High-Efficiency Media with Uniform Pleats
    • Allows for High Oil Flow Rates
    • Ideal for High-End Synthetic Motor Oil
  • K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.

This Part Fits the Following OEM/Substitute Numbers:
01452YZZA4, 0410822, 0410845, 0415238020, 0415251010, 04152YZZA4, 19254715, 57041, 57310, 7041, 7310, 84041, 84081, 84310, AL10295, CF5702, CH10295, CH9641...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2011 - Toyota Tundra V 5663 8 Cyl 5.7L 345
Showing 1 - 10 of 22 products

Loading...