2012 Ford F 250 Super Duty Engine Oil Filter Parts
Choose your Engine for your 2012 Ford F-250 Super Duty
Image
Product
Price
- Oil Filter
- H-4.0 in.; OD-3.656 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut~22mm Thread
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 Special Thread X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04884899AB, 04884899AC, 05038041AA, 51372, 872025, 89017527, B329, F1AZ6714A, F1AZ6731BD, FL820, FL820S, L24651, M1210, M1210A, OD5419, PF1250, PH2, PH8A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- PRO-TEC Spin-On Lube Filter
- Master Pack Version; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.668
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 11-13 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 275
- BetaRatio: 2/20=12/25
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1372, 159, 21372, 31372, 5001200189, 51372, 51372XP, 61372, 61372BP, 61372X, 618-51372, 8-51372, 85372, AA2, B4651, CF110, CF110AP, D407...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6210 | Canada | 8 Cyl 6.2L | 379 |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.69
- Duty Type: Hd
- Micron: 5.00
- Style: Spin-on Lube Filter
- Class: Ha
- Burst Pressure: 312
- BetaRatio: 2/20/75=3/12/17
- Bypass Relief Valve Setting: 13
- Media Material: Microglass
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
27151, 5001313024, 57151, 57151XP, 618-57151, 67151, 714, 7151, 8-57151, 84151, CF651, COS10890, FL2051, FL2051S, FP10890, GP65, HP6128, L46128...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6651 | Mexico | DIESEL | 8 Cyl 6.7L | Turbocharged | 406 |
- Oil Filter
- H-6.656 in.; OD-3.719 in.; 1-1/16 in. - 16 Thread; psi Relief Valve 18-22 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: 1.0625 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.500 Lbs. (0.7 Kg)
- Product Box Height: 7.600 In. (193mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.900 In. (99 Mm)
- Package Material: Paperboard
- Product Box Length: 3.900 In. (99mm)
- PSI Relief Valve: 18-22
- Outside Diameter: 3.719 In. (94mm)
- Removal Nut: Yes
- Item Height: 6.656 In. (169mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
19254719, 57151, 7151, 84151, B7379, BC3Z6731A, BC3Z6731B, FL2051, FL2051S, L46128, LF651, M1405, M2051, M6128, MO2051, OF6128, PF67, PH10890...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- WIX Spin-On Lube Filter
- Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.66
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 11-13 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 275
- BetaRatio: 2/20=12/25
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
10028130, 1372MP, 21372MP, 3W7E6714BA, 51372MP, 61372BP, 618-51372MP, 85372MP, B4651MP, PF1250F, PH2FP, R85372MP, V4651BP
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6210 | Canada | 8 Cyl 6.2L | 379 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.668
- Capacity: 0.00
- Burst Pressure: 275
- Duty Type: Ld
- Flow Rate: 11-13 Gpm
- Style: Spin-on Lube Filter
- Media Material: Synthetic
- Class: A
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 333, 0 451 103 334, 0 986 AF0 068, 0 986 AF1 138, 0 986 AF1 172, 00FE00336, 0410813, 0986627634, 0D5419, 0FE00336, 10028130, 1220841, 1372, 1501014, 1503016, 15426, 159, 1AML00006A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6210 | Canada | 8 Cyl 6.2L | 379 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.69
- Duty Type: Hd
- Micron: 5.00
- Style: Spin-on Lube Filter
- Class: Ha
- Burst Pressure: 312
- BetaRatio: 2/20/75=3/12/17
- Bypass Relief Valve Setting: 13
- Media Material: Microglass
- Anti-Drain Back Valve: Yes
- WIX HD Oil Filters provide superior engine protection with high quality, high capacity media for applications such as medium and heavy trucks, farm, construction, mining, and other equipment. WIX filters are recommended for OEM oil and filter change intervals. High strength, corrosion-resistant cans, center tubes, and end caps with superior sealing components ensure a leak resistant, long-lasting, high performing oil filter under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
27151, 3973, 402051, 47151, 5001313024, 57151, 57151XP, 618-57151, 67151, 714, 7151, 8-57151, 84151, B7379, BC3Q6714CA, BC3Q6714DA, BC3Q6714MP, BC3Q6714MP1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6651 | Mexico | DIESEL | 8 Cyl 6.7L | Turbocharged | 406 |
- FRAM, PH2, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.420
- Non Slip Grip: Yes
- Gasket Thickness: 0.170
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 230.000
- Gasket Material: Nitrile Rubber
- Housing Color: Orange
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 3.656
- Gasket Outside Diameter: 2.810
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1784MP, L-2862, L30255, LF361, LF3630, PS-6001
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- FRAM, TG2, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Gasket Inside Diameter: 7.969
- Non Slip Grip: Yes
- Gasket Thickness: 0.266
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 230.000
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 3.656
- Gasket Outside Diameter: 8.500
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Tough Guard® Oil Filters with SureGrip® deliver premium high mileage engine protection for today's passenger cars and light duty trucks. Tough Guard provides premium engine protection for drivers in stop-and-go traffic and the durability to withstand tougher driving conditions and towing. Top quality engineering makes it an ideal pairing for any oil type. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
25011956, 517711, 83840E, L296F, LF637, LFR-8637, PF1065
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- FRAM, XG2, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 230.000
- Replaceable Filter: No
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 3.656
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
42998, A478CB, B40015M, VF1
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-250 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
Showing 1 - 10 of 22 products
Loading...