Image
Product
Price
- WIX Spin-On Lube Filter
- Factory filled synthetic oil - WIX XP or WIX Premium; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- FlowDirection: Outside-in
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.095
- Duty Type: Ld
- Style: Spin-on Lube Filter
- Media Material: Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 986 AF0 141, 0410834, 06H 115 403, 06H 115 561, 06J 115 403 C, 06J 115 403 J, 06J 115 403 M, 06J 115 403 Q, 06J 115 561 B, 0FE00413, 100 322 0014, 125, 15576, 23.493.00, 27561, 38477, 4297-OS, 5001273912...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Audi allroad | L | 1984 | United States | 4 Cyl 2.0L | 121 |
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Audi allroad |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Original
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Audi allroad |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Audi allroad |
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Audi allroad |
- LOP offers the ultimate Engine Oil Filter on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by LOP certified engineers.
- Loop
-
Features:
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are "ironed" for a precise fit, fluted to ease removal and painted to resist rust
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
- Provided with anti-drain back valve
This Part Fits the Following OEM/Substitute Numbers:
06J115403C, 57561, 84561, L35895, LF639, LP10600, OF35895, OF5895, PF465, PH10600, PZ175, S35895, VO101, X35895
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Audi allroad | L | 1984 | 4 Cyl 2.0L | 121 |
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Audi allroad |
- FRAM, PH10600, Oil Filter
- Spin-on Oil Filter Has an attached threaded filter adaptor
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.470
- Non Slip Grip: No
- Micron Rating: 16.000
- Torque Nut: No
- Burst Pressure: 300.000
- Gasket Material: Base
- Housing Color: Orange
- Inside Thread Diameter: 27mm X 1.5mm
- Bypass Relief Valve Setting: 35
- Marine Approved: No
- Outside Diameter: 2.951
- Gasket Outside Diameter: 2.840
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1085MP, 12187, 122-0602, B56, LF3525, LF438, LF451, LFR-83525, V4670BP
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Audi allroad |
Showing 1 - 8 of 8 products
Loading...