2021 Toyota Prius AWD e Engine Oil Filter Parts
Choose your Engine for your 2021 Toyota Prius AWD-e
Image
Product
Price
- WIX Spin-On Lube Filter
- Original Equipment Part Number 90915YZZF2 Spin-On Filter ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 400
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 986 452 017, 0 986 452 028, 0 986 452 035, 0 986 452 038, 0 986 452 060, 0 986 452 558, 0 986 452 907, 0 986 452 917, 0 986 452 928, 0 986 AF0 061, 0 986 AF0 149, 0 986 AF1 028, 0 986 B00 048, 0060290915005, 0082115, 0410670, 0410750, 0410759...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Toyota Prius AWD-e | L | 1798 | Canada | 4 Cyl 1.8L | 110 |
- FRAM, PH4967, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.210
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 350.000
- Gasket Material: Base
- Gasket Type: Base
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 14.000
- Marine Approved: No
- Outside Diameter: 2.688
- Gasket Outside Diameter: 2.480
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
32 00 5769, CAS6607, M1-108, ML16825, PH7025, PS-2004, PZ-37
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Prius AWD-e |
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Prius AWD-e |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Prius AWD-e |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- First Time Fit
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Prius AWD-e |
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Prius AWD-e |
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Prius AWD-e |
- LOP offers the ultimate Engine Oil Filter on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by LOP certified engineers.
- Loop
-
Features:
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are "ironed" for a precise fit, fluted to ease removal and painted to resist rust
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
- Provided with anti-drain back valve
This Part Fits the Following OEM/Substitute Numbers:
51065, 51394, 51395, 85394, AT4967, FP4967, L14476, LF410, LP4967, OF14476, PH4967, PZ39, S4476, VO40, X4476
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Prius AWD-e |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Prius AWD-e |
Showing 1 - 9 of 9 products
Loading...