Image
Product
Price
- Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44(TM) Delta Flow Mufflers/OEM Style Stainless Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44™ Delta Flow Mufflers/OEM Style Stainless Tips; 409 Stainless Steel;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Tip Diameter: 2.500 In.
- Muffler Count: 2
- Single or Dual: Dual
- System Type: Cat Back
- Muffler Part Number: Kit Only
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent Tubing
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- Our American Thunder exhaust system for 1986-1993 Ford Mustang LX (Fox body) with the 5.0L engine is a bolt-on emissions legal system. Features free-flowing 2.50-inch mandrel-bent stainless steel inlet pipes flowing into a pair of Super 44 Series mufflers for that deep iconic sound of the 5.0L engine. The 2.50-inch mandrel-bent stainless steel tailpipes use the factory hanger locations for a quick and easy installation and the system is finished off with a pair of long 2.50-inch 304 stainless steel tips for that show car look. Includes all necessary parts, hardware and easy to follow instructions and is covered by our Lifetime Limited Warranty. Note: Fits coupes and convertibles. Also fits 1986 Ford Mustang GT models with 5.0L engine
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15630, 17213, 17393, 5092R4, BT9400, BX50935S, M31015
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | LX | 302 |
- Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44(TM) Delta Flow Mufflers/OEM Style Stainless Tips;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44™ Delta Flow Mufflers/OEM Style Stainless Tips;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: N/a
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Tip Diameter: 2.500 In.
- Muffler Count: 2
- Single or Dual: Dual
- System Type: Cat Back
- Muffler Part Number: Kit Only
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16ga Aluminized Tubing
- Aggressive And Powerful Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- Our American Thunder exhaust system for 1987-1993 Ford Mustang LX with 5.0L engine is a bolt-on emissions legal system features free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes, aluminized steel tailpipes and uses the factory hanger locations for quick and easy installation. The kit comes with a pair of Super 44 mufflers to complement that iconic deep and powerful Fox body sound. The system is then finished off with a pair of long 2.50-inch 304 stainless steel tips for that show car look. Comes with all necessary hardware and easy to follow instructions. Note: Fits coupes and convertibles. Also fits 1986 Ford Mustang GT models with 5.0L engine.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15630, 17393, 5092R4, 817213, BT9400, BX50935S, M31015
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | LX | 302 |
- Turn Down In Front Of Rear Tire Exit
- Competition Series Stainless Cat-Back System
- Competition Series Stainless Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through
- Tip Finish: Polished
- Exit Style: Turndown In Front Of Rear Tire
- Tip Length: 9
- Tip Type: Clamp-on;single Wall;turndown;cut Edge
- Muffler Quantity: 2
- Subtitle: Cat-back
- Main Piping Diameter: 2.5
- Tip Diameter: 2.75
- Muffler Finish: Satin
- Tip Shape: Round
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Tip Diameter: 3
- Muffler Finish: Satin
- Tip Finish: Polished
- Tip Shape: Round
- Exit Style: Dual Split Rear
- Tip Type: Clamp-on;single Wall;angle Cut;cut Edge
- Muffler Quantity: 2
- Inlet Connection Type: Bolt-on
- Subtitle: Cat-back
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
Showing 1 - 4 of 4 products
Loading...