2025 Ram 1500 Exhaust System Kit Parts
Choose your Submodel for your 2025 Ram 1500
Image
Product
Price
- SPEQ Series Stainless Cat-Back System
- Dual Split Rear Exit
- Magnaflow SPEQ Series Stainless Cat-Back System
- Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through;tuned Chamber
- Muffler (Left) Body Width: 4
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler (Left) Body Height: 4
- Exhaust Tip Length: 15.75
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Muffler (Right) Body Length: 14
- Series: Speq
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Muffler (Left) Type: Tuned Chamber
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Muffler (Right) Body Height: 5
- Exhaust Tip Shape: Round
- Muffler (Right) Body Width: 5
- Prop 65 Y/N:
- N
- No
- Muffler (Right) Type: Straight-through
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 2025 Ram 1500 Speq Series Stainless Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Muffler (Left) Body Length: 11
- Exhaust Tip Finish: Stainless
-
Features:
- No-Drone-Technology (NDT) allows for a quiet cabin
- Increased Horsepower and Torque
- 100% Stainless Steel
- The MagnaFlow 2025 RAM 1500 I6-3.0L SPEQ Series Cat-Back Performance Exhaust System 19684 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19684 2.5” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance round muffler before exiting in a dual split rear exit with 5” polished tips. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19684 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19684 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2025 - Ram 1500 | L | 2993 | 6 Cyl 3.0L | Warlock | 183 |
- SPEQ Series Black Coated Cat-Back System
- Dual Split Rear Exit
- Magnaflow SPEQ Series Black Coated Cat-Back System
- Black Coated Tips Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through;tuned Chamber
- Muffler (Left) Body Width: 4
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler (Left) Body Height: 4
- Exhaust Tip Length: 15.75
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Muffler (Right) Body Length: 14
- Series: Speq
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Muffler (Left) Type: Tuned Chamber
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Muffler (Right) Body Height: 5
- Exhaust Tip Shape: Round
- Muffler (Right) Body Width: 5
- Prop 65 Y/N: N
- Muffler (Right) Type: Straight-through
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 2025 Ram 1500 I6 3.0l Speq Series Black Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Muffler (Left) Body Length: 11
- Exhaust Tip Finish: Black Coated
-
Features:
- 100% Stainless Steel
- No-Drone-Technology (NDT) allows for a quiet cabin
- Increased Horsepower and Torque
- The MagnaFlow 2025 RAM 1500 I6-3.0L SPEQ Series Cat-Back Performance Exhaust System 19685 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19685 2.5” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance round muffler before exiting in a dual split rear exit with 5” black coated tips. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19685 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19685 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2025 - Ram 1500 | L | 2993 | 6 Cyl 3.0L | Warlock | 183 |
- SPEQ Series Black Chrome Cat-Back System
- MagnaFlow SPEQ Series Black Chrome Cat-Back System
- Cat-Back
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Tuned Chamber
- Exhaust Tip Edge: Folded
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 11
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Speq
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Muffler Body Width: 4
- Main Piping Diameter: 3
- Clamping Type: Band Clamp;v-band
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: N
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 2025 Ram 1500 Rho Speq Series Black Coated Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Black Chrome
-
Features:
- No-Drone-Technology (NDT) allows for a quiet cabin
- 100% Stainless Steel
- Increased Horsepower and Torque
- The MagnaFlow 2025 RAM 1500 RHO SPEQ Series Cat-Back Performance Exhaust System 19704 brings out the personality of your truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19704 3” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber before exiting in a dual split rear exit with 5” black chrome tips. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will produce moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19704 features a cat-back exhaust layout that replaces your trucks’ stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19704 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2025 - Ram 1500 | L | 2993 | 6 Cyl 3.0L | RHO | 183 |
- 3in. Cat-Back. 2.5in. Dual Split Rear Exit. T304
- Only fits Hurricane 3.0L SST SO Engines only. Does not fit HO.
- MBRP S5156304 T304 Stainless Steel 3in Cat-Back, 2.5in Dual Split Rear Exit with Polished Tips.
- MBRP Armor Pro 3-Inch Cat-Back, 2.5-Inch Dual Split Rear with Tips
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Performance Gas
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 2
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Split Rear
- Cutting Required: No
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 18
- Spring Bolt Kit Included: No
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 5
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable T304 stainless steel construction. Rust resistant. Smooth 3 inch mandrel bent tubing. Clamps included. 5 inch OD mirror polished tips included. Enhanced moderate exhaust tone. 18 Percent Flow Increase.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|---|
| 2025 - Ram 1500 | L | 2993 | GAS | 6 Cyl 3.0L | Warlock | Hurricane | 183 |
- 3in. Cat-Back. 2.5in. Dual Split Rear Exit. T304, CF.
- Only fits Hurricane 3.0L SST SO Engines only. Does not fit HO.
- MBRP S51563CF T304 Stainless Steel 3in Cat-Back, 2.5in Dual Split Rear Exit with Carbon Fiber Tips.
- MBRP Armor Pro 3-Inch Cat-Back, 2.5-Inch Dual Split Rear with Carbon Fiber Tips
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Performance Gas
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material:
- Carbon Fiber
- Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 2
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Split Rear
- Cutting Required: No
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 18
- Spring Bolt Kit Included: No
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 5
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable T304 stainless steel construction. Rust resistant. Smooth 3 inch mandrel bent tubing. Clamps included. 5 inch OD carbon fiber tips included. Enhanced moderate exhaust tone. 18 percent flow increase.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|---|
| 2025 - Ram 1500 | L | 2993 | GAS | 6 Cyl 3.0L | Warlock | Hurricane | 183 |
- 3in. Cat-Back. 2.5in. Dual Split Rear Exit. AL
- Only fits Hurricane 3.0L SST SO Engines only. Does not fit HO.
- MBRP S5156AL Aluminized Steel 3in Cat-Back, 2.5in Dual Split Rear Exit with Polished Tips.
- MBRP Armor Lite 3-Inch Cat-Back 2.5-Inch Dual Split Rear with Tips
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Performance Gas
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 2
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Split Rear
- Cutting Required: No
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 18
- Spring Bolt Kit Included: No
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 5
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy-gauged aluminized steel. Sealed seams for rust resistant. Smooth 3 inch mandrel bent tubing. Clamps included. 5 inch OD mirror polished tips included. Enhanced moderate exhaust tone. 18 percent flow increase.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|---|
| 2025 - Ram 1500 | L | 2993 | GAS | 6 Cyl 3.0L | Warlock | Hurricane | 183 |
- 3in. Cat-Back. 2.5in. Dual Split Rear Exit. BLK
- Only fits Hurricane 3.0L SST SO Engines only. Does not fit HO.
- MBRP S5156BLK Black-Coated Aluminized Steel 3in Cat-Back, 2.5in Dual Split Rear Exit with Black Tips.
- MBRP Armor BLK 3-Inch Cat-Back, 2.5-Inch Dual Split Rear with Black Tips
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Performance Gas
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 2
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Split Rear
- Cutting Required: No
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 18
- Spring Bolt Kit Included: No
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Blk
- Exhaust Tip Diameter: 5
- Pipe Material: Black-coated Aluminized Steel
- Exhaust Tip Finish: Black-coated
-
Features:
- High-heat black-coating. Heavy-gauged aluminized steel. Sealed seams for rust resistant. Smooth 3 inch mandrel bent tubing. Clamps included. 5 inch OD black tips included. Enhanced moderate exhaust tone. 18 percent flow increase.
- STYLE THAT'S WORTH A SECOND LOOK - ARMOR BLK Series exhaust systems crank your vehicle’s style dial to 11. The ARMOR BLK series offers the same performance as the other series with an engineered, high-heat black powder coating on the tailpipe(s) and tip(s). Manufactured using heavy-gauge Aluminized Steel tubing throughout the whole system, everything but the tailpipe and tip are left as mill-finish steel for better resistance of damage under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. The black powder coating features a 1-year warranty against factory defects, and the remaining parts feature an industry leading 3-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|---|
| 2025 - Ram 1500 | L | 2993 | GAS | 6 Cyl 3.0L | Warlock | Hurricane | 183 |
- Street Series Stainless Cat-Back System
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Muffler Body Width: 11
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: Yes
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 2019-2025 Ram 1500 Street Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 2019-2025 Ram 1500 Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L 2019-2025 Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ram 1500's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19461 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19461 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2025 - Ram 1500 | V | 3604 | 6 Cyl 3.6L | 220 |
- SPEQ Series Stainless Cat-Back System
- Single Passenger Side Rear Exit
- Magnaflow SPEQ Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Folded Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Speq
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Muffler Body Width: 11
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: Yes
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N:
- N
- No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 2025 Ram 1500 Speq Series Stainless Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Stainless
-
Features:
- No-Drone-Technology (NDT) allows for a quiet cabin
- Increased Horsepower and Torque
- 100% Stainless Steel
- The MagnaFlow 2025 RAM 1500 V6-3.6L SPEQ Series Cat-Back Performance Exhaust System 19683 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19683 3” diameter mandrel bent main piping passes through a specifically tuned performance oval muffler before exiting in a single passenger side rear exit with a 4” polished tip. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19683 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19683 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2025 - Ram 1500 | V | 3604 | 6 Cyl 3.6L | 220 |
Showing 1 - 9 of 9 products
Loading...