Select a vehicle to find exact fit parts

2003 Isuzu Ascender

Back to vehicles list

2003 Isuzu Ascender HVAC Heater Hose Parts

Choose your Engine for your 2003 Isuzu Ascender

6 Cyl 4.2L 8 Cyl 5.3L

Showing 1 - 10 of 10 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2003 Isuzu Ascender HVAC Heater Hose - Tee To Engine 6 Cyl 4.2L Gates

W/Aux. Heater
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 180
  - 7.1
- End 1 Inside Diameter:
  - .58
  - 15
- Material: Epdm
- End 2 Inside Diameter:
  - .58
  - 15
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10453, 1405516E05, 14314S, 15138450, 15832905, 18453, 1L2Z 18472 BD, 1L2Z 18472 NA, 1L2Z 18472 PA, 22646764, 807615182, 89023416, 89025001, F10037, KH-72, KH-73, KH101

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2003 - Isuzu Ascender	L	-	Tee To Engine	GAS	6 Cyl 4.2L	256

1 In Stock

Limited-Time Offer

$26.90 USD

$32.28 USD


Brand	Gates
Part #	GRC18453
Condition	New
Warehouse	B

UPC: 072053468182

2003 Isuzu Ascender HVAC Heater Hose - Valve To Connector 6 Cyl 4.2L Gates

W/Aux. Heater; Cut to Length, 11"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2003 - Isuzu Ascender	L	-	Valve To Connector	GAS	6 Cyl 4.2L	256

2 In Stock

Limited-Time Offer

$107.00 USD

$128.40 USD


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

2003 Isuzu Ascender HVAC Heater Hose - Pipe-4 To Engine 6 Cyl 4.2L Gates

W/Aux. Heater; Cut to Length, 3"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2003 - Isuzu Ascender	L	-	Pipe-4 To Engine	GAS	6 Cyl 4.2L	256

2 In Stock

Limited-Time Offer

$107.00 USD

$128.40 USD


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

2003 Isuzu Ascender HVAC Heater Hose - Water Pump To Pipe-2 8 Cyl 5.3L Gates

90 Degree Molded Heater Hose
Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
  - .625
  - 16
- Angle: 90
- Arm Length:
  - 102
  - 152
  - 4
  - 6
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
- Quick Connect Fitting Quantity: 0
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0032224, 027004156, 05743507, 06006269, 07HS00043A, 07HS00044A, 0K01315421, 10002473, 10006390, 10018899, 10021318, 10038502, 10060964, 10065741, 10080395, 10135305, 10135333, 10145098...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2003 - Isuzu Ascender	V	5328	Water Pump To Pipe-2	GAS	8 Cyl 5.3L	325

6 In Stock

Limited-Time Offer

$27.92 USD

$33.50 USD


Brand	Gates
Part #	GRC28466
Condition	New
Warehouse	B

UPC: 072053062007

2003 Isuzu Ascender HVAC Heater Hose - Pipe-2 To Auxiliary Heater 6 Cyl 4.2L Gates

Cut to fit
90 Degree Molded Heater Hose
Product Attributes:
- Molded: Yes
- Centerline Length:
  - 26
  - 660
- End 1 Inside Diameter:
  - .625
  - 16
- Angle: 90
- Arm Length:
  - 18
  - 203
  - 457
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
- Quick Connect Fitting Quantity: 0
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0K20161211, 10387758, 14076098, 15032160, 15149281, 1608770, 18150L, 23538, 25505363, 25509454, 28469, 294019, 2L3Z 18472 BB, 2L3Z 18472 BC, 32002247, 4107, 4361125, 43819...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2003 - Isuzu Ascender	L	-	Pipe-2 To Auxiliary Heater	GAS	6 Cyl 4.2L	256

4 In Stock

Limited-Time Offer

$30.69 USD

$36.83 USD


Brand	Gates
Part #	GRC28469
Condition	New
Warehouse	B

UPC: 072053062038

2003 Isuzu Ascender HVAC Heater Hose - Pipe-1 To Water Pump 8 Cyl 5.3L Gates

90 Degree Molded Heater Hose
Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
  - .75
  - 19
- Angle: 90
- Arm Length:
  - 102
  - 152
  - 4
  - 6
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
- Quick Connect Fitting Quantity: 0
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

10017940, 10065640, 10065675, 10120065, 10135307, 10145119, 10188037, 10218423, 10227419, 10385281, 10441374, 1405531U00, 1405646R00, 1405670F05, 14244S, 15077061, 15123654, 15258060...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2003 - Isuzu Ascender	V	5328	Pipe-1 To Water Pump	GAS	8 Cyl 5.3L	325

11 In Stock

Limited-Time Offer

$19.04 USD

$22.85 USD


Brand	Gates
Part #	GRC28474
Condition	New
Warehouse	B

UPC: 072053062083

2003 Isuzu Ascender HVAC Heater Hose 6 Cyl 4.2L Gates

2003 Isuzu Ascender HVAC Heater Hose 6 Cyl 4.2L Gates

Molded
Heater to Tee - with Auxiliary Heater

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2003 - Isuzu Ascender	L	-	6 Cyl 4.2L	256

2 In Stock

Bargain Price

$44.09 USD

$52.91 USD


Brand	Gates
Part #	GAT2289858
Condition	New
Warehouse	A

2003 Isuzu Ascender HVAC Heater Hose - Auxiliary Heater To Pipe-3 6 Cyl 4.2L Gates

Cut to Length, 15"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .625
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2003 - Isuzu Ascender	L	-	Auxiliary Heater To Pipe-3	GAS	6 Cyl 4.2L	256


Brand	Gates
Part #	GRC28411
Condition	New
Warehouse	B

UPC: 072053066319

2003 Isuzu Ascender HVAC Heater Hose - Auxiliary Heater To Pipe-2 8 Cyl 5.3L Gates

Cut to Length, 15"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .625
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2003 - Isuzu Ascender	V	5328	Auxiliary Heater To Pipe-2	GAS	8 Cyl 5.3L	325


Brand	Gates
Part #	GRC28411
Condition	New
Warehouse	B

UPC: 072053066319

2003 Isuzu Ascender HVAC Heater Hose - Pipe-1 To Auxiliary Heater 8 Cyl 5.3L Gates

Cut to Length, 18"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .625
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.