1968 Pontiac Bonneville Spark Plug Parts
Choose your Engine for your 1968 Pontiac Bonneville
Image
Product
Price
- Champion Copper Plus- Boxed - RJ12YC
- Resistor Type Gap 0.035in ; Plug Type RJ12YC
- Champion Copper Plus 14 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.375
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.035
- 0.90
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.09
- Resistor Type: Yes
- Plug Type: Rj12yc
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14R32, 14R42, 4091933, 4339425, AR32, AR42, AS42C, BPR6S, CR43S, R42S, R43CS, R43S, R44S, RJ12YC, SF8E, SM8E, W20PRU, WR7F...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | 7014 | 8 Cyl 7.0L | 428 |
- Champion Copper Plus- Boxed - RJ18YC
- Gap 0.035in OE Type ; Plug Type RJ18YC
- Champion Copper Plus 58 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Rj18yc
- Hex Size:
- 0.813
- 20.650
- Reach: 0.375
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 18
- Pre-Gap Size:
- 0.035
- 0.90
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.09
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14-82, 4036, 4236, 45S, 46S, 7916, 7919, A82, AR82, BPM7, BPR4S15, R45S, R46S, R46SX, R46SZ, R47S, RJ18YC, W10F...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | 6555 | 8 Cyl 6.6L | 400 |
- Autolite 85 Copper Resistor Spark Plug
- OE Style; .035 Gap
- Copper Resistor Spark Plug
- Product Attributes:
- Center Electrode Design: Standard / Regular
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Resistor Type: Yes
- Insulator Material: Ceramic
- Hex Size:
- 13/16"
- 21
- Reach:
- 0.374
- 9.5
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Tapered
- Insulator Type: Mid Projection
- Pre-Gap Size:
- 0.034
- 0.90
- Resistance: 4000
- Ground Electrode Core Material: Nickel
- Autolite® Copper Spark Plugs are manufactured to deliver quick starts, improved fuel economy and smooth acceleration. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and Original Equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0 250 202 045, 10, 3036, 3332, 43S, A32
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery SubType | CID |
|---|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | - | 8 Cyl 6.6L | 4BBL | 400 |
- Autolite 86 Copper Resistor Spark Plug
- OE Style; .035 Gap
- Copper Resistor Spark Plug
- Product Attributes:
- Center Electrode Design: Standard / Regular
- Seat Type: Flat
- Electrical Terminal Type: Stud
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Resistor Type: Yes
- Insulator Material: Ceramic
- Hex Size:
- 13/16"
- 21
- Reach:
- 0.374
- 9.5
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Tapered
- Insulator Type: Mid Projection
- Pre-Gap Size:
- 0.035
- 0.90
- Resistance: 4000
- Ground Electrode Core Material: Nickel
- Autolite® Copper Spark Plugs are manufactured to deliver quick starts, improved fuel economy and smooth acceleration. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and Original Equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
33, 45S, 5858, 6006, A52
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery SubType | CID |
|---|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | - | 8 Cyl 6.6L | 2BBL | 400 |
- 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;0.035 in. Plug Gap
- U-Groove Spark Plug Header Plug; 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.1875 In.
- Reach: 0.375 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 8
-
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | 7014 | 8 Cyl 7.0L | 428 |
- 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;0.035 in. Plug Gap
- U-Groove Spark Plug Header Plug; 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.1875 In.
- Reach: 0.375 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 4
-
Features:
- C-Cut Ground Electrode
- Resistor Shorty Plugs
- 14mm Thread - .375 in. Reach
- Flat/Gasket Seat
- Projected Tip
- 13/16 in. Hex
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | 7014 | 8 Cyl 7.0L | 428 |
- 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;0.035 in. Plug Gap With Ram Air
- U-Groove Spark Plug Header Plug; 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.1875 In.
- Reach: 0.375 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 4
-
Features:
- C-Cut Ground Electrode
- Resistor Shorty Plugs
- 14mm Thread - .375 in. Reach
- Flat/Gasket Seat
- Projected Tip
- 13/16 in. Hex
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | 6555 | 8 Cyl 6.6L | 400 |
- 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;0.035 in. Plug Gap With Ram Air
- U-Groove Spark Plug Header Plug; 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.1875 In.
- Reach: 0.375 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 8
-
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | 6555 | 8 Cyl 6.6L | 400 |
- Autolite AP85 Platinum Spark Plug
- .035 Gap
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Design: Standard / Regular
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Platinum
- Resistor Type: Yes
- Insulator Material: Ceramic
- Hex Size:
- 13/16"
- 21
- Reach:
- 0.374
- 9.5
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Tapered
- Insulator Type: Mid Projection
- Pre-Gap Size:
- 0.034
- 0.90
- Resistance: 4000
- Ground Electrode Core Material: Nickel
- Autolite® Platinum Spark Plugs are manufactured to deliver greater durability compared to standard copper plugs. Autolite® Platinum Spark Plugs provide easier starts, quicker acceleration, and improved fuel economy. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14, 3037, 3332, 5614238, 7, AR32
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery SubType | CID |
|---|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | - | 8 Cyl 6.6L | 4BBL | 400 |
- Champion Copper Plus- Boxed - J12YC
- Non-Resistor Type Gap 0.035in OE Type ; Plug Type J12YC
- Champion Copper Plus Small Engine 10 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.375
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Pre-Gap Size:
- 0.035
- 0.89
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.09
- Resistor Type: No
- Plug Type: J12yc
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14-32, 14-42, 2642913, 42S, 43S, 44S, 9M4141, 9M4142, A22, A32, A42, A42C, AT42, B44S, BP6S, C44S, J12YC, M43S...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Pontiac Bonneville | V | 7014 | 8 Cyl 7.0L | 428 |
Showing 1 - 10 of 13 products
Loading...