1997 Jeep Cherokee Steering Tie Rod End Parts
Image
Product
Price
- At Pitman Arm; Front Left Outer Steering Tie Rod End
- with 22 (mm) Threads with Left Hand Threads Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3096L At Pitman Arm; Front Left Outer Steering Tie Rod End for Jeep Wrangler
- Product Attributes:
- Dust Boot Included: Yes
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Counterclockwise
- Type: Straight
- Greaseable: Yes
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 22.0
- End 1 Thread Pitch: 1.5
- Length - Stud Center to End: 5.420
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
03-87054, 269-2788, 2692788, 387054, 401-1476, 401-1476B, 4011476B, 45A0476, 46A0476A, 52005739, 534-493, 612.58007, 61358007, 8023096, DG4011476, ES3096, ES3096L, GES3096L...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | At Pitman Arm |
- At Pitman Arm; Front Left Outer Steering Tie Rod End
- with 22 (mm) Threads with Left Hand Threads
- MOOG ES3096L At Pitman Arm; Front Left Outer Steering Tie Rod End for Jeep Wrangler
- Product Attributes:
- Dust Boot Included: Yes
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Counterclockwise
- Type: Straight
- Greaseable: Yes
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 22.0
- End 1 Thread Pitch: 1.5
- Length - Stud Center to End: 5.420
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | At Pitman Arm |
- Front Left Outer; At Pitman Arm Steering Tie Rod End
- with 11/16 (in) x 18 Threads with Left Hand Threads Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3094L Front Left Outer; At Pitman Arm Steering Tie Rod End for Jeep Wrangler
- Product Attributes:
- End 1 Threads Per Inch: 18
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 5.370
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
03-87052, 269-2789, 2692789, 387052, 401-1477, 401-1477B, 4011477B, 45A0477, 46A0477A, 52005741, 539-059, 612.58008, 61358008, 8023094, DG4011477, ES3094, ES3094L, GES3094L...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | Front Left Outer |
- Front Left Outer; At Pitman Arm Steering Tie Rod End
- with 11/16 (in) x 18 Threads with Left Hand Threads
- MOOG ES3094L Front Left Outer; At Pitman Arm Steering Tie Rod End for Jeep Wrangler
- Product Attributes:
- End 1 Threads Per Inch: 18
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 5.370
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | Front Left Outer |
- Varies With Application; LH Thread
- Steering Tie Rod End; Varies With Application; LH Thread;
- Steering Tie Rod End
-
Features:
- Steering Tie Rod End
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | Front |
- To Inner Tie Rod; RH Thread
- Steering Tie Rod End; To Inner Tie Rod; RH Thread;
- Steering Tie Rod End
-
Features:
- Steering Tie Rod End
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | Inner (At Connecting Rod) |
- 6 1/4 in. Long; LH Thread
- Steering Tie Rod End; 6 1/4 in. Long; LH Thread;
- Steering Tie Rod End
-
Features:
- Steering Tie Rod End
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | Left |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | Front Right |
- Front Right Inner Steering Tie Rod End
- with 11/16 (in) x 18 Threads with Right Hand Threads Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3095R Front Right Inner Steering Tie Rod End for Jeep Wrangler
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Clockwise
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 5.390
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
03-87053, 269-2790, 269-6063, 2692790, 387053, 401-1478, 401-1478B, 4011478B, 45A0478, 46A0478A, 52005740, 531-006, 612.58009, 61358009, 8023095, DG4011478, ES3095, ES3095R...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | Front Right Inner |
- Front Right Inner Steering Tie Rod End
- with 11/16 (in) x 18 Threads with Right Hand Threads
- MOOG ES3095R Front Right Inner Steering Tie Rod End for Jeep Wrangler
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Clockwise
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 5.390
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Jeep Cherokee | Front Right Inner |
Showing 1 - 10 of 17 products
Loading...