1980 Chevrolet K10 Suburban Leaf Spring Assembly Parts
Choose your Engine for your 1980 Chevrolet K10 Suburban
Image
Product
Price
- SOFTRIDE FRONT SPRING/4IN. GM
- Lift Height 4 in.; Single
- SOFTRIDE FRONT SPRING/4in. GM
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Front |
- Height 6 in.; Does Not Includes Bushing
- Leaf Spring; Height 6 in.; Does Not Includes Bushing;
- Leaf Spring
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Pre Stressed
- A Compliant Ride And Desired Ride Height
- Diamond cut multi-leaf springs with urethane bushings provide additional clearance and improved ride quality.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Front |
- FITTED LEAFS FOR C125; PR
- Lift Height 2.5 in.; For Use w/PN[C125] Softride Leaf Spring; Pair
- FITTED LEAFS FOR C125;PR
- Fitted Leaf
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Fitted Leafs are designed as an option Exclusively for Skyjacker(R)Softride(R) Lifted Leaf Springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy w in. bumper, swing tire carrier, or all your extra gear.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Front |
- SOFTRIDE FRONT SPRING/6IN. GM
- Lift Height 6 in.; Single
- SOFTRIDE FRONT SPRING/6in. GM
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Front |
- SOFTRIDE REAR SPRG/4IN. GM
- Lift Height 4 in.; Single
- SOFTRIDE REAR SPRG/4in. GM
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Rear |
- SOFTRIDE REAR SPRG/6IN. GM
- Lift Height 6 in.; Single
- SOFTRIDE REAR SPRG/6in. GM
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Rear |
- 1973-1987 Chevy Truck 1/2/3/4 ton 4wd-Front 4in. Lift EZ-Ride Leaf Springs (each
- 4 in.; EZ-Ride; Includes Bushings; 2 Required
- 1973-1987 Chevy Truck 1/2/3/4 ton 4wd-Front 4in. Lift EZ-Ride Leaf Springs (each)
- Leaf Spring
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ultimate Combo Of Ride/Comfort And Durability
- Springs Are Tapered/Snub Rolled/Pre-Set
- Bushings Included w/All Springs
- Teflon Inserts Used To Reduce Squeaking
- Tuff Country replacement leaf springs are the superior choice when choosing a positive arch leaf spring. All springs are tapered, snub rolled and pre set for the most comfortable ride available in a lifted positive arch leaf spring. To reduce squeaking and improve ride characteristics, teflon inserts are also used between each leaf.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1980 - Chevrolet K10 Suburban | L | - | Front | 6 Cyl 4.1L | 250 |
- 2 in.; 46.23 in. Length; 3.74 in. Uncompressed Arch; 23.875 in. Uncompressed Half Length
- Leaf Spring; Front; 2 in.; 46.23 in. Length; 3.74 in. Uncompressed Arch; 23.875 in. Uncompressed Half Length;
- Leaf Spring
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Bushings Included
- Sold As A Pair
- Added Lift Height and Ride Comfort. Take your suspension kit to the next level with Rough Country's Replacement Leaf Springs. Constructed from high-quality materials and designed specifically for the weight of your vehicle. This enhanced replacement spring will provide a factory-like feel while retaining your suspension lift height. Durable and Off-Road Ready. Rough Country's Replacement Leaf Springs are designed to tackle any terrain that they are faced with. Featuring a multi-leaf design and spring pads this reduces the friction and maximizes comfort. Each leaf pack utilizes tapered leaves for improved flexibility at their ends. Installation. Rough Country's Replacement Leaf Springs offer a 100% bolt-on installation estimated to take approximately 1-2 hours depending on vehicle condition. Simply remove the pre-existing leaf spring and use the stock hardware to equip your vehicle with this high-quality replacement. Lifetime Replacement Warranty. Rough Country's Replacement Leaf is backed with a 5-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Front |
- 4 in.; 53 in. Length; 10 in. Uncompressed Arch; 26.5 in. Uncompressed Half Length
- Leaf Spring; Rear; 4 in.; 53 in. Length; 10 in. Uncompressed Arch; 26.5 in. Uncompressed Half Length;
- Leaf Spring
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Bushings Included
- Sold As A Pair
- Added Lift Height and Ride Comfort. Take your suspension kit to the next level with Rough Country's Replacement Leaf Springs. Constructed from high-quality materials and designed specifically for the weight of your vehicle. This enhanced replacement spring will provide a factory-like feel while retaining your suspension lift height. Durable and Off-Road Ready. Rough Country's Replacement Leaf Springs are designed to tackle any terrain that they are faced with. Featuring a multi-leaf design and spring pads this reduces the friction and maximizes comfort. Each leaf pack utilizes tapered leaves for improved flexibility at their ends. Installation. Rough Country's Replacement Leaf Springs offer a 100% bolt-on installation estimated to take approximately 1-2 hours depending on vehicle condition. Simply remove the pre-existing leaf spring and use the stock hardware to equip your vehicle with this high-quality replacement. Lifetime Replacement Warranty. Rough Country's Replacement Leaf is backed with a 5-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Rear |
- 2 in.; 49 in. Length; 7.75 in. Uncompressed Arch; 26 in. Uncompressed Half Length
- Leaf Spring; Rear; 2 in.; 49 in. Length; 7.75 in. Uncompressed Arch; 26 in. Uncompressed Half Length;
- Leaf Spring
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Bushings Included
- Sold As A Pair
- Added Lift Height and Ride Comfort. Take your suspension kit to the next level with Rough Country's Replacement Leaf Springs. Constructed from high-quality materials and designed specifically for the weight of your vehicle. This enhanced replacement spring will provide a factory-like feel while retaining your suspension lift height. Durable and Off-Road Ready. Rough Country's Replacement Leaf Springs are designed to tackle any terrain that they are faced with. Featuring a multi-leaf design and spring pads this reduces the friction and maximizes comfort. Each leaf pack utilizes tapered leaves for improved flexibility at their ends. Installation. Rough Country's Replacement Leaf Springs offer a 100% bolt-on installation estimated to take approximately 1-2 hours depending on vehicle condition. Simply remove the pre-existing leaf spring and use the stock hardware to equip your vehicle with this high-quality replacement. Lifetime Replacement Warranty. Rough Country's Replacement Leaf is backed with a 5-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet K10 Suburban | Rear |
Showing 1 - 10 of 14 products
Loading...