Image
Product
Price
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K8195T Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-88001, 02-88004, 0288001E, 10247PA, 10253, 10253HD, 1253K, 14039008, 260-1106, 260-1342, 260-1342FT, 260-1364, 2601342FT, 288001, 288004, 305113, 31027, 3633950...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1982 - Ford F-100 | Front Lower | RWD |
- Ball Joint
- with 5000 (lb) & 5150 (lb) GVW with Front I-Beam Axle
- MOOG K8195T Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Brakes |
|---|---|---|
| 1982 - Ford F-100 | Front Lower | Power |
- Ball Joint
- with 5000 (lb) & 5150 (lb) GVW with Front I-Beam Axle Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K8195T Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Brakes |
|---|---|---|
| 1982 - Ford F-100 | Front Lower | Power |
- Ball Joint
- MOOG K8195T Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1982 - Ford F-100 | Front Lower | RWD |
- Suspension Ball Joint
- Non-Adjustable
- Product Attributes:
- Housing Press Fit Diameter: 44.6 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Nut; 1 Circle Clip
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Greaseable: Yes
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 0.75
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Metal
- Mounting Type: Pressed
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
14039008, 45D2156, 610.66001, 8122496, BJ660FT, D1TZ3050A, FA660G, GK8195T, JBJ7011, K-8195, K8195T, MK8195T, SK6121, TC1658
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Ford F-100 | Front Lower |
- Suspension Ball Joint
- 4,700 Lb. GVW
- Product Attributes:
- Housing Press Fit Diameter: 41.65 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Zerk Fitting; 1 Nut; 1 Snap Ring
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Greaseable: Yes
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 0.625
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Steel
- Mounting Type: Pressed
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
45D2190, 610.65001, BJ1461FT, E0TZ3050C, GK8411, JBJ7019, K8411, MCS10253, MK8411, SK8411, TC5459
Additional Fitment Information:
| Vehicle | Position | Brakes |
|---|---|---|
| 1982 - Ford F-100 | Front Lower | Power |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 41.65 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Zerk Fitting; 1 Cotter Pin; 1 Snap Ring; 1 Castle Nut
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: Yes
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Steel
- Mounting Type: Pressed
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
45D0055, 610.65054, BJ1462FT, E0TZ3049B, FA1462, GK8412T, JBJ871, K-8412, K8412T, MK8412T, SK8412T, TC1660
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Ford F-100 | Front Upper |
- With I-Beam Axle With 5000 Lb & 5150 Lb GVW
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
- TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Brakes |
|---|---|---|
| 1982 - Ford F-100 | Front Lower | Power |
- With I-Beam Axle With 4700 Lb GVW
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
- TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10262, 10376, 10380, 12140019, 12140025, 2601266, 2601419, 505-1100, 505-1190, B8411, BJ86025, BJ86385, GK8411, GK8561T, JBJ7019, K8411, K8561, K8561T...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Brakes |
|---|---|---|
| 1982 - Ford F-100 | Front Lower | Power |
- With I-Beam Axle From 08/04/81 With 5000 Lb & 5150 Lb GVW
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
- TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10253, 12140027, 2601342, 505-1156, 531-245, B8195, GK8195T, JBJ7011, K8195T, MK8195T, TK8195T
Additional Fitment Information:
| Vehicle | Position | Brakes |
|---|---|---|
| 1982 - Ford F-100 | Front Lower | Power |
Showing 1 - 10 of 10 products
Loading...