Image
Product
Price
- 90/10 Series; Front; w/0 in. Lift/Drop Not For Street Use
- Street/Strip Drag Shocks; 90/10 Series; Front;
- Street/Strip Drag Shocks
- Product Attributes:
- Collapsed Length: 8.510 In.
- Shock Stroke: 4.930 In.
- WARNING CA Proposition 65: No
- Extended Length: 13.440 In.
- Compression / Rebound: 90/10
-
Features:
- Features Twin Tube Construction
- Special Hydraulic Oil Formulation Reduces Foaming
- Multi-stage Valving Provides Greater Stability
- Mounts In OE Locations
- Chrome Plated Piston rod For Long Seal Life
- Limited 90 Day Warranty
- The 40100 by Lakewood is a 90/10 front shock used on GM A and G body vehicles. These are designed to provide maxim front to rear weight transfer and have been proven to reduce ETs. Lakewood Industries is the leader in drag race chassis and suspension technology. Using decades of track and laboratory research, Lakewood Industries has developed the most consistent and accurate drag shock on the market today Lakewood drag shocks have been precisely tuned for superior weight transfer that remains consistent pass after pass. Additionally, the multi-stage valving provides more stability and control mid track. 90/10 front shocks and struts are intended for track use only and provide the maximum front to rear weight transfer. Disconnecting the front sway bar is recommended for maximum track performance.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1983 - Chevrolet El Camino | V | 3800 | Front | 6 Cyl 3.8L | 231 |
- B6 Performance-Shock Absorber
- Not For Self Leveling Systems;w/0 in. Lift/Drop;
- 46mm Monotube Shock Absorber
- B6 Performance Shock Absorber
- Product Attributes:
- Boot Included: Blue Straight
- Internal Design: Monotube
- Lower Mount Type: Cantilever
- Upper Mount Type: Bar Pin
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- B6 Performance Shock Absorber
- Monotube Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Durability And Performance
- Vehicle Specific Ride Tuning
- Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
084548, 24009294, 8040-1088, AK2080, B46-0929, F4-B46-0929-H0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1983 - Chevrolet El Camino | V | - | Rear | 6 Cyl 3.8L | 229 |
- Shock Stocker S-Adj 13.50 -21 T-Bar/Eye-P
- Stocker Star single adjustable smooth body shock. For use in the rear of a variety of GM A, B, G and X-body vehicles.
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
- Title: Qa1 Shock Absorber Ts801
- QA1's stock mount aluminum shocks are available for GM A, B, G and X-bodies with double, single and non-adjustable valving. These shocks you can get exactly the ride you want along with high performance handling all at an unbeatable price. Made in Lakeville, Minnesota, Easy, Bolt-In Installation, No Cutting or Welding Needed, Non-Coil-Over, Lightweight Aluminum, Stock Mount, 100% Dyno Tested and Serialized, Rebuildable and Revalveable by the QA1 Factory or QA1 Authorized Service Centers.
Additional Fitment Information:
| Vehicle |
|---|
| 1983 - Chevrolet El Camino |
- STREET PERFORMANCE (REAR, LOWERED)
- SN12: Fits Vehicles with 0"-1.5" Rear Lowering
- Shocks features include: Metal dust boots, Hardened Chrome 15mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings.
- Product Attributes:
- Title: Belltech 2209ih Shock Absorber Street Performance
-
Features:
- Our engineers focused their attention on tuning the low speed compression characteristics of this shock absorber, which is responsible for controlling your Sport Truck or SUV's pitch and roll
- Progressive rebound tuning complements large aftermarket wheels, keeping the ride smooth but firm and in control
- Large 45mm body diameters and twin tube design allow for larger oil volume and better heat dissipation leading to increased shock life
- Large 35mm piston and valves allow greater hydraulic control during quick wheel movements and long shock travel
- Low friction sealing and guide system? creates a quick reacting damper that is sensitive to the smallest of motions with little to no temperature increase during extreme damper conditions
- Steel dust cover adds protection for the piston rod, sealing system, and does not deteriorate from UV exposure or chemicals
- Tuned high durometer vulcanized rubber bushings reduce noise, vibration, and harshness (NVH)
- 2 Year Warranty - Unlimited Mileage
- The Belltech Street Performance lowering shock lineup has been engineered to provide a premium ride quality for today's trucks and SUV's. Our engineers focused their attention on tuning the low speed compression characteristics of this shock absorber, which is responsible for controlling your Sport Truck or SUV's pitch and roll, dive and squat to help keep you confident and in control. The "Progressive"rebound tuning will complement large aftermarket wheels, keeping the ride smooth but firm and in control.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 1983 - Chevrolet El Camino | Rear | United States | SS |
- STREET PERFORMANCE (FRONT, LOWERED)
- Shocks features include: Metal dust boots, Hardened Chrome 15mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings.
- Product Attributes:
- Title: Belltech 10102i Shock Absorber Street Performance
-
Features:
- Our engineers focused their attention on tuning the low speed compression characteristics of this shock absorber, which is responsible for controlling your Sport Truck or SUV's pitch and roll
- Progressive rebound tuning complements large aftermarket wheels, keeping the ride smooth but firm and in control
- Large 45mm body diameters and twin tube design allow for larger oil volume and better heat dissipation leading to increased shock life
- Large 35mm piston and valves allow greater hydraulic control during quick wheel movements and long shock travel
- Low friction sealing and guide system? creates a quick reacting damper that is sensitive to the smallest of motions with little to no temperature increase during extreme damper conditions
- Steel dust cover adds protection for the piston rod, sealing system, and does not deteriorate from UV exposure or chemicals
- Tuned high durometer vulcanized rubber bushings reduce noise, vibration, and harshness (NVH)
- 2 Year Warranty - Unlimited Mileage
- The Belltech Street Performance lowering shock lineup has been engineered to provide a premium ride quality for today's trucks and SUV's. Our engineers focused their attention on tuning the low speed compression characteristics of this shock absorber, which is responsible for controlling your Sport Truck or SUV's pitch and roll, dive and squat to help keep you confident and in control. The "Progressive"rebound tuning will complement large aftermarket wheels, keeping the ride smooth but firm and in control.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1983 - Chevrolet El Camino | V | - | 2 | Fleetside | United States | 6 Cyl 3.8L | Standard Cab Pickup | RWD | Front | 79.5 | SS | 229 |
Showing 1 - 5 of 5 products
Loading...