Image
Product
Price
- High Pressure Monotube Gas Shock
- Lift Replacement Shocks Lift = 0-2
- MonoMax
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E1 L/e(19)
- Upper Mount Type: E1 L/e(19)
- Compressed Length: 14.17
- Dust Cover Included: Y
- Extended Length: 21.46
- Stroke Length: 7.28
- Internal Rebound Bumper: Y
- Includes Bump Stop: N
-
Features:
- Maximum performance upgrade with up to 40% more damping performance than standard shock absorbers
- Perfect solution when you need to upgrade suspension performance on your Toyota truck
- Truck monotube design outperforms all other standard shock absorbers
- Zinc-coated, stainless steel piston ring provides a positive seal in the most extreme conditions
- Rubber boot to protect the shaft and keep dirt and debris away from the seals
- Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
- Tough conditions demand tough truck shocks. The large bore KYB MonoMax provides the additional stability that heavier, more powerful or high center of gravity vehicles demand. The KYB MonoMax is a heavy duty monotube shock absorber that provides the most handling, control and durability of any KYB shock; and its just for trucks. The MonoMaxs tough design automatically adjusts to driving conditions with fade-free performance. The KYB MonoMax has an outstanding reputation for vehicles that do real work, go off-road, tow a trailer or haul heavy loads. It uses a work-ready, zinc-coated steel piston ring and includes an off-road dust boot.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota 4Runner | Rear |
- 1984-1985 Toyota 4Runner 4wd (w/3in. Rear suspension lift)-Rear SX8000 Nitro Gas
- Recomm. For Use w/3.5 in. Rear Stock Blks; Veh. w/2 in. Stock Rear Blocks May Req.Add Lift In Rear Of Veh.; Includes Multi-Fit Hdwr. Pk.; 2 Req.; w/4 in. Lift 4 PN[SB34] Are Required For Rear Pair Of Shocks Purchased w/o Tuff Lift Kit
- Tuff Country EZ-Ride s SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Upper Mount Type: N/a
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota 4Runner | Rear |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 3-4" Front Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 296.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 16mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24185745, 689235, BE5-6582, F4-BE5-6582-H5
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1986 - Toyota 4Runner | Front | DLX |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 3-4" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 19mm
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 406.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 19mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24185752, 689236, BE5-6583, F4-BE5-6583-H5
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1986 - Toyota 4Runner | Rear | DLX |
- B6 4600 - Suspension Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- Boot Included: Blue Straight
- Internal Design: Monotube
- Lower Mount Type: Eye 19mm
- Upper Mount Type: Eye 19mm
- Reservoir: No
- Segment: Light Truck
- Adjustable Damping: Non-adjustable
- Spring Seat Included: No
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Specific tuning for stock height vehicles
- Uses OEM springs and mounting hardware
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24011402, 321506, 921506, B46-1140, F4-B46-1140-H2, RS5180, RS999180
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1986 - Toyota 4Runner | Rear | DLX |
- B6 4600 - Suspension Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- Boot Included: Blue Bellows
- Internal Design: Monotube
- Lower Mount Type: Eye 16mm
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Adjustable Damping: Non-adjustable
- Spring Seat Included: No
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Specific tuning for stock height vehicles
- Uses OEM springs and mounting hardware
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
084587, 24011396, 314014, 914014, B46-1139, F4-B46-1139-H1, MX6044, RS5145, RS999145
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1986 - Toyota 4Runner | Front | DLX |
- with Front Raised Height 0 (in) to 1.0 (in)
- RS5000X
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4851135120, 4851139425, 4851139555, 4851139556, 4851139565, 4851139566, 4851139605, 4851139616, 4851139625, 4851139626, 4851139645, 4851139675, 4851139676, 4851139685, 4851139705, 4851139715, 4851139725, 4851139765...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota 4Runner | Front |
- BLACK MAX SHOCK ABSORBER
- w/Black Boot; 18.66 in. Extended; 11.52 in. Collapsed; w/3 - 4 in. Lift
- BLACK MAX SHOCK W/BLK BOOT
- Black MAX Shock Absorber
- Product Attributes:
- Collapsed Length: 11.520 In.
- Shock Stroke: 7.140 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 18.660 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity for MAX Heat Dissipation
- 360 Degree Arc Welded End Mounts
- 180 Degree Directional Mounting
- Twin Tube Construction
- Chrome Plated Shaft
- Sintered Iron Piston
- Limited Lifetime Warranty
- Black MAX twin tube shock absorbers have increased fluid capacity and utilize foam-cell technology. When the shock is working hard and gets hot, the foam-cell insert compresses to compensate for oil expansion which maintains consistent MAX performance throughout the operating temperature range of the shock. The foam-cell design also eliminates air inside the shock which allows for mounting in any direction. Arc-welded end mounts and select specific valving give this shock absorber MAX value.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota 4Runner | Front |
- BLACK MAX SHOCK ABSORBER
- w/Black Boot; 18.66 in. Extended; 11.52 in. Collapsed; w/3 - 4 in. Lift
- BLACK MAX SHOCK W/BLK BOOT
- Black MAX Shock Absorber
- Product Attributes:
- Collapsed Length: 11.520 In.
- Shock Stroke: 7.140 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 18.660 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity for MAX Heat Dissipation
- 360 Degree Arc Welded End Mounts
- 180 Degree Directional Mounting
- Twin Tube Construction
- Chrome Plated Shaft
- Sintered Iron Piston
- Limited Lifetime Warranty
- Black MAX twin tube shock absorbers have increased fluid capacity and utilize foam-cell technology. When the shock is working hard and gets hot, the foam-cell insert compresses to compensate for oil expansion which maintains consistent MAX performance throughout the operating temperature range of the shock. The foam-cell design also eliminates air inside the shock which allows for mounting in any direction. Arc-welded end mounts and select specific valving give this shock absorber MAX value.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota 4Runner | Front |
- BLACK MAX SHOCK ABSORBER
- w/Black Boot; 24.75 in. Extended; 14.54 in. Collapsed; w/3 - 4 in. Lift
- BLACK MAX SHOCK W/BLK BOOT
- Black MAX Shock Absorber
- Product Attributes:
- Collapsed Length: 14.540 In.
- Shock Stroke: 10.210 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 24.750 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity for MAX Heat Dissipation
- 360 Degree Arc Welded End Mounts
- 180 Degree Directional Mounting
- Twin Tube Construction
- Chrome Plated Shaft
- Sintered Iron Piston
- Limited Lifetime Warranty
- Black MAX twin tube shock absorbers have increased fluid capacity and utilize foam-cell technology. When the shock is working hard and gets hot, the foam-cell insert compresses to compensate for oil expansion which maintains consistent MAX performance throughout the operating temperature range of the shock. The foam-cell design also eliminates air inside the shock which allows for mounting in any direction. Arc-welded end mounts and select specific valving give this shock absorber MAX value.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Toyota 4Runner | Rear |
Showing 1 - 10 of 19 products
Loading...