1988 Chevrolet Blazer Shock Absorber Parts
Choose your Engine for your 1988 Chevrolet Blazer
Image
Product
Price
- High Pressure Monotube Gas Shock
- Maximum Monotube Performance Upgrade with Dual Front Shocks-inside shock
- MonoMax
- Product Attributes:
- Feature and Benefit 5: Rubber Boot To Protect The Shaft And Keep Dirt And Debris Away From The Seals
- Feature and Benefit 4: Zinc-coated, Stainless Steel Piston Ring Provides A Positive Seal In The Most Extreme Conditions
- Upper Mount Type: E2(12.8x41.3)
- Feature and Benefit 6: Engineered To Help Vehicles With Electronic Safety Systems (esc, Abs, Etc.)
- Compressed Length: 13.31
- Dust Cover Included: Y
- Feature and Benefit 1: Maximum Performance Upgrade With Up To 40% More Damping Performance Than Standard Shock Absorbers
- B-stop: N
- Feature and Benefit 3: Truck Monotube Design Outperforms All Other Standard Shock Absorbers
- Feature and Benefit 2: Perfect Solution When You Need To Upgrade Suspension Performance On Your Gm Truck
- Lower Mount Type: E2(12.8x41.3)
- R-stop: Y
- Extended Length: 20.39
- Stroke Length: 7.09
- Tough conditions demand tough truck shocks. The large bore KYB MonoMax provides the additional stability that heavier, more powerful or high center of gravity vehicles demand. The KYB MonoMax is a heavy duty monotube shock absorber that provides the most handling, control and durability of any KYB shock; and its just for trucks. The MonoMaxs tough design automatically adjusts to driving conditions with fade-free performance. The KYB MonoMax has an outstanding reputation for vehicles that do real work, go off-road, tow a trailer or haul heavy loads. It uses a work-ready, zinc-coated steel piston ring and includes an off-road dust boot.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
77355
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1988 - Chevrolet Blazer | Front | 4WD |
- with Rear Raised Height 2.5 IN to 4.0 IN
- Rancho RS9000XL Shock Absorber
This Part Fits the Following OEM/Substitute Numbers:
1F0034700, 1F0134700, 1F2028700, 1F2034700, 1F2128700, 1F2134700, 1F2228700, 1F2328700, 1F2428700, 1F2528700, 1F6028700, 1F6034700B, 1F6128700, 1F6134700, 1F6228700B, 1F6234700, 1F6328700B, 1F6334700A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1988 - Chevrolet Blazer | Rear | 4WD |
- B8 5125-Shock Absorber
- Compression Bump Stop On Chassis May Need To Be Modified To Prevent Damage To The Shock;w/6 in. Lift; For Use w/Leaf Front Springs; w/Leaf Rear Springs
- 46mm Monotube Shock Absorber
- 5100 Series Shock Absorber
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length:
- 17.910 In.
- 455mm
- Extended Length Rounded: 30 In.
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Rebound @0.26m/s: 2550
- Reservoir Included: No
- Collapsed Length (MM): 455.0
- Collapsed Length (IN) Rounded: 18
- Adjustable Damping: Non-adjustable
- Rebound @0.52m/s: 2550
- Mount Type: Eye-to-eye
- Collapsed Length Rounded: 18 In.
- Internal Design: Monotube
- Upper Mount Type:
- Eye 0.625 In.
- Eye 5/8in
- Extended Length (MM): 754.5
- Reservoir: No
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Boot Included: Black Bellows
- Lower Mount Type:
- Eye 0.625 In.
- Eye 5/8in
- Extended Length (IN) Rounded: 30
- Extended Length:
- 29.700 In.
- 754.5mm
- Body Diameter (ID): 46mm
- Compression @0.52m/s: 700
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5125 shock absorbers are designed for custom applications and are a perfect solution for vehicles that do not have a direct Bilstein fitment. These high gas pressure monotube shock absorbers are sold by various lengths and valve rates to accommodate a wide range of uses and custom fitments. All B8 5125 shock absorbers come equipped with industry standard 5/8 inch hour glass bushings and are available in either an eye/eye or stem/eye mount configuration. The shock absorbers feature a 46mm piston with self-adjusting deflective disc valving. Bilstein B8 5125 shock absorbers are the ideal choice for custom suspension builders.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
33185569, 465289, BE5-6249, F4-BE5-6249-H5, F4-BE5-6249-H6
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Chevrolet Blazer | V | - | Rear | 8 Cyl 6.2L | 379 |
- 1984-1985 Toyota 4Runner 4wd (w/3in. Rear suspension lift)-Rear SX8000 Nitro Gas
- Recomm. For Use w/3.5 in. Stock Blks; Veh. w/2 in. Stock Blocks May Req.Add Lift In Of Veh.; Includes Multi-Fit Hdwr. Pk.; 2 Req.;w/2 - 3 in. Lift; New Rear Springs Require PN[61301]
- 1984-1985 Toyota 4Runner 4wd (w/3in. Rear suspension lift)-Rear SX8000 Nitro Gas Shock (each)
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Upper Mount Type: N/a
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Chevrolet Blazer | Rear |
- 2011-2019 Chevy Silverado 3500 4x4 (w/6in. suspension lift)-Front SX8000 Gas Sho
- New Shocks Optional Leveling Kit Will Install w/o New Shocks; Includes Multi-Fit Hardware Pack; 2 Required;w/3 - 6 in. Lift;
- 2011-2019 Chevy Silverado 3500 4x4 (w/6in. suspension lift)-Front SX8000 Gas Shock (each)
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Upper Mount Type: N/a
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Chevrolet Blazer | Front |
- 2011-2019 Chevy Silverado 3500 4x4 (w/6in. suspension lift)-Front SX8000 Gas Sho
- New Shocks Optional Leveling Kit Will Install w/o New Shocks; Includes Multi-Fit Hardware Pack; 2 Required;w/3 in. Lift;
- 2011-2019 Chevy Silverado 3500 4x4 (w/6in. suspension lift)-Front SX8000 Gas Shock (each)
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Upper Mount Type: N/a
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Chevrolet Blazer | Front |
- with Front Raised Height 2.5 IN to 4 IN with Factory Equipped Quad Shocks
- Rancho RS9000XL Shock Absorber
This Part Fits the Following OEM/Substitute Numbers:
15998555, 22007756, 22011979, 22011983, 22011984, 22011988, 22012145, 22046802, 22046805, 22046811, 22046812, 22064003, 22064004, 22064063, 22064064, 22064066, 22064067, 22064069...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1988 - Chevrolet Blazer | Front Inner | 4WD |
- Monro-Matic Plus Shock Absorber
- with Factory Equipped Quad Shocks
- Monroe Shocks & Struts Monro-Matic Plus 33086 Shock Absorber
- Monroe Monro-Matic Plus Shock Absorber
- Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers passenger cars improved comfort at an economical price.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
22003310, 22011979, 22011983, 22011984, 22012098, 22046408, 22064002, 22064003, 22064004, 22064005, 22064427, 22064429, 22065226, 3187843, 3187844, 3187847, 344073, 344075...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Chevrolet Blazer | Front Inner |
- Gas-Magnum Shock Absorber
- ; Premium - Limited Lifetime Warranty
- Monroe Shocks & Struts Gas-Magnum 34824 Shock Absorber
- Monroe Gas-Magnum Shock Absorber
- The Monroe® Gas-Magnum® truck shock absorber is designed for mid to full size, hard working pick-up trucks and vans. These units provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1 inch bore shocks, Monroe® Gas-Magnum® truck shocks work more efficiently with less effort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
22007756, 22011979, 22011984, 22011988, 22012145, 22064294, 22064296, 3187843, 3187844, 344072, 4993562, 58349, 58366, 58438, 77349
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Chevrolet Blazer | Rear |
- 1980-1996 Ford Bronco 4x4 (w/5in. Rear suspension lift)-Rear SX6000 Hydraulic Sh
- Includes Multi-Fit Hardware Pack; 2 Required;w/4 - 6 in. Lift;
- 1980-1996 Ford Bronco 4x4 (w/5in. Rear suspension lift)-Rear SX6000 Hydraulic Shock (each)
- SX6000 Shock Absorber
- Product Attributes:
- Collapsed Length: 17.000 In.
- Shock Stroke: 12.500 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 29.500 In.
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Midsize/Mini Trucks/Jeeps/SUVs
- Cellular Gas Charged
- Polyurethane Bushings
- Twin Tube Construction
- Shock Boots Sold Separately
- Multi Stage Valving
- Smooth Controlled Ride
- Limited Lifetime Warranty
- Tuff Country EZ-Ride's SX6000 Cellular Gas shock absorbers are recommended for all mini and mid-size applications. The multi stage valving provides a smooth controlled ride on and off-road.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Chevrolet Blazer | Rear |
Showing 1 - 10 of 21 products
Loading...