Image
Product
Price
- B6 4600 - Suspension Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- Boot Included: Blue Bellows
- Internal Design: Monotube
- Lower Mount Type: Eye 12.9mm
- Upper Mount Type: Eye 12.9mm
- Reservoir: No
- Segment: Light Truck
- Adjustable Damping: Non-adjustable
- Spring Seat Included: No
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Specific tuning for stock height vehicles
- Uses OEM springs and mounting hardware
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
084369, 12474690, 12477880, 12477891, 22064447, 22064622, 22064855, 22099902, 22165711, 22165713, 24-014106, 24014120, B46-1412, F4-B46-1412-H0, F4-B46-1412-H1, RS5123, RS999123
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | Front | Base | 4WD |
- SHOCKS
- FRONT SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, LARGE DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN FEATURES A VULCANIZED RUBBER LOWER BUSHING 15.0" EXTENDED, 9.5" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1450SL IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1994 - Chevrolet S10 Blazer | 4WD |
- with Front Raised Height 0 (in)
- RS5000X
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12474687, 12474688, 12474689, 12474690, 12474691, 12474692, 12474693, 12474694, 12474908, 12474909, 12477880, 12477891, 12477892, 12477893, 12477894, 15023684, 15023686, 15023687...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1994 - Chevrolet S10 Blazer | Front | RWD |
- For PN[K2025/K2026/K2084/K4051/K3018/K3001/K2166/K4089/K4090/K4085/K4086/K2019/K2020/K2085/K2027/K1050/K2088/K2108/K2109/K4052]; w/2.5 - 5.5 in. Lift
- Performance Shock; For PN[K2025/K2026/K2084/K4051/K3018/K3001/K2166/K4089/K4090/K4085/K4086/K2019/K2020/K2085/K2027/K1050/K2088/K2108/K2109/K4052];
- Performance Shock
- Product Attributes:
- Collapsed Length: Oem
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Designed To Work With Fabtech Lift Kits
- Excellent Dampening Capabilities
- High Flow 9 Stage Valving
- Twin Tube Hydraulic Construction
- 9/16 in. Hardened Chrome Piston Rod
- 1 3/8 in. OD Piston
- Closed Cell Foam Insert
- Polyurethane Bushing
- Fabtech Performance Shocks have been designed to work in conjunction with each of our suspension systems, resulting in superior ride control. Features include high velocity 9-stage valving for excellent dampening capabilities and a closed cell insert to reduce shock fade at high speeds.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | Rear | 6 Cyl 4.3L | RWD | 262 |
- For PN[K2114M/K2188M/K2190M/K2194M/K5000M/K5001M/K1005M/K2116M]; w/6 in. Lift
- Stealth Monotube Shock Absorber; For PN[K2114M/K2188M/K2190M/K2194M/K5000M/K5001M/K1005M/K2116M];
- Stealth Monotube Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- 50mm OD Seamless Steel Body
- 46mm High Flow Piston For Best Ride
- Vehicle Specific Valving Designed For Oversized Tires
- Full Floating Piston Separates Gas From Oil
- Consistent Ride
- 14mm Nitrocarb Piston Rod Resists Rock Chips And Rusting
- All Black Finish
- Identifiable Raised Metal Nameplate
- Stealth is the first all black monotube shock absorber, with an identifiable raised metal nameplate, that represents the signature of quality you can rely on for a superior ride at an affordable price. Stealth monotube shocks are built with 46mm diameter high flow piston and vehicle specific valving, for a great ride with oversized tires. All Stealth shock absorbers feature Nitrocarburized piston rods that are superior to chromed rods in durability and corrosion resistance. These Nitrocarb piston rods are finished in matte black for a complete black out shock package.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | Front | 6 Cyl 4.3L | 4WD | 262 |
- Monro-Matic Plus Shock Absorber
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12474687, 12474688, 12474689, 12474690, 12474691, 12474692, 12474693, 12474694, 12474908, 12474909, 12477880, 12477891, 12477892, 12477893, 12477894, 15023684, 15023686, 15023687...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1994 - Chevrolet S10 Blazer | Rear |
- 6.5-7.5 in.; Monotube; 23.82 in. Extended Length; 14.37 Collapsed Length;Front w/6.5 - 7.5 in. Lift
- M1 Shock Absorber; Front; 6.5-7.5 in.; Monotube; 23.82 in. Extended Length; 14.37 Collapsed Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 14.370 In.
- Shock Stroke: 9.450 In.
- WARNING CA Proposition 65: No
- Extended Length: 23.820 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and glavanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1994 - Chevrolet S10 Blazer | Front | 4WD |
- Monro-Matic Plus Shock Absorber
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12474687, 12474688, 12474689, 12474690, 12474691, 12474692, 12474693, 12474694, 12474908, 12474909, 12477880, 12477891, 12477892, 12477893, 12477894, 1440000, 15023684, 15023686...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1994 - Chevrolet S10 Blazer | Front | RWD |
- SHOCKS
- FRONT SHOCK - 2" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 13.3" EXTENDED, 8.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1300SL-1 IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1994 - Chevrolet S10 Blazer | RWD |
- SHOCKS
- FRONT SHOCK - 3" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 12.3" EXTENDED, 8.1" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1200SL-1 IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1994 - Chevrolet S10 Blazer | RWD |
Showing 1 - 10 of 22 products
Loading...