Image
Product
Price
- 6 in. Front Lift; 3 in. Rear Lift; Includes Front Lift Spindles/Coil Springs/Rear Blocks/U-Bolts/Fr./R. MaxTrac Shocks; Supersedes PN[K883053-6] For Non Stabilitrak Models
- Suspension Lift Kit w/Shocks; 6 in. Front Lift; 3 in. Rear Lift; Includes Front Lift Spindles/Coil Springs/Rear Blocks/U-Bolts/Fr./R. MaxTrac Shocks; Supersedes PN[K883053-6];
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height:
- 3 In.
- 6 In.
- Lift/Drop Height:
-
Features:
- Suspension Lift Kit w/Shocks
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 6-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory coil spring with a lifted coil spring and Maxtrac twin-tube shocks to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | V | - | 6 Cyl 4.0L | Tremor | RWD | 245 |
- 6 in. Front Lift; 3 in. Rear Lift; Includes Front Lift Spindles/Coil Springs/Rear Blocks/U-Bolts/Fr./R. MaxTrac Shocks; Supersedes PN[K883053-6] For Non Stabilitrak Models
- Suspension Lift Kit w/Shocks; 6 in. Front Lift; 3 in. Rear Lift; Includes Front Lift Spindles/Coil Springs/Rear Blocks/U-Bolts/Fr./R. MaxTrac Shocks; Supersedes PN[K883053-6];
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height:
- 3 In.
- 6 In.
- Lift/Drop Height:
-
Features:
- Suspension Lift Kit w/Shocks
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 6-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory coil spring with a lifted coil spring and Maxtrac twin-tube shocks to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | V | - | 6 Cyl 4.0L | Tremor | RWD | 245 |
- 5 in. Front Lift; 3 in. Rear Lift; Includes Front Spindles/Front Torsion Keys/Rear Blocks And U-Bolts/Rear Shocks; Supersedes PN[KX883053] For Non Stabilitrak Models
- Suspension Lift Kit w/Shocks; 5 in. Front Lift; 3 in. Rear Lift; Includes Front Spindles/Front Torsion Keys/Rear Blocks And U-Bolts/Rear Shocks; Supersedes PN[KX883053];
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height:
- 3 In.
- 5 In.
- Lift/Drop Height:
-
Features:
- Suspension Lift Kit w/Shocks
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 5-inch lift kit for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac lift torsion key that can prove an additional 1-3 inches. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | V | 2986 | 6 Cyl 3.0L | XL | RWD | 182 |
- 6 in. Front Lift; 3 in. Rear Lift; Includes Front Lift Spindles And Coil Springs/Rear Blocks/U-Bolts/Fr./R. MaxTrac Shocks; Supersedes PN[K883053-4] For Non Stabilitrak Models
- Suspension Lift Kit w/Shocks; 6 in. Front Lift; 3 in. Rear Lift; Includes Front Lift Spindles And Coil Springs/Rear Blocks/U-Bolts/Fr./R. MaxTrac Shocks; Supersedes PN[K883053-4];
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height:
- 3 In.
- 6 In.
- Lift/Drop Height:
-
Features:
- Suspension Lift Kit w/Shocks
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 6-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory coil spring with a lifted coil spring and Maxtrac twin-tube shocks to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | L | - | 4 Cyl 2.3L | XLT | RWD | 140 |
- 3 in. Front; 2 in. Rear Lift; Supersedes PN[KX883032] Please Order By Component Part Number Kit Incl.~PN 1 [843013]/1 [410520]
- Suspension Lift Kit; 3 in. Front; 2 in. Rear Lift; Supersedes PN[KX883032];
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height:
- 2 In.
- 3 In.
- Lift/Drop Height:
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- Suspension Lift Kit, 3 in. Front, 2 in. Rear Lift
Additional Fitment Information:
| Vehicle | Block | CC | Front Spring | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | L | - | Torsion Bar | 4 Cyl 2.3L | XLT | 4WD | 140 |
- 4 in. Front Lift; 2 in. Rear Lift; Front Lift Spindles/Rear Lift Shackles; Supersedes PN[K883032] For Non Stabilitrak Models
- Suspension Lift Kit; 4 in. Front Lift; 2 in. Rear Lift; Front Lift Spindles/Rear Lift Shackles; Supersedes PN[K883032];
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height:
- 2 In.
- 4 In.
- Lift/Drop Height:
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 4-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac lift shackle. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | V | 2986 | 6 Cyl 3.0L | Edge | RWD | 182 |
- 5 in. Lift; Includes Crossmember; Knuckles; Skid Plate; Diff/Torsion Drop Brkt; Swaybar Links; Brake Lines; Blocks; Front and Rear Premium N3 Shocks
- Suspension Lift Kit w/Shocks; 5 in. Lift; Includes Crossmember; Knuckles; Skid Plate; Diff/Torsion Drop Brkt; Swaybar Links; Brake Lines; Blocks; Front and Rear Premium N3 Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: No
-
Features:
- Lifts And Levels Front w/Rear
- Increased Ground Clearance
- Includes Upper Control Arm Cam Bolts For Easier Alignment
- Give your Ford Ranger a commanding, aggressive appearance and impressive off-road capabilities with Rough Countrys 5in Suspension Lift! This all-inclusive kit comes with everything you need for increased ground clearance and a lifted, leveled stance.Rough Countrys 5in Suspension lift includes front and rear crossmembers and a set of lifted knuckles, offering plenty of ride height to clear up to a 33- in. tire! A set of included, front brake lines and a durable steel skid plate help ensure your Ranger is ready to tackle any terrain with plenty of clearance and protection. For an impressive ride quality both on and off-road, this kit also includes Rough Countrys nitrogen-charged N3 shocks. These 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, and reinforced seals for a long lifespan of smooth performance.This kit requires only minor cutting to install, and features a set of upper control arm cam bolts making it easy to achieve a proper alignment after lifting. Best of all, this kit includes Rough Countrys Lifetime Replacement Guarantee!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | V | 2986 | 6 Cyl 3.0L | Tremor | 4WD | 182 |
- 5 in. Front Lift; 3 in. Rear Lift; Includes Front Spindles/Front Torsion Keys/Rear Blocks And U-Bolts/Rear Shocks; Supersedes PN[KX883053] For Non Stabilitrak Models
- Suspension Lift Kit w/Shocks; 5 in. Front Lift; 3 in. Rear Lift; Includes Front Spindles/Front Torsion Keys/Rear Blocks And U-Bolts/Rear Shocks; Supersedes PN[KX883053];
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height:
- 3 In.
- 5 In.
- Lift/Drop Height:
-
Features:
- Suspension Lift Kit w/Shocks
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 5-inch lift kit for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac lift torsion key that can prove an additional 1-3 inches. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | V | 2986 | 6 Cyl 3.0L | XL | RWD | 182 |
- 3 in. Front; 2 in. Rear Lift; Supersedes PN[KX883032] Please Order By Component Part Number Kit Incl.~PN 1 [843013]/1 [410520]
- Suspension Lift Kit; 3 in. Front; 2 in. Rear Lift; Supersedes PN[KX883032];
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height:
- 2 In.
- 3 In.
- Lift/Drop Height:
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- Suspension Lift Kit, 3 in. Front, 2 in. Rear Lift
Additional Fitment Information:
| Vehicle | Block | CC | Front Spring | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | L | - | Torsion Bar | 4 Cyl 2.3L | XLT | 4WD | 140 |
- 4 in. Front Lift; 2 in. Rear Lift; Front Lift Spindles/Rear Lift Shackles; Supersedes PN[K883032] For Non Stabilitrak Models
- Suspension Lift Kit; 4 in. Front Lift; 2 in. Rear Lift; Front Lift Spindles/Rear Lift Shackles; Supersedes PN[K883032];
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height:
- 2 In.
- 4 In.
- Lift/Drop Height:
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 4-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac lift shackle. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Ranger | V | 2986 | 6 Cyl 3.0L | Edge | RWD | 182 |
Showing 1 - 10 of 12 products
Loading...