2004 Toyota 4Runner Suspension Lift Kit Parts
Choose your Engine for your 2004 Toyota 4Runner
Image
Product
Price
- Set of 4 Shocks + 2 Front Springs
- Front: +2.75 in. Rear: +0-1 in.
- Set of 4 Shocks + 2 Front Springs
- EPS: 1155
-
Features:
- Matched system of lift springs and shocks designed for increased travel and performance
- Provides balanced ride quality, control and off-road capability
- Manufactured by Eibach using off-road race spring technology and OE quality standards
- Shocks individually tested for matched performance in each corner
- Made In U.S.A.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Toyota 4Runner |
- Set of 4 Shocks + 2 Front Springs
- with X-REAS Front: +2.75 in. Rear: +0-1 in.
- Set of 4 Shocks + 2 Front Springs
- EPS: 2144
-
Features:
- Matched system of lift springs and shocks designed for increased travel and performance
- Provides balanced ride quality, control and off-road capability
- Manufactured by Eibach using off-road race spring technology and OE quality standards
- Shocks individually tested for matched performance in each corner
- Made In U.S.A.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Toyota 4Runner |
- 0" - 3.5" Lift
- 2003-2009 4RUNNER/2007-2009 FJ CRUISER 0-3.5" LIFT STAGE 2 SUSPENSION SYSTEM WITH BILLET UCA
- 03-09 4RUNNER/FJ 0-3.5" STAGE 2 SUSPENSION SYSTEM W BILLET UCA
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- California Prop 65 Warning: Yes
- Maximum Lift: 3.5
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers provide 0-3.5" of front lift height
- Extended Travel coilovers matched with ICON UCalifornia provides increased front droop travel
- 6061 aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
- Bolt-on system means no cutting or welding necessary for install
- This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota 4Runner | Front and Rear |
- 0" - 3.5" Lift
- 2003-2009 4RUNNER/2007-2009 FJ CRUISER 0-3.5" LIFT STAGE 2 SUSPENSION SYSTEM WITH BILLET UCA
- 03-09 4RUNNER/FJ 0-3.5" STAGE 2 SUSPENSION SYSTEM W BILLET UCA
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- California Prop 65 Warning: Yes
- Maximum Lift: 3.5
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers provide 0-3.5" of front lift height
- Extended Travel coilovers matched with ICON UCalifornia provides increased front droop travel
- 6061 aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
- Bolt-on system means no cutting or welding necessary for install
- This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota 4Runner | Front and Rear |
- 2003-18 TOYOTA 4RUNNER/FJ 3'' Front with 2'' Rear SST Lift Kit
- 3 in. Front/2 in. Rear Lift; Includes Strut Extensions; Front Differential Drop Brackets; Front Skid Plate Spacers; Rear Spring Spacers; All Hardware;
- ReadyLIFT 2003-2018 TOYOTA 4RUNNER/FJ 3'' Front with 2'' Rear SST Lift Kit
- "SST - 3"" Lift Kit"
- Product Attributes:
- California Proposition 65: Warning: This Product Containes A Chemical Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Toyota 4Runner |
- 3 in. Lift Includes The Following Parts~Necessary Installation Hardware~Coil Springs~Strut Extensions~Shock Mounts
- X-REAS Series II Suspension Lift Kit; 3 in. Lift;
- X-REAS Series II Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- Transform your 4-Runner with Rough Countrys 3- in. Series-II Lift for 03-09 Toyota 4-Runners equipped with factory X-REAS Shocks. This easy-to-install kit gives you increased ground clearance and killer good looks while maintaining the superb ride quality of Toyotas X-Relative Absorber System.This kit includes a set of lifted coil springs and strut extensions to provide enough ride height to run larger wheels and tires. With a 100% bolt-on installation process, this kit is easy to install in a home garage with common tools. Includes Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Toyota 4Runner | V | 4663 | 8 Cyl 4.7L | 285 |
- 3 in. Lift Only Fits Models w/X-REAS System~Install Time 2-4 Hours~Includes The Following Parts~Necessary Installation Hardware~Coil Springs~Strut Extensions~Shock Mounts
- X-REAS Series II Suspension Lift Kit; 3 in. Lift;
- X-REAS Series II Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- Transform your 4-Runner with Rough Countrys 3- in. Series-II Lift for 03-09 Toyota 4-Runners equipped with factory X-REAS Shocks. This easy-to-install kit gives you increased ground clearance and killer good looks while maintaining the superb ride quality of Toyotas X-Relative Absorber System.This kit includes a set of lifted coil springs and strut extensions to provide enough ride height to run larger wheels and tires. With a 100% bolt-on installation process, this kit is easy to install in a home garage with common tools. Includes Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2004 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | 4WD | 241 |
- 3 in. Lift; Includes Front Strut Ext.; Rear Shock Relocation Bracket; Lifted Coil Springs; Hardware; Red Only Fits Models w/X-REAS System
- Series II Suspension Lift System; 3 in. Lift; Includes Front Strut Ext.; Rear Shock Relocation Bracket; Lifted Coil Springs; Hardware; Red;
- Series II Suspension Lift System
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- Transform your 4-Runner with Rough Countrys 3- in. Series-II Lift for 03-09 Toyota 4-Runners equipped with factory X-REAS Shocks. This easy-to-install kit gives you increased ground clearance and killer good looks while maintaining the superb ride quality of Toyotas X-Relative Absorber System.This kit includes a set of lifted coil springs and strut extensions to provide enough ride height to run larger wheels and tires. With a 100% bolt-on installation process, this kit is easy to install in a home garage with common tools. Includes Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2004 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | 4WD | 241 |
- 2 in. Lift Includes The Following Parts~Necessary Installation Hardware~Coil Spring Spacers~Strut Extensions
- Suspension Lift Kit; 2 in. Lift;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- No Need To Disassemble Your Struts To Install
- Transform your 4-Runner with Rough Countrys 2- in. Lift for 03-09 Toyota 4-Runners. This easy-to-install kit gives you increased ground clearance and killer good looks while maintaining the superb ride quality. This kit includes a set of lifted coil spring spacers and strut extensions to provide enough ride height to run larger wheels and tires. With a 100% bolt-on installation process, this kit is easy to install in a home garage with common tools. Includes Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2004 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | 4WD | 241 |
- 3 in. Lift; Includes Front Strut Ext.; Rear Coil Spring Spacers; Hardware; Rear Premium N3 Shocks
- Suspension Lift Kit w/Shocks; 3 in. Lift; Includes Front Strut Ext.; Rear Coil Spring Spacers; Hardware; Rear Premium N3 Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- Rear Shocks Are Manufactured w/Recoil Cut-Off Construction
- The Toyota 4Runner is one of the best-looking and most capable 4wd SUVs on the market. Transform your Toyota with Rough Countrys 3- in. Lift for 10-18 Toyota 4-Runners! This easy-to-install kit gives you increased ground clearance and killer good looks while providing a level look from front to rear.This kit includes a set of lifted coil spring spacers and strut extensions to provide enough ride height to run larger wheels and tires. A set of rear nitrogen-charged N3 shocks offer an incredible balance of on and off-road ride quality.With a 100% bolt-on installation process, this kit is easy to install in a home garage with common tools. Includes Rough Countrys Lifetime Replacement Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | 241 |
Showing 1 - 10 of 48 products
Loading...