2007 GMC Sierra 3500 Classic Suspension Lift Kit Parts
Choose your Engine for your 2007 GMC Sierra 3500 Classic
Image
Product
Price
- 2001-2006 Chevy Silverado 3500 4x4-6in. Lift Kit (w/1-piece sub frame) by (No Sh
- 6 in. Front/4 in. Rear Lift Differential Relocation Bracket/U-Bolts/Axle Spacers/Blocks~For Use w/33 in. X 12.50 in. Tires~Includes Sub Frame/Lateral Compression Arms And Mounts/Knuckles~Requires New Rims With 4.5 in. Backspacing Or Less~Spacer Sleeve/Hardware Bag~Torsion Bar Relocation Bracket/Carrier Bearing Relocation Braket
- Lift kits are designed to add additional height to your truck or SUV to increase fender clearance and allow for larger tires. Tuff Country EZ-Ride Suspension has been producing suspension lift kits since 1988. All Tuff Country lif
- Lift Kit
- Product Attributes:
- Lift/Drop Height:
- 4 In.
- 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- Lift/Drop Height:
-
Features:
- Will Not Shortchange You On Critical Components
- Making The Install Safe And Effective
- Fantastic Ride Quality
- Designed To Replicate Your Factory Ride
- No Sacrificing Off Road Durability And Performance
- Gives You The Best Of Both Worlds
- Limited Lifetime Warranty
- Lift kits are designed to add additional height to your truck or SUV to increase fender clearance and allow for larger tires. Tuff Country EZ-Ride Suspension has been producing suspension lift kits since 1988. All Tuff Country lift kits are engineered for the finest quality at an affordable price. Simple installation and a great ride are a trademark of the our kits. All lift kits are backed by a limited lifetime warrantry.
Additional Fitment Information:
| Vehicle | Block | CC | Bed | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2007 - GMC Sierra 3500 Classic | V | - | Fleetside | 8 Cyl 8.1L | 4WD | 496 |
- 2001-2006 Chevy Silverado 3500 4x4-6in. Lift Kit (w/1-piece sub frame) by (No Sh
- 6 in. Front/4 in. Rear Lift Requires New Rims With 4.5 in. Backspacing Or Less~Differential Relocation Bracket/U-Bolts/Axle Spacers/Blocks~Includes Sub Frame/Lateral Compression Arms And Mounts/Knuckles~Torsion Bar Relocation Bracket/Carrier Bearing Relocation Braket~Spacer Sleeve/Hardware Bag~For Use w/33 in. X 12.50 in. Tires
- Lift kits are designed to add additional height to your truck or SUV to increase fender clearance and allow for larger tires. Tuff Country EZ-Ride Suspension has been producing suspension lift kits since 1988. All Tuff Country lif
- Lift Kit
- Product Attributes:
- Lift/Drop Height:
- 4 In.
- 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- Lift/Drop Height:
-
Features:
- Will Not Shortchange You On Critical Components
- Making The Install Safe And Effective
- Fantastic Ride Quality
- Designed To Replicate Your Factory Ride
- No Sacrificing Off Road Durability And Performance
- Gives You The Best Of Both Worlds
- Limited Lifetime Warranty
- Lift kits are designed to add additional height to your truck or SUV to increase fender clearance and allow for larger tires. Tuff Country EZ-Ride Suspension has been producing suspension lift kits since 1988. All Tuff Country lift kits are engineered for the finest quality at an affordable price. Simple installation and a great ride are a trademark of the our kits. All lift kits are backed by a limited lifetime warrantry.
Additional Fitment Information:
| Vehicle | Block | CC | Bed | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2007 - GMC Sierra 3500 Classic | V | - | Fleetside | 8 Cyl 8.1L | 4WD | 496 |
- Black; Box 1 of 2; For 6 in. Lift; For PN[K1014/K1014M/K1014DL]
- Component Box; Black; Box 1 of 2; For 6 in. Lift; For PN[K1014/K1014M/K1014DL];
- Component Box
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Sierra 3500 Classic |
- Box 1 of 2; For 6 in. Lift; For PN[K1045/K1045M/K1045DL] Includes Front Differential Drop Brackets/Skid Plate/CV Spacers~Carrier Bearing Drop Brackets/Steering Knuckles~Torsion Bar Relocation Bracket
- Component Box; Box 1 of 2; For 6 in. Lift; For PN[K1045/K1045M/K1045DL];
- Component Box
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Sierra 3500 Classic |
- Black; Box 2 of 2; For 6 in. Lift; For PN[K1014/K1014M/K1014DL] Tab Nut And Bolt/Brackets/Bump Stop Spacers/U-Bolts~Includes Crossmembers/Support Tube/Impact Strut/Rear Mount
- Component Box; Black; Box 2 of 2; For 6 in. Lift; For PN[K1014/K1014M/K1014DL];
- Component Box
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Sierra 3500 Classic |
- Box 2 of 2; For 6 in. Lift; For PN[K1045/K1045M/K1045DL]
- Component Box; Box 2 of 2; For 6 in. Lift; For PN[K1045/K1045M/K1045DL];
- Component Box
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Sierra 3500 Classic |
- w/Stealth Monotube Shocks; 6 in. Lift Requires Exhaust Modification~6 in. Lift Use 315/70R17 Tire w/17x9 Wheel w/4.625 in. BS w/Minor Trimming~6 in. Lift Use 325/65R18 Tire w/18x9 Wheel w/5 in. BS w/Minor Trimming~If Equipped w/17 in. Factory Wheels Must Use 17 in. Or Larger Aftermarket~6 in. Lift Use 315/75R16 Tire w/16x8 Wheels w/4.625 in. BS w/Minor Trimming~Will Not Fit Vehicles w/Quadrasteer~6 in. Lift Use 35/12.50R20 Tire w/20X8.5 Wheels w/4.625 BS w/Minor Trim~Can Not Use OEM Wheel And Tire~May Require Driveshaft Modification~Welding Required~Includes Front Differential Drop Brackets/Skid Plate/CV Spacers~Front And Rear Shocks/All Required Hardware~Spindles/Sway Bar Link Kit/Front Bump Stop Brackets/4 in. Blocks~Weld-In Plate/Carrier Bearing Drop Bracket/Torsion Bar Drop Bracket~Crossmembers And Support Tube/U-Bolts
- Performance Lift System w/Shocks; w/Stealth Monotube Shocks; 6 in. Lift;
- Performance Lift System w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Everything You Will Need To Lift Your Vehicle
- No Driveshaft Change Required For Auto Trac
- Increased Caster For More Control
- Retains Factory Steering Centerlink
- Retains Factory Upper Control Arms
- Quick No Weld Installation
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Additional Fitment Information:
| Vehicle | Block | CC | Bed | Engine | CID |
|---|---|---|---|---|---|
| 2007 - GMC Sierra 3500 Classic | V | 6599 | Fleetside | 8 Cyl 6.6L | 403 |
- w/DLSS Shocks; 6 in. Lift Requires Exhaust Modification~6 in. Lift Use 315/70R17 Tire w/17x9 Wheel w/4.625 in. BS w/Minor Trimming~6 in. Lift Use 325/65R18 Tire w/18x9 Wheel w/5 in. BS w/Minor Trimming~If Equipped w/17 in. Factory Wheels Must Use 17 in. Or Larger Aftermarket~6 in. Lift Use 315/75R16 Tire w/16x8 Wheels w/4.625 in. BS w/Minor Trimming~Will Not Fit Vehicles w/Quadrasteer~6 in. Lift Use 35/12.50R20 Tire w/20X8.5 Wheels w/4.625 BS w/Minor Trim~Can Not Use OEM Wheel And Tire~May Require Driveshaft Modification~Welding Required~Includes Front Differential Drop Brackets/Skid Plate/CV Spacers~Front And Rear Shocks/All Required Hardware~Spindles/Sway Bar Link Kit/Front Bump Stop Brackets/4 in. Blocks~Weld-In Plate/Carrier Bearing Drop Bracket/Torsion Bar Drop Bracket~Crossmembers And Support Tube/U-Bolts
- Performance Lift System w/Shocks; w/DLSS Shocks; 6 in. Lift;
- Performance Lift System w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Everything You Will Need To Lift Your Vehicle
- No Driveshaft Change Required For Auto Trac
- Increased Caster For More Control
- Retains Factory Steering Centerlink
- Retains Factory Upper Control Arms
- Quick No Weld Installation
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software; fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.
Additional Fitment Information:
| Vehicle | Block | CC | Bed | Engine | CID |
|---|---|---|---|---|---|
| 2007 - GMC Sierra 3500 Classic | V | 6599 | Fleetside | 8 Cyl 6.6L | 403 |
- w/Performance Shocks; 6 in. Lift Requires Exhaust Modification~6 in. Lift Use 315/70R17 Tire w/17x9 Wheel w/4.625 in. BS w/Minor Trimming~6 in. Lift Use 325/65R18 Tire w/18x9 Wheel w/5 in. BS w/Minor Trimming~If Equipped w/17 in. Factory Wheels Must Use 17 in. Or Larger Aftermarket~6 in. Lift Use 315/75R16 Tire w/16x8 Wheels w/4.625 in. BS w/Minor Trimming~Will Not Fit Vehicles w/Quadrasteer~6 in. Lift Use 35/12.50R20 Tire w/20X8.5 Wheels w/4.625 BS w/Minor Trim~Can Not Use OEM Wheel And Tire~May Require Driveshaft Modification~Welding Required~Includes Front Differential Drop Brackets/Skid Plate/CV Spacers~Front And Rear Shocks/All Required Hardware~Spindles/Sway Bar Link Kit/Front Bump Stop Brackets/4 in. Blocks~Weld-In Plate/Carrier Bearing Drop Bracket/Torsion Bar Drop Bracket~Crossmembers And Support Tube/U-Bolts
- Performance Lift System w/Shocks; w/Performance Shocks; 6 in. Lift;
- Performance Lift System w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Everything You Will Need To Lift Your Vehicle
- No Driveshaft Change Required For Auto Trac
- Increased Caster For More Control
- Retains Factory Steering Centerlink
- Retains Factory Upper Control Arms
- Quick No Weld Installation
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software; fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.
Additional Fitment Information:
| Vehicle | Block | CC | Bed | Engine | CID |
|---|---|---|---|---|---|
| 2007 - GMC Sierra 3500 Classic | V | 6599 | Fleetside | 8 Cyl 6.6L | 403 |
- w/DLSS Shocks; 6 in. Lift Dually Bed Includes Differential Drop Brackets/Skid Plate/Sway Bar Links~Front And Rear Shocks/All Required Hardware~Carrier Bearing Drop Bracket/Weld-In Plate/CV Spacer/Spindles~Shock Spacer/Torsion Bar Relocator/Crossmembers And Support Tube~E-Brake Bracket/4 in. Block/U-Bolt
- Raised Torsion Suspension Lift System; w/DLSS Shocks; 6 in. Lift;
- Raised Torsion Suspension Lift System
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- The All New RTS™ Raised Torsion Suspension System Utilizes
- Patent Pending Torsion Bar Brackets That Keep The Torsion Bars
- Raised Up In The Stock Location
- This Feature Provides Superior Ground Clearance At The Frame
- As There Is No Torsion Bars Hanging Down To Become High
- Centered On Or Damaged When Offroading
- This Industry Leading System Rewrites How An IFS Suspension
- System Should Function For Ultimate Offroad Use With Great
- Highway Manners
- Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.
Additional Fitment Information:
| Vehicle | Block | CC | Bed | Engine | CID |
|---|---|---|---|---|---|
| 2007 - GMC Sierra 3500 Classic | V | 6599 | Fleetside | 8 Cyl 6.6L | 403 |
Showing 1 - 10 of 14 products
Loading...