2007 Toyota Tacoma Suspension Shock Absorber Parts
Choose your Submodel for your 2007 Toyota Tacoma
Image
Product
Price
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 0-1.5"
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 600.3
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 361.1
- Boot Included: No
- Lower Mount Type: Eye 12mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-242379, 25-242539
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2007 - Toyota Tacoma | Rear | Base | 4WD |
- B6 4600 - Suspension Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Boot Included: Blue Straight
- Internal Design: Monotube
- Lower Mount Type: Eye 14.2mm
- Upper Mount Type: Stem
- Reservoir: No
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body (non-coilover)
- Body Diameter (ID): 46mm
- Spring Seat Included: Yes
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-125130, 24-188401, 48510-09L80, 48510-09L81, 48510-09L90, 48510-09S50, 48510-09U50, 48510-09U60, 48510-09U61, 48510-69525, 48510-69675, 48510-80086, 48510-80087, 48510-80269, 48510-80270, 48510-80314, 48510-80315, 48510-80328...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2007 - Toyota Tacoma | Front | Base | 4WD |
- B8 5100-Shock Absorber
- For Rear Lifted Height: 0-1"
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 14.020 In.
- 356mm
- Upper Mount Type: Stem
- Extended Length (MM): 582.7
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 356.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12mm
- Shock Stroke: 8.920 In.
- Adjustable Damping: Non-adjustable
- Extended Length:
- 22.940 In.
- 582.7mm
- Body Diameter (ID): 46mm
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24186728, 631062, BE5-C476, F4-BE5-C476-H0
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2007 - Toyota Tacoma | Rear | Base | 4WD |
- B6 4600-Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- WARNING CA Proposition 65: Yes
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Boot Included: Blue Straight
- Lower Mount Type: Eye 12mm
- Adjustable Damping: Non-adjustable
- Adjustable Length: No
-
Features:
- Bilstein 4600 Series
- Monotube Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Performance Even When Towing Heavy Loads
- Vehicle Specific Ride Tuning
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24186056, 322518, 48530-09B50, 48530-09Q40, 48530-09Q92, 48530-A9340, 48530-A9680, 922518, 930647, 980-24-670, BE5-C515, F4-BE5-C515-H0, MX6134, RS5319, RS7319, RS999319, ZX2012
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2007 - Toyota Tacoma | Rear | Base | 4WD |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Front Lift Height: 0-2.5"
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 573.7
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- Collapsed Length (MM): 432.5
- Boot Included: Black Straight
- Lower Mount Type: Eye 14.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-239370
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2007 - Toyota Tacoma | Front | Base | 4WD |
- B6 4600-Shock Absorber
- Supersedes PN[F4-BE5-C515-H0];w/0 in. Lift/Drop;
- 46mm Monotube Shock Absorber
- 4600 Series Shock Absorber
- Product Attributes:
- Boot Included: Blue Straight
- Internal Design: Monotube
- Lower Mount Type: Eye 12mm
- Upper Mount Type: Stem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Adjustable Length: No
-
Features:
- Bilstein 4600 Series
- Monotube Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Performance Even When Towing Heavy Loads
- Vehicle Specific Ride Tuning
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2007 - Toyota Tacoma | V | 3956 | Rear | 6 Cyl 4.0L | Pre Runner | 241 |
- B8 5100-Shock Absorber
- Ride Height Adjustable;w/0 - 1 in. Lift;
- 46mm Monotube Shock Absorber
- B8 5100 Shock Absorber
- Product Attributes:
- Internal Design: Monotube
- Collapsed Length:
- 14.020 In.
- 356mm
- Upper Mount Type: Stem
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12mm
- Shock Stroke: 8.920 In.
- Extended Length:
- 22.940 In.
- 582.7mm
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2007 - Toyota Tacoma | V | 3956 | Rear | 6 Cyl 4.0L | Pre Runner | 241 |
- PRO-TRUCK SPORT SHOCK (Single Rear for Lifted Suspensions 0-1.5")
- Rear: +0-1.5"
- EPS: 1526
- Product Attributes:
- (WSM) Web Category Description: Performance Shocks
- (WSM) Clean Prod Desc: Pro-truck-sport-shock
- (WSM) Category Display Order: 493
-
Features:
- Performance Shock Absorber - Precision Engineered for Street and Off-Road Performance.
- Can accommodate Lifted Suspensions 0-1.5".
- Monotube-High Pressure Design, Heavy Duty 46mm Piston, Nitro Coated Shaft.
- Durable, Zinc Coated, Weather Resistant Shock Bodies.
- Made in U.S.A.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2007 - Toyota Tacoma | Rear | Pre Runner | RWD |
- PRO-TRUCK SPORT SHOCK (Single Rear for Lifted Suspensions 0-1.5")
- Rear: +0-1.5"
- EPS: 1525
- Product Attributes:
- (WSM) Web Category Description: Performance Shocks
- (WSM) Clean Prod Desc: Pro-truck-sport-shock
- (WSM) Category Display Order: 493
-
Features:
- Performance Shock Absorber - Precision Engineered for Street and Off-Road Performance.
- Can accommodate Lifted Suspensions 0-1.5".
- Monotube-High Pressure Design, Heavy Duty 46mm Piston, Nitro Coated Shaft.
- Durable, Zinc Coated, Weather Resistant Shock Bodies.
- Made in U.S.A.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2007 - Toyota Tacoma | Rear | 4WD |
- 2 Pc.; w/High Performance Coils; Fully Adjustable From 0-2 in. Of Lift; Direct Bolt On;w/2.5 in. Lift;
- Factory Replacement Coil-Over Shocks; 2 Pc.; w/High Performance Coils; Fully Adjustable From 0-2 in. Of Lift; Direct Bolt On;
- Factory Replacement Coil-Over Shocks
- Product Attributes:
- Shock Stroke: 2.000 In.
-
Features:
- Coil Over
- Factory Replacement Coil-Over Shocks; w/High Performance Coils; Fully Adjustable From 0-2 in. Of Lift; Direct Bolt On
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Toyota Tacoma | Front | Pre Runner |
Showing 1 - 10 of 119 products
Loading...