2010 Pontiac G6 Suspension Control Arm and Ball Joint Assembly Parts
Image
Product
Price
- Control Arm and Ball Joint Assembly
- Kit Contains FRONT BUSHING; Use to depletion, then use CK621201; Problem Solver - Powdered Metal Gusher Bearing For Better Lubrication
- MOOG CK620179 Control Arm and Ball Joint Assembly
- MOOG Chassis Suspension Control Arm and Ball Joint Assembly
- MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
This Part Fits the Following OEM/Substitute Numbers:
15292911, 22730775, 22730777, 260-5874, 507-1393, 520-163, 8896675, CB90203, CMS50122, JTC1536, MS50122
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front Left Lower |
- Control Arm and Ball Joint Assembly
- Kit Contains FRONT BUSHING Premium OE Replacement
- MOOG RK620179 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Pinch
- Control Arm Maximum Length: 11.850
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Gray
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Aluminum
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
10379341, 15292911, 22730775, 22730777, 260-5873, 260-5874, 45D3393, 507-1393, 520-163, 622.62015, 8896675, CB90203, CMS50122, FA4867, FCA1150, JTC1536, MS50122
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front Left Lower |
- Control Arm and Ball Joint Assembly
- Kit Contains FRONT BUSHING Premium OE Replacement
- MOOG RK620180 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Pinch
- Control Arm Maximum Length: 11.850
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Gray
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Aluminum
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
10379342, 15292910, 22730776, 260-5873, 260-5874, 501-1394, 507-1394, 520-164, 88966974, CB90204, CMS50123, FA4868, FCA1151, JTC1541, MS50123
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front Right Lower |
- Contains Front and Rear Bushings
- Transit Auto offers the most comprehensible shock absorber and suspension kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- TQ powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- TQ USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- INCLUDES: 2x Front Lower Top Quality Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Unity Automotive Suspension Strut and Coil Spring Assembly (Both Side) + 2x Front Outer Top Quality Steering Tie Rod End (Both Side) + 2x Front
- Kit variations : KSS-104010
This Part Fits the Following OEM/Substitute Numbers:
11671, 11672, 1333270, 1333270L, 1333270R, 172199, 172200, 182199, 182200, 21100011, 21100012, 22105, 2605873, 2605874, 2653147, 2693396, 2693505, 32105...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front |
- Contains Front and Rear Bushings
- Transit Auto offers the most comprehensible shock absorber and suspension kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- INCLUDES: 2x Front Lower TOR Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Unity Automotive Suspension Strut and Coil Spring Assembly (Both Side) + 2x Front Outer TOR Steering Tie Rod End (Both Side) + 2x Front Inner TOR Steer
- Kit variations : KSS-103995
This Part Fits the Following OEM/Substitute Numbers:
11671, 11672, 1333270, 1333270L, 1333270R, 172199, 172200, 182199, 182200, 21100011, 21100012, 22105, 2605873, 2605874, 2653147, 2693396, 2693505, 32105...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front |
- Contains Front and Rear Bushings
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
- Top Quality
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TQ metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TQ steel composition results in a stronger component
- Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
21100012, 22105, 2605873, 507-1393, 520-163, CB90203, CK620179, CK621201, CMS50122, GS50122, JTC1536, K620179, K621201, MS50122, RK620179, RK621201, TK620179
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front Left Lower |
- Contains Front and Rear Bushings
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
- Top Quality
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TQ metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TQ steel composition results in a stronger component
- Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
21100011, 2605874, 32105, 507-1394, 520-164, CB90204, CK620180, CK621200, CMS50123, GS50123, JTC1541, K620180, K621200, MS50123, RK620180, RK621200, TK620180
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front Right Lower |
- Contains Front and Rear Bushings
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
21100011, 2605874, 32105, 507-1394, 520-164, CB90204, CK621200, CMS50123, GS50123, JTC1541, K620180, K621200, MS50123, RK620180, RK621200, TK620180
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front Right Lower |
- Contains Front and Rear Bushings
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
21100012, 22105, 2605873, 507-1393, 520-163, CB90203, CK621201, CMS50122, GS50122, JTC1536, K620179, K621201, MS50122, RK620179, RK621201, TK620179
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Pontiac G6 | Front Left Lower |
Showing 1 - 9 of 9 products
Loading...