Image
Product
Price
- B12 (Special)-Suspension Kit
- 1.45-2 in. Lift; Black w/Heavy Load Package~ w/400 lbs Constant Weight
- Rear Suspension Kit
- B12 Special Suspension Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Kit Contents: Pair Of Coil Springs
-
Features:
- Designed To Alter Vehicles Ride Height For Optimum Performance
- Different Technologies Utilized To Achieve Optimum Ride Height
- The Perfect Combo Of Suspension Dynamics
- Quality And Aesthetics
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Toyota 4Runner | Rear | SR5 |
- B12 (Special)-Suspension Kit
- 1.5-2 in. Lift; Black
- Rear Suspension Kit
- B12 Special Suspension Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Kit Contents: Pair Of Coil Springs
-
Features:
- Designed To Alter Vehicles Ride Height For Optimum Performance
- Different Technologies Utilized To Achieve Optimum Ride Height
- The Perfect Combo Of Suspension Dynamics
- Quality And Aesthetics
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Toyota 4Runner | Rear | Trail |
- PRO-TRUCK LIFT SYSTEM (Stage 1)
- Front: +2.75 in Rear: +1.0 in
- EPS: 2252
- Product Attributes:
- (WSM) Web Category Description: Pro-truck Lift System
- (WSM) Clean Prod Desc: Pro-truck-lift-system
- (WSM) Category Display Order: 499
-
Features:
- Matched system of lift springs and shocks designed for increased travel and performance
- Provides balanced ride quality, control and off-road capability
- Manufactured by Eibach using off-road race spring technology and OE quality standards
- Shocks individually tested for matched performance in each corner
- Made In U.S.A.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2010 - Toyota 4Runner | RWD |
- PRO-LIFT-KIT Springs (Rear Springs Only)
- Rear: +1.0 in
- EPS: 2000
- Product Attributes:
- (WSM) Web Category Description: Performance Lift Springs
- (WSM) Clean Prod Desc: Pro-lift-kit
- (WSM) Category Display Order: 490
-
Features:
- Increased Ground Clearance.
- More Fender Clearance for Larger Wheels and Tires.
- Precision Engineered for Improved Off-Road Capability.
- Excellent On-Road Stability and Handling.
- Made in U.S.A.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2010 - Toyota 4Runner | Rear | 4WD |
- PRO-TRUCK LIFT SYSTEM (Stage 1)
- Front: +2.75 in Rear: +1.0 in
- EPS: 2000
- Product Attributes:
- (WSM) Web Category Description: Pro-truck Lift System
- (WSM) Clean Prod Desc: Pro-truck-lift-system
- (WSM) Category Display Order: 499
-
Features:
- Matched system of lift springs and shocks designed for increased travel and performance
- Provides balanced ride quality, control and off-road capability
- Manufactured by Eibach using off-road race spring technology and OE quality standards
- Shocks individually tested for matched performance in each corner
- Made In U.S.A.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2010 - Toyota 4Runner | 4WD |
- PRO-LIFT-KIT Springs (Rear Springs Only)
- Rear: +1.0 in
- EPS: 2252
- Product Attributes:
- (WSM) Web Category Description: Performance Lift Springs
- (WSM) Clean Prod Desc: Pro-lift-kit
- (WSM) Category Display Order: 490
-
Features:
- Increased Ground Clearance.
- More Fender Clearance for Larger Wheels and Tires.
- Precision Engineered for Improved Off-Road Capability.
- Excellent On-Road Stability and Handling.
- Made in U.S.A.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2010 - Toyota 4Runner | Rear | RWD |
- Black; 2.5 in. Lift; Front And Rear
- Suspension System/Lift Kit; Black; 2.5 in. Lift; Front And Rear;
- Suspension System/Lift Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: (for California Residents) Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- High Density Progressive Polyurethane
- Lifts w/o Sacrificing Ride Quality/Load-Carrying Capacity
- Increase Vehicle Height/Enhances Performance
- Daystar lift kits combine the same proven technology found in our leveling kits, but with the addition of rear lift. Daystar was the first to enter the leveling kit market in 1995. Though there have been companies that have entered the market since, Daystars lift and leveling kits offer many advantages that the others can not claim. Such as No metal-on-metal contact, lifetime warranties, top-mount easy-install design, and they are made in the USA. Daystar lift kits work within the factory suspension design, meaning that we work within the factorys design parameters to achieve an increase in ride height. Because we work within the factory design, there is not a bunch of additional modifications involved that adds complexity and expense to the kit. Everything needed is included in the kit; there is everything you need and nothing you do not. If there are extra items required, such as longer shocks, it is clearly stated in the application description. Daystar lift kits provide both front and rear lift in the 2 to 3 in. range. Front lift is generally the same as with our leveling kits, while rear lift comes in the form of rear coil spring spacers, longer shackles, add-a-leafs, or a block and U-bolt kit. Which method used is spelled out in the application description. Daystars lift kits are the perfect solution for gaining ground clearance and the room to step up a few tire sizes...Do your homework and you will see that we have done ours!
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Toyota 4Runner |
- 10-UP FJ/10-UP 4RUNNER 0-3.5" STAGE 2 SUSPENSION SYSTEM W BILLET UCA
- Rear Raise Height 2 (in) Raises Front 0 (in) - 3.5 (in)
- 2003-2010 4RUNNER/2010-2014 FJ CRUISER 0-3.5" LIFT STAGE 2 SUSPENSION SYSTEM WITH BILLET UCA
- 10-14 FJ/10-UP 4RUNNER 0-3.5" STAGE 2 SUSPENSION SYSTEM W BILLET UCA
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3.5
- Title: 10-up Fj/10-up 4runner 0-3.5" Stage 2 Suspension System W Billet Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers provide 0-3.5" of front lift height
- Extended Travel coilovers matched with ICON UCalifornia provides increased front droop travel
- 6061 aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
- Bolt-on system means no cutting or welding necessary for install
- This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Toyota 4Runner | Front and Rear |
- 2 in. Lift Includes The Following Parts~Necessary Installation Hardware~Strut Extensions~Rear Coil Spring Spacers
- Suspension Lift Kit; 2 in. Lift;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- No Need To Disassemble Your Struts To Install
- Transform your 4-Runner with Rough Countrys 2- in. Lift for 10-20 Toyota 4-Runners. This easy-to-install kit gives you increased ground clearance and killer good looks while maintaining the superb ride quality. This kit includes a set of lifted coil spring spacers and strut extensions to provide enough ride height to run larger wheels and tires. With a 100% bolt-on installation process, this kit is easy to install in a home garage with common tools. Includes Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2010 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | 4WD | 241 |
- 2 in.; Aluminum; Easy Bolt-On Installation
- Suspension Lift Kit; 2 in.; Aluminum; Easy Bolt-On Installation;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- No Need To Disassemble Your Struts To Install
- Spacer Finish: Aluminum
- Transform your 4-Runner with Rough Countrys 2- in. Lift for 10-20 Toyota 4-Runners equipped with factory X-REAS Shocks. This easy-to-install kit gives you increased ground clearance and killer good looks while maintaining the superb ride quality of Toyotas X-Relative Absorber System. This kit includes a set of lifted coil spring spacers and strut extensions to provide enough ride height to run larger wheels and tires. With a 100% bolt-on installation process, this kit is easy to install in a home garage with common tools. Includes Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2010 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | 4WD | 241 |
Showing 1 - 10 of 67 products
Loading...