Image
Product
Price
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Provides 0-2.5" Front Lift
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- PartType: Shocks / Struts
- Collapsed Length (MM): 444.6
- Boot Included: Black Straight
- Lower Mount Type: Eye 14.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Adjustable spring seat offers 0-2.75in of lift, depending on the application
- Practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-196499, 985-62-001
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Toyota 4Runner | Front | SR5 |
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 0-2" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 368.3
- Boot Included: Black Bellows
- Lower Mount Type: Eye 19.25mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
This Part Fits the Following OEM/Substitute Numbers:
25-227611, 25-313154, 56505R, 985-24-117
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2010 - Toyota 4Runner | Rear Left | SR5 | 4WD |
- B8 8100 - Suspension Shock Absorber
- Fits Vehicles With 0.9-2" Rear Lift
- 60mm Shock Absorber
- B8 8100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Body Design: 60mm Id Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 379.5
- Boot Included: No
- Lower Mount Type: Eye 19.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Direct fit for an easy installation
- 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
- 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
- Bilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2010 - Toyota 4Runner | Rear | SR5 | RWD |
- B8 8100 - Suspension Shock Absorber
- Fits Vehicles With 0-2" Rear Lift
- 60mm Shock Absorber
- B8 8100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Body Design: 60mm Id Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 379.5
- Boot Included: No
- Lower Mount Type: Eye 19.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Direct fit for an easy installation
- 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
- 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
- Bilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25001-125, 57810P
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2010 - Toyota 4Runner | Rear | SR5 | 4WD |
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 0.5-2" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 368.3
- Boot Included: Black Bellows
- Lower Mount Type: Eye 19.25mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2010 - Toyota 4Runner | Rear Left | SR5 | RWD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-2" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 378.8
- Boot Included: Black Bellows
- Lower Mount Type: Eye 19.3mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
This Part Fits the Following OEM/Substitute Numbers:
33-187174, 985-24-124, RS77305
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2010 - Toyota 4Runner | Rear | SR5 | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0.5-2" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 378.8
- Boot Included: Black Bellows
- Lower Mount Type: Eye 19.3mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2010 - Toyota 4Runner | Rear | SR5 | RWD |
- with Rear Raised Height 0 (in) to 1.5 (in) with Standard Suspension Option
- RS5000X
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4851009S50, 4851009Y70, 4851080086, 4851080087, 4851080229, 4851080230, 4851080269, 4851080270, 4851080314, 4851080315, 4851080328, 4851080329, 4851080396, 4851080397, 4851080494, 4851080495, 4851080497, 4851080498...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Toyota 4Runner | Rear |
- with Rear Raised Height 0 (in) to 1.5 (in) with Standard Suspension Option
- RS9000XL
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4851009S50, 4851009Y70, 4851080086, 4851080087, 4851080229, 4851080230, 4851080269, 4851080270, 4851080314, 4851080315, 4851080328, 4851080329, 4851080396, 4851080397, 4851080494, 4851080495, 4851080497, 4851080498...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Toyota 4Runner | Rear |
- Front; For 6 in. Lift; For PN[K7035DL/K7025DL/K7020DL/K7007DL/K7060DL/K7067DL]; w/6 in. Lift 35/12.50R20 Tires w/20x9 Wheels w/5 in. BS w/Minor Trimming~35/12.50R17 Tires w/17x9 Wheels w/4.75 in. BS w/Minor Trimming~35/12.50R18 Tires w/18x9 Wheels w/4.75 in. BS w/Minor Trimming
- Dirt Logic 2.5 Stainless Steel Coilover Shock Absorber; Front; For 6 in. Lift; For PN[K7035DL/K7025DL/K7020DL/K7007DL/K7060DL/K7067DL];
- Dirt Logic 2.5 Stainless Steel Coilover Shock Absorber
- Product Attributes:
- Shock Stroke: Oem
- Usage: Lifted Trucks
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Outstanding Performance And Longevity
- Billet Aluminum Top Cap And Rod End/Stainless Steel Body
- Urethane Bushings Reduce Noise And Rattle
- Tuned And Custom Fit Per Application
- The best shocks only get better with all new Stainless Steel and Aluminum construction. High grade 304 Stainless Steel shock bodies eclipse all other shocks on the market for maximum corrosion resistance. Each Stainless Steel shock body receives a finely detailed machine finish for a stunning appearance. Dirt Logic Stainless Steel reservoir shocks have been upgraded with black anodized 6061 Aluminum reservoir bodies. This includes both piggyback and remote reservoir shocks. The Aluminum resi construction allows for greater heat dissipation thereby keeping the shock cooler to reduce fade during aggressive offroad use. Finally each Dirt Logic piston rod has been upgraded to a NitroSteel(R) material that is super hard while providing increased corrosion resistance compared to chromed piston rods. Get the finest ride with maximum corrosion resistance only from Dirt Logic shocks. In addition to the specific Dirt Logics for each suspension system, there is also a line of universal Dirt Logic shocks available in reservoir and non-reservoir styles, ranging from 8 to 16 inches of stroke. These universal shocks are sold with universal hardware kits for easy installation. Dirt Logic 2.0 and 2.25 shocks feature urethane bushings in the mounting points to reduce road noise and rattling associated with spherical bearings. Dirt Logic coilover shocks utilize spherical bearings at each end for increased strength along with urethane misalignment cups in the top caps. The misalignment cups keep the road noise transferred through spherical bearings to a minimum. Dirt Logic 2.5 and 4.0 coilover shocks use coil springs made to the highest quality standards possible. All Dirt Logic coils posses the ability to go solid without breaking, settling or bowing. All Dirt Logic coilover shocks come preset with the proper amount of preload so they can be bolted on without any further adjustment necessary. Dirt Logics are available with or without an external reservoir.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Toyota 4Runner | Front | Trail |
Showing 1 - 10 of 45 products
Loading...