Image
Product
Price
- Control Arm and Ball Joint Assembly
- without Aluminum Steering Knuckles Kit Contains BUSHING Forged Steel Control Arm High Utilization Design
- MOOG CK80669 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 13.360
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Bolt In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
- MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
This Part Fits the Following OEM/Substitute Numbers:
10980669, 15096197, 25812725, 260-5507, 45D3592, 507-1300, 521-023, 62266068, 62366068, CB90267, CMK80669, FK80669, JTC1509, MK80669, MS50115
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Left Upper |
- Control Arm and Ball Joint Assembly
- without Aluminum Steering Knuckles Kit Contains BUSHING Forged Steel Control Arm High Utilization Design
- MOOG CK80670 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 13.360
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Bolt In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
- MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
This Part Fits the Following OEM/Substitute Numbers:
10980670, 15096198, 25812726, 260-5508, 45D3593, 507-1301, 521-024, 62266069, 62366069, CB90268, CMK80670, FK80670, JTC1510, MK80670, MS50116
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Right Upper |
- Control Arm and Ball Joint Assembly
- without Aluminum Steering Knuckles Premium OE Replacement Forged Steel Control Arm
- MOOG RK80669 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 13.360
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Bolt In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
10980669, 15096197, 25812725, 260-5507, 45D3592, 507-1300, 521-023, 62266068, 62366068, CB90267, CMK80669, FA4403, FK80669, JTC1509, MK80669, MS50115
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Left Upper |
- Control Arm and Ball Joint Assembly
- without Aluminum Steering Knuckles Non-Adjustable Type Premium OE Replacement Forged Steel Control Arm
- MOOG RK80670 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 13.360
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Bolt In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
10980670, 15096198, 25812726, 260-5508, 45D3593, 507-1301, 521-024, 62266069, 62366069, CB90268, CMK80670, FA4404, FK80670, JTC1510, MK80670, MS50116
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Right Upper |
- Control Arm and Ball Joint Assembly
- Cast Iron Arm without Aluminum Steering Knuckles Includes Bushings Premium OE Replacement
- MOOG RK620888 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 20.410
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
10355407, 15167932, 15948967, 20869199, 20869201, 22952193, 25788110, 25788112, 25788114, 25868821, 25868823, 25997509, 2606064, 26788112, 45D2471, 507-1627, 521-645, 521-957...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Left Lower |
- Control Arm and Ball Joint Assembly
- Cast Iron Arm without Aluminum Steering Knuckles Includes Bushings Premium OE Replacement
- MOOG RK620889 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 20.410
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
10355408, 15167933, 15948968, 20869200, 20869202, 22853474, 22952194, 25788111, 25788113, 25788115, 25868822, 25868824, 258868822, 25997508, 25997510, 2606065, 45D2472, 507-1628...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Right Lower |
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
- Top Quality
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TQ metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TQ steel composition results in a stronger component
- Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
10980669, 21100029, 2605507, 507-1300, 521-023, 96608, CB90267, CK80669, CMK80669, GK80669, JTC1509, K80669, MK80669, RK80669, TK80669
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Left Upper |
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
- Top Quality
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TQ metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TQ steel composition results in a stronger component
- Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
107608, 10980670, 21100030, 2605508, 507-1301, 521-024, CB90268, CK80670, CMK80670, GK80670, JTC1510, K80670, MK80670, RK80670, TK80670
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Right Upper |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
10980669, 21100029, 2605507, 507-1300, 521-023, 96608, CB90267, CK80669, CMK80669, GK80669, JTC1509, K80669, MK80669, RK80669, TK80669
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Left Upper |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
107608, 10980670, 21100030, 2605508, 507-1301, 521-024, CB90268, CK80670, CMK80670, GK80670, JTC1510, K80670, MK80670, RK80670, TK80670
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Right Upper |
Showing 1 - 10 of 14 products
Loading...