Image
Product
Price
- Subframes; Rear Shocks; Box Two Of Three
- Lift Kit-Suspension Component; Subframes; Rear Shocks; Box Two Of Three;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Suspension Component Box
- Suspension Component Box
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Toyota Tundra | 4WD |
- 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks
- Suspension Lift Kit w/Shocks; 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3.5 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 33 in. Tire
- 18 in. Wheel Or Larger With 6.5 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 3.5-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2011 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | RWD | 345 |
- Miscellaneous Brackets And Hardware; Box Three Of Three
- Lift Kit-Suspension Component; Miscellaneous Brackets And Hardware; Box Three Of Three;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Suspension Component Box
- Suspension Component Box
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Toyota Tundra | 4WD |
- 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Fox Rear Shocks
- Lift Kit-Suspension Component; 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Fox Rear Shocks;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 4 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Suspension Lift Kit w/Shocks; 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Fox Rear Shocks
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Toyota Tundra | RWD |
- 6 in. Lift; Includes Spindles w/Brake Lines/Fox 2.0 Coilovers/Rear Blocks/U-Bolts/Carrier Bearing Spacer/Rear Brake Line Brackets
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Spindles w/Brake Lines/Fox 2.0 Coilovers/Rear Blocks/U-Bolts/Carrier Bearing Spacer/Rear Brake Line Brackets;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 6-lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory strut with a Fox fully adjustable Coil-over to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox performance shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2011 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | RWD | 345 |
- 6 in. Front 4 in. Rear Lift; Includes Spindles w/Brake Lines; Strut Spacers; Blocks w/U-Bolts; 2 Rear MaxTrac Shocks
- Suspension Lift Kit w/Shocks; 6 in. Front 4 in. Rear Lift; Includes Spindles w/Brake Lines; Strut Spacers; Blocks w/U-Bolts; 2 Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 35 in. Tire
- 18 in. Wheel Or Larger With 6.5 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 6-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2011 - Toyota Tundra | V | 4608 | 8 Cyl 4.6L | RWD | - |
- 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Maxtrac Shocks
- Lift Kit-Suspension Component; 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Maxtrac Shocks;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 4 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Suspension Lift Kit w/Shocks; 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Maxtrac Shocks
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Toyota Tundra | RWD |
- Rear Raise Height 1.5 (in) Raises Front 1 (in) - 3 (in)
- 2007-2021 TOYOTA TUNDRA 1-3" LIFT STAGE 3 SUSPENSION SYSTEM
- 07-21 TUNDRA 1-3" STAGE 3 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 35" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 20x9" W/ 5.625” Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3.5
- Title: 07-21 Tundra 1-3" Stage 3 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 1-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
- FK rod end bearings for extended longevity and minimal deflection
- 2.5 Aluminum Series rear shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
- Rear expansion pack for 1.5” of lift and better ride quality
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics Toyota Tundra Stage 3 suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 3 system includes vehicle-specific tuned 2.5” coilover shocks featuring internal reservoirs for exceptional cooling properties. These coilovers are also height adjustable from 1-3” of lift over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.5 Aluminum Series VS Smooth Body Series rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2007-2021 Toyota Tundra Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Toyota Tundra | Front and Rear |
- 07-21 TUNDRA 1-3" STAGE 3 SUSPENSION SYSTEM
- 1" - 3" Lift
- 2007-2021 TOYOTA TUNDRA 1-3" LIFT STAGE 3 SUSPENSION SYSTEM
- 07-UP TUNDRA 1-3" STAGE 3 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 35" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 20x9" W/ 5.625” Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3.5
- Title: 07-21 Tundra 1-3" Stage 3 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 1-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
- FK rod end bearings for extended longevity and minimal deflection
- 2.5 Aluminum Series rear shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
- Rear expansion pack for 1.5” of lift and better ride quality
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics Toyota Tundra Stage 3 suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 3 system includes vehicle-specific tuned 2.5” coilover shocks featuring internal reservoirs for exceptional cooling properties. These coilovers are also height adjustable from 1-3” of lift over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.5 Aluminum Series VS Smooth Body Series rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2007-2021 Toyota Tundra Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Toyota Tundra | Front and Rear |
- 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks
- Lift Kit-Suspension Component; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 2 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Suspension Lift Kit w/Shocks; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Toyota Tundra | RWD |
Showing 1 - 10 of 160 products
Loading...