Image
Product
Price
- 2 in. Rear Lift; Includes 3 in. Lift Blocks; U-Bolts; Maxtrac Shocks PN[2900LL] w/Cast Steel Suspension
- Lift Kit-Suspension Component; 2 in. Rear Lift; Includes 3 in. Lift Blocks; U-Bolts; Maxtrac Shocks PN[2900LL];
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 2 In.
-
Features:
- Suspension Lift Kit w/Shocks
- Suspension Lift Kit w/Shocks; 2 in. Rear Lift; Includes 3 in. Lift Blocks; U-Bolts; Maxtrac Shocks PN[2900LL]
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2012 - Chevrolet Silverado 1500 | LT | RWD |
- 4.5 in. Lift; Includes Front Spindles With Brake Lines/Blocks/U-Bolts/Rear Fox Performance Shocks w/Cast Steel Suspension
- Suspension Lift Kit w/Shocks; 4.5 in. Lift; Includes Front Spindles With Brake Lines/Blocks/U-Bolts/Rear Fox Performance Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 4.5 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 4.5-inch lift for the GM Full size platform is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox 2.0 monotube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Silverado 1500 | V | 5328 | 8 Cyl 5.3L | LTZ | RWD | 325 |
- 6 in. Lift; Includes Spindles With Brake Lines/Strut Spacers/Rear Blocks/U-Bolts/Carrier Bearing Spacer/Rear Brake Line Brackets/Rear MaxTrac Shocks w/Cast Steel Suspension
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Spindles With Brake Lines/Strut Spacers/Rear Blocks/U-Bolts/Carrier Bearing Spacer/Rear Brake Line Brackets/Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 33 in. Tire
- 17 in. Wheel Or Larger With 4.625 in. Backspacing Or Less
- Track Width Increases .5 in. Per Side
- The Maxtrac Suspension 6-inch lift for the GM Full size trucks is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Silverado 1500 | V | - | 8 Cyl 4.8L | WT | RWD | 294 |
- 4.5 in. Lift; Includes Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks w/Cast Steel Suspension
- Suspension Lift Kit w/Shocks; 4.5 in. Lift; Includes Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 4.5 In.
- Component Part Numbers: 701345 & 901330
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 33 in. x 12.50 in. Tire
- 17 in. Wheel Or Larger With 4.75 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- The Maxtrac Suspension 4.5-inch lift for the GM Full size platform is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Silverado 1500 | V | - | 8 Cyl 4.8L | LS | RWD | 294 |
- 4 in. Rear Lift; Includes 3 in. Strut Spacers; 4 in. Lift Blocks; U-Bolts; 1 in. Shackles; Maxtrac Shocks PN[2900LL] w/Cast Steel Suspension
- Lift Kit-Suspension Component; 4 in. Rear Lift; Includes 3 in. Strut Spacers; 4 in. Lift Blocks; U-Bolts; 1 in. Shackles; Maxtrac Shocks PN[2900LL];
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 4 In.
-
Features:
- Suspension Lift Kit w/Shocks
- Suspension Lift Kit w/Shocks; 4 in. Rear Lift; Includes 3 in. Strut Spacers; 4 in. Lift Blocks; U-Bolts; 1 in. Shackles; Maxtrac Shocks PN[2900LL]
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2012 - Chevrolet Silverado 1500 | LS | RWD |
- 3 in. Rear Lift; Includes Track Bar Brackets/2 Sway Bar Extensions; 2 Fox Rear Shocks; Rear Coils; All Necessary Hardware w/Cast Steel Suspension
- Lift Kit-Suspension Component; 3 in. Rear Lift; Includes Track Bar Brackets/2 Sway Bar Extensions; 2 Fox Rear Shocks; Rear Coils; All Necessary Hardware;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Suspension Lift Kit w/Shocks; 3 in. Rear Lift; Includes Track Bar Brackets/2 Sway Bar Extensions; 2 Fox Rear Shocks; Rear Coils; All Necessary Hardware
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2012 - Chevrolet Silverado 1500 | LTZ | RWD |
- 7.5 in. Lift; Includes Front Spindles w/Brake Lines/Front Fox 2.0 Coilovers/Blocks/U-Bolts/Rear Shackles/Rear Fox Shocks w/Cast Steel Suspension
- Suspension Lift Kit w/Shocks; 7.5 in. Lift; Includes Front Spindles w/Brake Lines/Front Fox 2.0 Coilovers/Blocks/U-Bolts/Rear Shackles/Rear Fox Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 7.5 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- The Maxtrac Suspension 7.5-inch lift for the GM Full size trucks is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory strut with a Fox fully adjustable Coil-over to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox performance shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Silverado 1500 | V | - | 8 Cyl 4.8L | LT | RWD | 294 |
- Box 1 Of 3; Must Order All 3 Kit Boxes To Complete Kit For Models w/o Magneride~w/Cast Steel Suspension~w/Stamped Steel Suspension
- Lift Kit-Suspension Component; Box 1 Of 3; Must Order All 3 Kit Boxes To Complete Kit;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 7 In.
-
Features:
- Steering Knuckle
- 7 in. Suspension Lift Kit; Box 1 Of 3; Must Order All 3 Kit Boxes To Complete Kit
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2012 - Chevrolet Silverado 1500 | WT | 4WD |
- 3 in. Front Lift; 2 in. Rear Lift; Includes Front Spindles w/Brake Lines/Rear Blocks/Rear U-Bolts/Rear MaxTrac Shocks w/Cast Steel Suspension
- Suspension Lift Kit w/Shocks; 3 in. Front Lift; 2 in. Rear Lift; Includes Front Spindles w/Brake Lines/Rear Blocks/Rear U-Bolts/Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 33 in. Tire
- 17 in. Wheel Or Larger With 4.625 in. Backspacing Or Less
- Track Width Increases .5 in. Per Side
- The Maxtrac Suspension 3-inch lift for the GM Full size platform is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Silverado 1500 | V | 5328 | 8 Cyl 5.3L | LTZ | RWD | 325 |
- 7.5 in. Lift; Includes Front Spindles w/Brake Lines/Front 3 in. Strut Spacers/Rear Blocks/U-Bolts/Shackles/Rear MaxTrac Shocks w/Cast Steel Suspension
- Suspension Lift Kit w/Shocks; 7.5 in. Lift; Includes Front Spindles w/Brake Lines/Front 3 in. Strut Spacers/Rear Blocks/U-Bolts/Shackles/Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 7.5 In.
- Component Part Numbers: 701345 & 901355
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 35 in. x 12.50 in. Tire
- 17 in. Wheel With 4.75 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- The Maxtrac Suspension 7.5-inch lift for the GM Full size trucks is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Silverado 1500 | V | 5328 | 8 Cyl 5.3L | LTZ | RWD | 325 |
Showing 1 - 10 of 171 products
Loading...