2013 Ford Police Interceptor Utility Suspension Control Arm and Ball Joint Assembly Parts
Image
Product
Price
- Front Right Lower Suspension Control Arm and Ball Joint Assembly
- Premium OE Replacement
- MOOG RK622215 Front Right Lower Suspension Control Arm and Ball Joint Assembly for Ford Explorer
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Grease Fitting Included: Yes
- Adjustable: No
- Ball Joint Mounting Type: Press In
- Bushings Included: Yes
-
Features:
- CARBON FIBER BEARINGS -- Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
- HARDENDED TO MAXIMIZE STRENGTH -- Studs are induction hardened to maximize strength, resist breakage and improve fatigue life
- GREASEABLE SOCKET -- Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot seal provides an effective barrier against wear-causing contaminants
- ADDED CORROSION PROTECTION -- Specially-engineered coatings are applied to metal surfaces to inhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS -- Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED -- Comes with all necessary hardware for easy, fast installation
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- QUALITY ASSURANCE -- Laser-etched ID provides visible assurance of genuine MOOG quality
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
2606834, 522-760, 810-498327B, CA14588, CB85434, CB85434PR, CMS40186, GB5Z3078C, GB5Z3078D, GB5Z3078E, GB5Z3078H, GB5Z3078J, TC4036, TC7822
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front Right Lower |
- Front Left Lower Suspension Control Arm and Ball Joint Assembly
- Premium OE Replacement
- MOOG RK622216 Front Left Lower Suspension Control Arm and Ball Joint Assembly for Ford Explorer
- Product Attributes:
- Control Arm Maximum Length: 18.880
- Adjustable: No
- Ball Joint Mounting Type: Press In
- Bushings Included: Yes
-
Features:
- CARBON FIBER BEARINGS -- Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
- HARDENDED TO MAXIMIZE STRENGTH -- Studs are induction hardened to maximize strength, resist breakage and improve fatigue life
- GREASEABLE SOCKET -- Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot seal provides an effective barrier against wear-causing contaminants
- ADDED CORROSION PROTECTION -- Specially-engineered coatings are applied to metal surfaces to inhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS -- Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED -- Comes with all necessary hardware for easy, fast installation
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- QUALITY ASSURANCE -- Laser-etched ID provides visible assurance of genuine MOOG quality
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
2606835, 2606835M, 45D10317, 5072253, 522-759, 62265834, 810-498328B, BB5Z3079A, BB5Z3079B, CA14587, CB85433, CB85433PR, CMS40185, GB5Z3079E, GB5Z3079G, GB5Z3079H, GB5Z3079J, MS40185...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front Left Lower |
- Front Left Lower Suspension Control Arm Ball Joint Assembly For Ford Explorer
- Top Quality Front Left (Driver Side) Lower Suspension Control Arm Ball Joint Assembly 72-CK622216 For Ford Explorer Police Interceptor Utility
- Top Quality
- Product Attributes:
- WebNameEbay4: For Ford Front Left Lower Suspension Control Arm Ball Joint Assembly 72-ck622216
- ComponentsSummaryRegularWithBrands: Top Quality Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryShort: Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryLongWithBrands: 1x Front Left Lower Top Quality Suspension Control Arm And Ball Joint Assembly
- WebNamePlain: Top Quality Front Left (driver Side) Lower Suspension Control Arm Ball Joint Assembly 72-ck622216
- ComponentsSummaryShortWithBrands: Top Quality Suspension Control Arm And Ball Joint Assembly
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Left Lower Suspension Control Arm And Ball Joint Assembly
- WebNameLong: Top Quality Front Left (driver Side) Lower Suspension Control Arm Ball Joint Assembly 72-ck622216 For Ford Explorer Police Interceptor Utility
- WebNameShort: Front Left Lower Suspension Control Arm Ball Joint Assembly 72-ck622216 For Ford Explorer Police
- ComponentsSummaryRegular: Suspension Control Arm And Ball Joint Assembly
- WebNameRegular: Top Quality Front Left (driver Side) Lower Suspension Control Arm Ball Joint Assembly 72-ck622216 For Ford Explorer Police Interceptor Utility
- WebNameEbay2: [front Left Lower] Suspension Control Arm Ball Joint Assembly 72-ck622216 For
- WebNameEbay3: Suspension Control Arm Ball Joint Assembly Front Left Lower 72-ck622216 For Ford
- WebNameEbay: Front Left Lower Suspension Control Arm Ball Joint Assembly For Ford Explorer
-
Features:
- TQ metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TQ steel composition results in a stronger component
- Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : CB85433PR CB85433 MS40185 GS40185 CMS40185 CK622216 K622216 RK622216 2607470 BB5Z3079A GB5Z3079A GB5Z3079C GB5Z3079E GB5Z3079F GB5Z3079G GB5Z3079H TK622216
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
This Part Fits the Following OEM/Substitute Numbers:
2607470, CB85433, CB85433PR, CMS40185, GS40185, RK622216
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front Left Lower |
- Front Right Lower Suspension Control Arm Ball Joint Assembly For Ford Explorer
- Top Quality Front Right (Passenger Side) Lower Suspension Control Arm Ball Joint Assembly 72-CK622215 For Ford Explorer Police Interceptor Utility
- Top Quality
- Product Attributes:
- WebNameEbay4: For Front Right Lower Suspension Control Arm Ball Joint Assembly 72-ck622215
- ComponentsSummaryRegularWithBrands: Top Quality Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryShort: Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryLongWithBrands: 1x Front Right Lower Top Quality Suspension Control Arm And Ball Joint Assembly
- WebNamePlain: Top Quality Front Right (passenger Side) Lower Suspension Control Arm Ball Joint Assembly 72-ck622215
- ComponentsSummaryShortWithBrands: Top Quality Suspension Control Arm And Ball Joint Assembly
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Right Lower Suspension Control Arm And Ball Joint Assembly
- WebNameLong: Top Quality Front Right (passenger Side) Lower Suspension Control Arm Ball Joint Assembly 72-ck622215 For Ford Explorer Police Interceptor Utility
- WebNameShort: Front Right Lower Suspension Control Arm Ball Joint Assembly 72-ck622215 For Ford Explorer Police
- ComponentsSummaryRegular: Suspension Control Arm And Ball Joint Assembly
- WebNameRegular: Top Quality Front Right (passenger Side) Lower Suspension Control Arm Ball Joint Assembly 72-ck622215 For Ford Explorer Police Interceptor Utility
- WebNameEbay2: [front Right Lower] Suspension Control Arm Ball Joint Assembly 72-ck622215 For
- WebNameEbay3: Suspension Control Arm Ball Joint Assembly Front Right Lower 72-ck622215 For
- WebNameEbay: Front Right Lower Suspension Control Arm Ball Joint Assembly For Ford Explorer
-
Features:
- TQ metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TQ steel composition results in a stronger component
- Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : CB85434PR CB85434 MS40186 GS40186 CMS40186 CK622215 K622215 RK622215 2607471 BB5Z3078A GB5Z3078A GB5Z3078B GB5Z3078C GB5Z3078D GB5Z3078E TK622215
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
This Part Fits the Following OEM/Substitute Numbers:
2607471, CB85434, CB85434PR, CMS40186, GS40186, RK622215
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front Right Lower |
- Front Suspension Arm And Tie Rod End Kit For Ford Explorer Police Interceptor
- TOR Front Suspension Control Arm Assembly And Tie Rod End Kit For Ford Explorer Police Interceptor Utility - Left Right Side (Driver Passenger) KTR-102908
- TOR
- Product Attributes:
- WebNameEbay4: For Ford Explorer Police Interceptor Front Suspension Arm And Tie Rod End Kit
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Control Arm And Ball Joint Assembly, 2x Tor Steering Tie Rod End
- ComponentsSummaryShort: 2x Control Arm W/ Ball Joint 2x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Lower Tor Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Tor Steering Tie Rod End (both Side)
- WebNamePlain: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit Ktr-102908
- ComponentsSummaryShortWithBrands: 2x Tor Control Arm W/ Ball Joint 2x Tor Tie Rod End
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Lower Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Steering Tie Rod End (both Side)
- WebNameLong: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For Ford Explorer Police Interceptor Utility - Left Right Side (driver Passenger) Ktr-102908
- WebNameShort: Front Suspension Control Arm Tie Rod End Kit For Ford Explorer Police Interceptor Utility Ktr-102908
- ComponentsSummaryRegular: 2x Suspension Control Arm And Ball Joint Assembly, 2x Steering Tie Rod End
- WebNameRegular: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For Ford Explorer Police Interceptor Utility - Left Right Side (driver Passenger) Ktr-102908
- WebNameEbay2: [front] Suspension Arm And Tie Rod End Kit For Ford Explorer Police Interceptor
- WebNameEbay3: Suspension Arm And Tie Rod End Front Kit For Ford Explorer Police Interceptor
- WebNameEbay: Front Suspension Arm And Tie Rod End Kit For Ford Explorer Police Interceptor
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
- Kit Variations: KTR-102789
- Part Reference Numbers : BK622216 CB85433PR CB85433 MS40185 GS40185 CMS40185 CK622216 K622216 RK622216 2607470 TK622216 BK622215 CB85434PR CB85434 MS40186 GS40186 CMS40186 CK622215 K622215 RK622215 2607471 TK622215 BES800952 TO86165PR TO86
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2607470, 2607471, 2693903, 522-759, 522-760, 539-080, CK622215, CK622216, CMS40185, CMS40186, ES800952, K622215, K622216, MS40185, MS40186, MS40646, RK622215, RK622216...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front |
- Front Suspension Arm And Tie Rod End Kit For Ford Explorer Police Interceptor
- TOR Front Suspension Control Arm Assembly And Tie Rod End Kit For Ford Explorer Police Interceptor Utility - Left Right Side (Driver Passenger) KTR-102789
- TOR
- Product Attributes:
- WebNameEbay4: For Ford Explorer Police Interceptor Front Suspension Arm And Tie Rod End Kit
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Control Arm And Ball Joint Assembly, 2x Tor Steering Tie Rod End
- ComponentsSummaryShort: 2x Control Arm W/ Ball Joint 2x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Lower Tor Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Tor Steering Tie Rod End (both Side)
- WebNamePlain: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit Ktr-102789
- ComponentsSummaryShortWithBrands: 2x Tor Control Arm W/ Ball Joint 2x Tor Tie Rod End
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Lower Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Steering Tie Rod End (both Side)
- WebNameLong: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For Ford Explorer Police Interceptor Utility - Left Right Side (driver Passenger) Ktr-102789
- WebNameShort: Front Suspension Control Arm Tie Rod End Kit For Ford Explorer Police Interceptor Utility Ktr-102789
- ComponentsSummaryRegular: 2x Suspension Control Arm And Ball Joint Assembly, 2x Steering Tie Rod End
- WebNameRegular: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For Ford Explorer Police Interceptor Utility - Left Right Side (driver Passenger) Ktr-102789
- WebNameEbay2: [front] Suspension Arm And Tie Rod End Kit For Ford Explorer Police Interceptor
- WebNameEbay3: Suspension Arm And Tie Rod End Front Kit For Ford Explorer Police Interceptor
- WebNameEbay: Front Suspension Arm And Tie Rod End Kit For Ford Explorer Police Interceptor
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
- Kit Variations: KTR-102908
- Part Reference Numbers : BK622216 CB85433PR CB85433 MS40185 GS40185 CMS40185 CK622216 K622216 RK622216 2607470 TK622216 BK622215 CB85434PR CB85434 MS40186 GS40186 CMS40186 CK622215 K622215 RK622215 2607471 TK622215 BES800952 TO86165PR TO86
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2607470, 2607471, 2693903, 522-759, 522-760, 539-080, CK622215, CK622216, CMS40185, CMS40186, ES800952, K622215, K622216, MS40185, MS40186, MS40646, RK622215, RK622216...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front |
- Front Right Lower Suspension Control Arm Ball Joint Assembly For Ford Explorer
- TOR Front Right (Passenger Side) Lower Suspension Control Arm Ball Joint Assembly TOR-CK622215 For Ford Explorer Police Interceptor Utility
- TOR
- Product Attributes:
- WebNameEbay4: For Front Right Lower Suspension Control Arm Ball Joint Assembly Tor-ck622215
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryShort: Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryLongWithBrands: 1x Front Right Lower Tor Suspension Control Arm And Ball Joint Assembly
- WebNamePlain: Tor Front Right (passenger Side) Lower Suspension Control Arm Ball Joint Assembly Tor-ck622215
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm And Ball Joint Assembly
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Right Lower Suspension Control Arm And Ball Joint Assembly
- WebNameLong: Tor Front Right (passenger Side) Lower Suspension Control Arm Ball Joint Assembly Tor-ck622215 For Ford Explorer Police Interceptor Utility
- WebNameShort: Front Right Lower Suspension Control Arm Ball Joint Assembly Tor-ck622215 For Ford Explorer Police
- ComponentsSummaryRegular: Suspension Control Arm And Ball Joint Assembly
- WebNameRegular: Tor Front Right (passenger Side) Lower Suspension Control Arm Ball Joint Assembly Tor-ck622215 For Ford Explorer Police Interceptor Utility
- WebNameEbay2: [front Right Lower] Suspension Control Arm Ball Joint Assembly Tor-ck622215 For
- WebNameEbay3: Suspension Control Arm Ball Joint Assembly Front Right Lower Tor-ck622215 For
- WebNameEbay: Front Right Lower Suspension Control Arm Ball Joint Assembly For Ford Explorer
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK622215 CB85434PR CB85434 MS40186 GS40186 CMS40186 CK622215 K622215 RK622215 2607471 TK622215
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2607471, 522-760, CB85434, CB85434PR, CK622215, CMS40186, GS40186, K622215, MS40186, RK622215, TK622215
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front Right Lower |
- Front Suspension Control Arm And Ball Joint Link Kit For Ford Explorer Police
- TOR Front Suspension Control Arm And Ball Joint Assembly Stabilizer Bar Link Kit For Ford Explorer Police Interceptor Utility - Left Right Side (Driver Passenger) KTR-100236
- TOR
- Product Attributes:
- WebNameEbay4: For Ford Explorer Police Front Suspension Control Arm And Ball Joint Link Kit
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Control Arm And Ball Joint Assembly, 2x Tor Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: 2x Control Arm W/ Ball Joint 2x Link Kit
- ComponentsSummaryLongWithBrands: 2x Front Lower Tor Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Tor Suspension Stabilizer Bar Link Kit (both Side)
- WebNamePlain: Tor Front Suspension Control Arm And Ball Joint Assembly Stabilizer Bar Link Kit Ktr-100236
- ComponentsSummaryShortWithBrands: 2x Tor Control Arm W/ Ball Joint 2x Tor Link Kit
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Lower Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Suspension Stabilizer Bar Link Kit (both Side)
- WebNameLong: Tor Front Suspension Control Arm And Ball Joint Assembly Stabilizer Bar Link Kit For Ford Explorer Police Interceptor Utility - Left Right Side (driver Passenger) Ktr-100236
- WebNameShort: Front Suspension Control Arm And Ball Joint Link Kit For Ford Explorer Police Interceptor Ktr-100236
- ComponentsSummaryRegular: 2x Suspension Control Arm And Ball Joint Assembly, 2x Suspension Stabilizer Bar Link Kit
- WebNameRegular: Tor Front Suspension Control Arm And Ball Joint Assembly Stabilizer Bar Link Kit For Ford Explorer Police Interceptor Utility - Left Right Side (driver Passenger) Ktr-100236
- WebNameEbay2: [front] Suspension Control Arm And Ball Joint Link Kit For Ford Explorer Police
- WebNameEbay3: Suspension Control Arm And Ball Joint Link Front Kit For Ford Explorer Police
- WebNameEbay: Front Suspension Control Arm And Ball Joint Link Kit For Ford Explorer Police
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
- Kit Variations: KTR-101462
- Part Reference Numbers : BK622216 CB85433PR CB85433 MS40185 GS40185 CMS40185 CK622216 K622216 RK622216 2607470 TK622216 BK622215 CB85434PR CB85434 MS40186 GS40186 CMS40186 CK622215 K622215 RK622215 2607471 TK622215 BK750616 SL85232XL SL852
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2607470, 2607471, 2653239, 2653240, 522-759, 522-760, CK622215, CK622216, CMS40185, CMS40186, K622215, K622216, K750616, K750617, MS40185, MS40186, MS40861, MS40862...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front |
- Front Left Lower Suspension Control Arm Ball Joint Assembly For Ford Explorer
- TOR Front Left (Driver Side) Lower Suspension Control Arm Ball Joint Assembly TOR-CK622216 For Ford Explorer Police Interceptor Utility
- TOR
- Product Attributes:
- WebNameEbay4: For Front Left Lower Suspension Control Arm Ball Joint Assembly Tor-ck622216
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryShort: Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryLongWithBrands: 1x Front Left Lower Tor Suspension Control Arm And Ball Joint Assembly
- WebNamePlain: Tor Front Left (driver Side) Lower Suspension Control Arm Ball Joint Assembly Tor-ck622216
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm And Ball Joint Assembly
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Left Lower Suspension Control Arm And Ball Joint Assembly
- WebNameLong: Tor Front Left (driver Side) Lower Suspension Control Arm Ball Joint Assembly Tor-ck622216 For Ford Explorer Police Interceptor Utility
- WebNameShort: Front Left Lower Suspension Control Arm Ball Joint Assembly Tor-ck622216 For Ford Explorer Police
- ComponentsSummaryRegular: Suspension Control Arm And Ball Joint Assembly
- WebNameRegular: Tor Front Left (driver Side) Lower Suspension Control Arm Ball Joint Assembly Tor-ck622216 For Ford Explorer Police Interceptor Utility
- WebNameEbay2: [front Left Lower] Suspension Control Arm Ball Joint Assembly Tor-ck622216 For
- WebNameEbay3: Suspension Control Arm Ball Joint Assembly Front Left Lower Tor-ck622216 For
- WebNameEbay: Front Left Lower Suspension Control Arm Ball Joint Assembly For Ford Explorer
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK622216 CB85433PR CB85433 MS40185 GS40185 CMS40185 CK622216 K622216 RK622216 2607470 TK622216
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2607470, 522-759, CB85433, CB85433PR, CK622216, CMS40185, GS40185, K622216, MS40185, RK622216, TK622216
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front Left Lower |
- Suspension Control Arm And Ball Joint Assembly
- Standard Design
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Mounting Hole Diameter: 12.7
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Articulación de rótula instalada: Sí
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Roscado
- Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Thread Diameter: 14
- Contenidos del paquete: Conjunto De Articulación De Rótula Y Brazo De Control De La Suspensión
- Control Arm Color:
- Black
- Negro
- Noir
- Control Arm Maximum Width: 288.5
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
1508066, 2607471, 2607471M, 623.65028, 6CB40487, 810-498327B, BB5Z3078A, BB5Z3078B, CB85434, CB85434PR, CK622215, CMS40186, CTXMS40186, GB5Z3078A, GB5Z3078B, GB5Z3078C, GB5Z3078D, GB5Z3078E...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Police Interceptor Utility | Front Right Lower |
Showing 1 - 10 of 17 products
Loading...